[PATCH] drm/bridge: adv7511: Fix low refresh rate selection

[Matt Redfearn]

The driver currently sets register 0xfb (Low Refresh Rate) based on the
value of mode->vrefresh. Firstly, this field is specified to be in Hz,
but the magic numbers used by the code are Hz * 1000. This essentially
leads to the low refresh rate always being set to 0x01, since the
vrefresh value will always be less than 24000. Fix the magic numbers to
be in Hz.
Secondly, according to the comment in drm_modes.h, the field is not
supposed to be used in a functional way anyway. Instead, use the helper
function drm_mode_vrefresh().

Fixes: 9c8af882bf12 ("drm: Add adv7511 encoder driver")
Signed-off-by: Matt Redfearn <matt.redfearn at thinci.com>

---

 drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
index 85c2d407a52..e7ddd3e3db9 100644
--- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
@@ -747,11 +747,11 @@ static void adv7511_mode_set(struct adv7511 *adv7511,
 			vsync_polarity = 1;
 	}
 
-	if (mode->vrefresh <= 24000)
+	if (drm_mode_vrefresh(mode) <= 24)
 		low_refresh_rate = ADV7511_LOW_REFRESH_RATE_24HZ;
-	else if (mode->vrefresh <= 25000)
+	else if (drm_mode_vrefresh(mode) <= 25)
 		low_refresh_rate = ADV7511_LOW_REFRESH_RATE_25HZ;
-	else if (mode->vrefresh <= 30000)
+	else if (drm_mode_vrefresh(mode) <= 30)
 		low_refresh_rate = ADV7511_LOW_REFRESH_RATE_30HZ;
 	else
 		low_refresh_rate = ADV7511_LOW_REFRESH_RATE_NONE;
-- 
2.17.1