[PATCH 1/2] arm64: dts: mt8183: add dsi node

[CK Hu]

Hi, Jitao:

On Tue, 2019-04-16 at 16:54 +0800, Jitao Shi wrote:
> Add dsi and mipitx nodes to the mt8183
> 
> Signed-off-by: Jitao Shi <jitao.shi at mediatek.com>
> ---
>  arch/arm64/boot/dts/mediatek/mt8183.dtsi | 25 ++++++++++++++++++++++++
>  1 file changed, 25 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> index b36e37fcdfe3..80929a0e5a6f 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> @@ -353,6 +353,16 @@
>  			status = "disabled";
>  		};
>  
> +		mipi_tx0: mipi-dphy at 11e50000 {
> +			compatible = "mediatek,mt8183-mipi-tx";
> +			reg = <0 0x11e50000 0 0x1000>;
> +			clocks = <&apmixedsys CLK_APMIXED_MIPID0_26M>;
> +			clock-names = "ref_clk";
> +			#clock-cells = <0>;
> +			#phy-cells = <0>;
> +			clock-output-names = "mipi_tx0_pll";
> +		};
> +
>  		mfgcfg: syscon at 13000000 {
>  			compatible = "mediatek,mt8183-mfgcfg", "syscon";
>  			reg = <0 0x13000000 0 0x1000>;
> @@ -365,6 +375,21 @@
>  			#clock-cells = <1>;
>  		};
>  
> +		dsi0: dsi at 14014000 {
> +			compatible = "mediatek,mt8173-dsi",
> +				"mediatek,mt8183-dsi";

I think you could directly remove "mediatek,mt8173-dsi".

Regards,
CK

> +			reg = <0 0x14014000 0 0x1000>;
> +			interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_LOW>;
> +			power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
> +			mediatek,syscon-dsi = <&mmsys 0x140>;
> +			clocks = <&mmsys CLK_MM_DSI0_MM>,
> +				<&mmsys CLK_MM_DSI0_IF>,
> +				<&mipi_tx0>;
> +			clock-names = "engine", "digital", "hs";
> +			phys = <&mipi_tx0>;
> +			phy-names = "dphy";
> +		};
> +
>  		smi_common: smi at 14019000 {
>  			compatible = "mediatek,mt8183-smi-common", "syscon";
>  			reg = <0 0x14019000 0 0x1000>;