[PATCH v2 0/2] drm/sun4i: dw-hdmi: Improve CEC support

[Hans Verkuil]

Hi Jernej,

On 4/1/19 9:15 PM, Jernej Skrabec wrote:
> It turns out that additional logic between HDMI CEC controller and
> pins on PHY on some Allwinner SoCs prevents proper communication.
> It might be possible to fix it, but it's much easier and less error
> prone to just directly drive pins using software implementation of
> CEC protocol.

1) Please CC linux-media as well, I had almost missed this series.

2) Is this a SoC limitation or a board limitation?

3) Is the bit-banging support sunxi specific? Or is it still using some
   DW CEC functionality? It appears to be sunxi specific.

4) I had an old patch series: https://www.spinics.net/lists/dri-devel/msg170232.html

Rob Herring disagreed with that, but the discussion fizzled out at the end.
I still think doing this in the device tree is the right approach since this
is very much hardware related.

If the DW CEC implementation doesn't work for some reason (CEC pins not hooked up,
or for other reasons non-functional), then it should be disabled in the device
tree. So then adding a new SUN8I option to enable bitbanging CEC support seems
logical.

Regards,

	Hans

> 
> Let me know what do you think.
> 
> Best regards,
> Jernej
> 
> Changes from v1:
> - renamed is_cec_unusable to disable_cec
> - added review-by tag
> 
> Jernej Skrabec (2):
>   drm/bridge/synopsys: dw-hdmi: Add an option to suppress loading CEC
>     driver
>   drm/sun4i: dw-hdmi: Bit bang CEC on some SoCs
> 
>  drivers/gpu/drm/bridge/synopsys/dw-hdmi.c |  2 +-
>  drivers/gpu/drm/sun4i/Kconfig             | 10 +++
>  drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h     | 11 +++
>  drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c    | 83 ++++++++++++++++++++++-
>  include/drm/bridge/dw_hdmi.h              |  2 +
>  5 files changed, 105 insertions(+), 3 deletions(-)
>