[PATCH] [v7, 2/2] drm/panel: Add Boe Himax8279d MIPI-DSI LCD panel

[Jerry Han]

Thanks for your help

Both mailbox accounts are mine.
I don't know what to do next.
Do I need to resubmit the patch[V7]?


Thierry Reding <thierry.reding at gmail.com> 于2019年4月23日周二 下午8:08写道：

> On Tue, Mar 26, 2019 at 03:09:33PM +0800, Jerry Han wrote:
> > Support Boe Himax8279d 8.0" 1200x1920 TFT LCD panel, it is a MIPI DSI
> > panel.
> >
> > V7:
> > - Add the information of the reviewer
> > - Remove unnecessary delays, The udelay_range code gracefully returns
> >     without hitting the scheduler on a delay of 0. (Derek)
> > - Merge the same data structures, like display_mode and off_cmds (Derek)
> > - Optimize the processing of results returned by
> >     devm_gpiod_get_optional (Derek)
> >
> > V6:
> > - Add the information of the reviewer (Sam)
> > - Delete unnecessary header files #include <linux/fb.h> (Sam)
> > - The config DRM_PANEL_BOE_HIMAX8279D appears twice. Drop one of them
> (Sam)
> > - ADD static, set_gpios function is not used outside this module (Sam)
> >
> > V5:
> > - Added changelog
> >
> > V4:
> > - Frefix all function maes with boe_ (Sam)
> > - Fsed "enable_gpio" replace "reset_gpio", Make it look clearer (Sam)
> > - Sort include lines alphabetically (Sam)
> > - Fixed entries in the makefile must be sorted alphabetically (Sam)
> > - Add send_mipi_cmds function to avoid duplicating the code (Sam)
> > - Add the necessary delay(reset_delay_t5) between reset and sending
> >     the initialization command (Rock wang)
> >
> > V3:
> > - Remove unnecessary delays in sending initialization commands (Jitao
> Shi)
> >
> > V2:
> > - Use SPDX identifier (Sam)
> > - Use necessary header files replace drmP.h (Sam)
> > - Delete unnecessary header files #include <linux/err.h> (Sam)
> > - Specifies a GPIOs array to control the reset timing,
> >     instead of reading "dsi-reset-sequence" data from DTS (Sam)
> > - Delete backlight_disable() function when already disabled (Sam)
> > - Use devm_of_find_backlight() replace of_find_backlight_by_node() (Sam)
> > - Move the necessary data in the DTS to the current file,
> >     like porch, display_mode and Init code etc. (Sam)
> > - Add compatible device "boe,himax8279d10p" (Sam)
> >
> > Signed-off-by: Jerry Han <hanxu5 at huaqin.corp-partner.google.com>
>
> The sign-off identity doesn't match the authorship information in the
> patch. You may want to fix your git configuration.
>
> Thierry
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20190425/f144b719/attachment-0001.html>