[PATCH v3 01/11] drm/atomic: Move __drm_atomic_helper_disable_plane/set_config()
Noralf Trønnes
noralf at tronnes.org
Sat Apr 20 10:45:46 UTC 2019
Prepare for moving drm_fb_helper modesetting code to drm_client.
drm_client will be linked to drm.ko, so move
__drm_atomic_helper_disable_plane() and __drm_atomic_helper_set_config()
out of drm_kms_helper.ko.
While at it, fix two checkpatch complaints:
- WARNING: Block comments use a trailing */ on a separate line
- CHECK: Alignment should match open parenthesis
Signed-off-by: Noralf Trønnes <noralf at tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter at ffwll.ch>
Reviewed-by: Maxime Ripard <maxime.ripard at bootlin.com>
---
drivers/gpu/drm/drm_atomic.c | 168 ++++++++++++++++++++++++++++
drivers/gpu/drm/drm_atomic_helper.c | 164 ---------------------------
drivers/gpu/drm/drm_crtc_internal.h | 5 +
include/drm/drm_atomic_helper.h | 4 -
4 files changed, 173 insertions(+), 168 deletions(-)
diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c
index 5eb40130fafb..c3a9ffbf2310 100644
--- a/drivers/gpu/drm/drm_atomic.c
+++ b/drivers/gpu/drm/drm_atomic.c
@@ -1130,6 +1130,174 @@ int drm_atomic_nonblocking_commit(struct drm_atomic_state *state)
}
EXPORT_SYMBOL(drm_atomic_nonblocking_commit);
+/* just used from drm-client and atomic-helper: */
+int __drm_atomic_helper_disable_plane(struct drm_plane *plane,
+ struct drm_plane_state *plane_state)
+{
+ int ret;
+
+ ret = drm_atomic_set_crtc_for_plane(plane_state, NULL);
+ if (ret != 0)
+ return ret;
+
+ drm_atomic_set_fb_for_plane(plane_state, NULL);
+ plane_state->crtc_x = 0;
+ plane_state->crtc_y = 0;
+ plane_state->crtc_w = 0;
+ plane_state->crtc_h = 0;
+ plane_state->src_x = 0;
+ plane_state->src_y = 0;
+ plane_state->src_w = 0;
+ plane_state->src_h = 0;
+
+ return 0;
+}
+EXPORT_SYMBOL(__drm_atomic_helper_disable_plane);
+
+static int update_output_state(struct drm_atomic_state *state,
+ struct drm_mode_set *set)
+{
+ struct drm_device *dev = set->crtc->dev;
+ struct drm_crtc *crtc;
+ struct drm_crtc_state *new_crtc_state;
+ struct drm_connector *connector;
+ struct drm_connector_state *new_conn_state;
+ int ret, i;
+
+ ret = drm_modeset_lock(&dev->mode_config.connection_mutex,
+ state->acquire_ctx);
+ if (ret)
+ return ret;
+
+ /* First disable all connectors on the target crtc. */
+ ret = drm_atomic_add_affected_connectors(state, set->crtc);
+ if (ret)
+ return ret;
+
+ for_each_new_connector_in_state(state, connector, new_conn_state, i) {
+ if (new_conn_state->crtc == set->crtc) {
+ ret = drm_atomic_set_crtc_for_connector(new_conn_state,
+ NULL);
+ if (ret)
+ return ret;
+
+ /* Make sure legacy setCrtc always re-trains */
+ new_conn_state->link_status = DRM_LINK_STATUS_GOOD;
+ }
+ }
+
+ /* Then set all connectors from set->connectors on the target crtc */
+ for (i = 0; i < set->num_connectors; i++) {
+ new_conn_state = drm_atomic_get_connector_state(state,
+ set->connectors[i]);
+ if (IS_ERR(new_conn_state))
+ return PTR_ERR(new_conn_state);
+
+ ret = drm_atomic_set_crtc_for_connector(new_conn_state,
+ set->crtc);
+ if (ret)
+ return ret;
+ }
+
+ for_each_new_crtc_in_state(state, crtc, new_crtc_state, i) {
+ /*
+ * Don't update ->enable for the CRTC in the set_config request,
+ * since a mismatch would indicate a bug in the upper layers.
+ * The actual modeset code later on will catch any
+ * inconsistencies here.
