[PATCHv2 09/22] drm/bridge: tc358767: move PXL PLL enable/disable to stream enable/disable

[Andrzej Hajda]

On 26.03.2019 11:31, Tomi Valkeinen wrote:
> We set up the PXL PLL inside tc_main_link_setup. This is unnecessary,
> and makes tc_main_link_setup depend on the video-mode, which should not
> be the case. As PXL PLL is used only for the video stream (and only when
> using the HW test pattern), let's move the PXL PLL setup into
> tc_stream_enable.
>
> Also, currently the PXL PLL is only disabled if the driver if removed.
> Let's disable the PXL PLL when the stream is disabled.
>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen at ti.com>
Reviewed-by: Andrzej Hajda <a.hajda at samsung.com>

 --
Regards
Andrzej