+ */
+ if (crtc == set->crtc)
+ continue;
+
+ if (!new_crtc_state->connector_mask) {
+ ret = drm_atomic_set_mode_prop_for_crtc(new_crtc_state,
+ NULL);
+ if (ret < 0)
+ return ret;
+
+ new_crtc_state->active = false;
+ }
+ }
+
+ return 0;
+}
+
+/* just used from drm-client and atomic-helper: */
+int __drm_atomic_helper_set_config(struct drm_mode_set *set,
+ struct drm_atomic_state *state)
+{
+ struct drm_crtc_state *crtc_state;
+ struct drm_plane_state *primary_state;
+ struct drm_crtc *crtc = set->crtc;
+ int hdisplay, vdisplay;
+ int ret;
+
+ crtc_state = drm_atomic_get_crtc_state(state, crtc);
+ if (IS_ERR(crtc_state))
+ return PTR_ERR(crtc_state);
+
+ primary_state = drm_atomic_get_plane_state(state, crtc->primary);
+ if (IS_ERR(primary_state))
+ return PTR_ERR(primary_state);
+
+ if (!set->mode) {
+ WARN_ON(set->fb);
+ WARN_ON(set->num_connectors);
+
+ ret = drm_atomic_set_mode_for_crtc(crtc_state, NULL);
+ if (ret != 0)
+ return ret;
+
+ crtc_state->active = false;
+
+ ret = drm_atomic_set_crtc_for_plane(primary_state, NULL);
+ if (ret != 0)
+ return ret;
+
+ drm_atomic_set_fb_for_plane(primary_state, NULL);
+
+ goto commit;
+ }
+
+ WARN_ON(!set->fb);
+ WARN_ON(!set->num_connectors);
+
+ ret = drm_atomic_set_mode_for_crtc(crtc_state, set->mode);
+ if (ret != 0)
+ return ret;
+
+ crtc_state->active = true;
+
+ ret = drm_atomic_set_crtc_for_plane(primary_state, crtc);
+ if (ret != 0)
+ return ret;
+
+ drm_mode_get_hv_timing(set->mode, &hdisplay, &vdisplay);
+
+ drm_atomic_set_fb_for_plane(primary_state, set->fb);
+ primary_state->crtc_x = 0;
+ primary_state->crtc_y = 0;
+ primary_state->crtc_w = hdisplay;
+ primary_state->crtc_h = vdisplay;
+ primary_state->src_x = set->x << 16;
+ primary_state->src_y = set->y << 16;
+ if (drm_rotation_90_or_270(primary_state->rotation)) {
+ primary_state->src_w = vdisplay << 16;
+ primary_state->src_h = hdisplay << 16;
+ } else {
+ primary_state->src_w = hdisplay << 16;
+ primary_state->src_h = vdisplay << 16;
+ }
+
+commit:
+ ret = update_output_state(state, set);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+EXPORT_SYMBOL(__drm_atomic_helper_set_config);
+
void drm_atomic_print_state(const struct drm_atomic_state *state)
{
struct drm_printer p = drm_info_printer(state->dev->dev);
diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c
index 86efd2da37f9..4094dcb11798 100644
--- a/drivers/gpu/drm/drm_atomic_helper.c
+++ b/drivers/gpu/drm/drm_atomic_helper.c
@@ -2842,95 +2842,6 @@ int drm_atomic_helper_disable_plane(struct drm_plane *plane,
}
EXPORT_SYMBOL(drm_atomic_helper_disable_plane);
-/* just used from fb-helper and atomic-helper: */
-int __drm_atomic_helper_disable_plane(struct drm_plane *plane,
- struct drm_plane_state *plane_state)
-{
- int ret;
-
- ret = drm_atomic_set_crtc_for_plane(plane_state, NULL);
- if (ret != 0)
- return ret;
-
- drm_atomic_set_fb_for_plane(plane_state, NULL);
- plane_state->crtc_x = 0;
- plane_state->crtc_y = 0;
- plane_state->crtc_w = 0;
- plane_state->crtc_h = 0;
- plane_state->src_x = 0;
- plane_state->src_y = 0;
- plane_state->src_w = 0;
- plane_state->src_h = 0;
-
- return 0;
-}
-
-static int update_output_state(struct drm_atomic_state *state,
- struct drm_mode_set *set)
-{
- struct drm_device *dev = set->crtc->dev;
- struct drm_crtc *crtc;
- struct drm_crtc_state *new_crtc_state;
- struct drm_connector *connector;
- struct drm_connector_state *new_conn_state;
- int ret, i;
-
- ret = drm_modeset_lock(&dev->mode_config.connection_mutex,
- state->acquire_ctx);
- if (ret)
- return ret;
-
- /* First disable all connectors on the target crtc. */
- ret = drm_atomic_add_affected_connectors(state, set->crtc);
- if (ret)
- return ret;
-
- for_each_new_connector_in_state(state, connector, new_conn_state, i) {
- if (new_conn_state->crtc == set->crtc) {
- ret = drm_atomic_set_crtc_for_connector(new_conn_state,
- NULL);
- if (ret)
- return ret;
-
- /* Make sure legacy setCrtc always re-trains */
- new_conn_state->link_status = DRM_LINK_STATUS_GOOD;
- }
- }
-
- /* Then set all connectors from set->connectors on the target crtc */
- for (i = 0; i < set->num_connectors; i++) {
- new_conn_state = drm_atomic_get_connector_state(state,
- set->connectors[i]);
- if (IS_ERR(new_conn_state))
- return PTR_ERR(new_conn_state);
-
- ret = drm_atomic_set_crtc_for_connector(new_conn_state,
- set->crtc);
- if (ret)
- return ret;
- }
-
- for_each_new_crtc_in_state(state, crtc, new_crtc_state, i) {
- /* Don't update ->enable for the CRTC in the set_config request,
- * since a mismatch would indicate a bug in the upper layers.
- * The actual modeset code later on will catch any
- * inconsistencies here. */
- if (crtc == set->crtc)
- continue;
-
- if (!new_crtc_state->connector_mask) {
- ret = drm_atomic_set_mode_prop_for_crtc(new_crtc_state,
- NULL);
- if (ret < 0)
- return ret;
-
- new_crtc_state->active = false;
- }
- }
-
- return 0;
-}
-
/**
* drm_atomic_helper_set_config - set a new config from userspace
* @set: mode set configuration
@@ -2975,81 +2886,6 @@ int drm_atomic_helper_set_config(struct drm_mode_set *set,
}
EXPORT_SYMBOL(drm_atomic_helper_set_config);
-/* just used from fb-helper and atomic-helper: */
-int __drm_atomic_helper_set_config(struct drm_mode_set *set,
- struct drm_atomic_state *state)
-{
- struct drm_crtc_state *crtc_state;
- struct drm_plane_state *primary_state;
- struct drm_crtc *crtc = set->crtc;
- int hdisplay, vdisplay;
- int ret;
-
- crtc_state = drm_atomic_get_crtc_state(state, crtc);
- if (IS_ERR(crtc_state))
- return PTR_ERR(crtc_state);
-
- primary_state = drm_atomic_get_plane_state(state, crtc->primary);
- if (IS_ERR(primary_state))
- return PTR_ERR(primary_state);
-
- if (!set->mode) {
- WARN_ON(set->fb);
- WARN_ON(set->num_connectors);
-
- ret = drm_atomic_set_mode_for_crtc(crtc_state, NULL);
- if (ret != 0)
- return ret;
-
- crtc_state->active = false;
-
- ret = drm_atomic_set_crtc_for_plane(primary_state, NULL);
- if (ret != 0)
- return ret;
-
- drm_atomic_set_fb_for_plane(primary_state, NULL);
-
- goto commit;
- }
-
- WARN_ON(!set->fb);
- WARN_ON(!set->num_connectors);
-
- ret = drm_atomic_set_mode_for_crtc(crtc_state, set->mode);
- if (ret != 0)
- return ret;
-
- crtc_state->active = true;
-
- ret = drm_atomic_set_crtc_for_plane(primary_state, crtc);
- if (ret != 0)
- return ret;
-
- drm_mode_get_hv_timing(set->mode, &hdisplay, &vdisplay);
-
- drm_atomic_set_fb_for_plane(primary_state, set->fb);
- primary_state->crtc_x = 0;
- primary_state->crtc_y = 0;
- primary_state->crtc_w = hdisplay;
- primary_state->crtc_h = vdisplay;
- primary_state->src_x = set->x << 16;
- primary_state->src_y = set->y << 16;
- if (drm_rotation_90_or_270(primary_state->rotation)) {
- primary_state->src_w = vdisplay << 16;
- primary_state->src_h = hdisplay << 16;
- } else {
- primary_state->src_w = hdisplay << 16;
- primary_state->src_h = vdisplay << 16;
- }
-
-commit:
- ret = update_output_state(state, set);
- if (ret)
- return ret;
-
- return 0;
-}
-
/**
* drm_atomic_helper_disable_all - disable all currently active outputs
* @dev: DRM device
diff --git a/drivers/gpu/drm/drm_crtc_internal.h b/drivers/gpu/drm/drm_crtc_internal.h
index 216f2a9ee3d4..22a63a544ec7 100644
--- a/drivers/gpu/drm/drm_crtc_internal.h
+++ b/drivers/gpu/drm/drm_crtc_internal.h
@@ -207,6 +207,11 @@ struct drm_minor;
int drm_atomic_debugfs_init(struct drm_minor *minor);
#endif
+int __drm_atomic_helper_disable_plane(struct drm_plane *plane,
+ struct drm_plane_state *plane_state);
+int __drm_atomic_helper_set_config(struct drm_mode_set *set,
+ struct drm_atomic_state *state);
+
void drm_atomic_print_state(const struct drm_atomic_state *state);
/* drm_atomic_uapi.c */
diff --git a/include/drm/drm_atomic_helper.h b/include/drm/drm_atomic_helper.h
index 58214be3bf3d..bf4e07141d81 100644
--- a/include/drm/drm_atomic_helper.h
+++ b/include/drm/drm_atomic_helper.h
@@ -117,12 +117,8 @@ int drm_atomic_helper_update_plane(struct drm_plane *plane,
struct drm_modeset_acquire_ctx *ctx);
int drm_atomic_helper_disable_plane(struct drm_plane *plane,
struct drm_modeset_acquire_ctx *ctx);
-int __drm_atomic_helper_disable_plane(struct drm_plane *plane,
- struct drm_plane_state *plane_state);
int drm_atomic_helper_set_config(struct drm_mode_set *set,
struct drm_modeset_acquire_ctx *ctx);
-int __drm_atomic_helper_set_config(struct drm_mode_set *set,
- struct drm_atomic_state *state);
int drm_atomic_helper_disable_all(struct drm_device *dev,
struct drm_modeset_acquire_ctx *ctx);
--
2.20.1
More information about the dri-devel
mailing list