drm/komeda: Add support for generation of CRC data per frame.
Brian Starkey
Brian.Starkey at arm.com
Fri Aug 2 10:13:03 UTC 2019
Hi Daniel,
On Fri, Aug 02, 2019 at 11:52:11AM +0200, Daniel Vetter wrote:
> On Fri, Aug 2, 2019 at 11:39 AM Brian Starkey <Brian.Starkey at arm.com> wrote:
> >
> > Hi Liviu,
> >
> > On Thu, Aug 01, 2019 at 11:42:31AM +0100, Liviu Dudau wrote:
> > > Komeda has support to generate per-frame CRC values in the DOU
> > > backend subsystem. Implement necessary hooks to expose the CRC
> > > "control" and "data" file over debugfs and program the DOUx_BS
> > > accordingly.
> > >
> > > This patch makes use of PL1 (programmable line 1) interrupt to
> > > know when the CRC generation has finished.
> > >
> > > Patch is also dependent on the series that adds dual-link support
> > > for komeda: https://patchwork.freedesktop.org/series/62280/
> > >
> > > Cc: "james qian wang (Arm Technology China)" <james.qian.wang at arm.com>
> > > Signed-off-by: Liviu Dudau <liviu.dudau at arm.com>
> > > ---
> > > .../arm/display/komeda/d71/d71_component.c | 2 +-
> > > .../gpu/drm/arm/display/komeda/d71/d71_dev.c | 29 ++++++++-
> > > .../gpu/drm/arm/display/komeda/komeda_crtc.c | 61 ++++++++++++++++++-
> > > .../gpu/drm/arm/display/komeda/komeda_dev.h | 2 +
> > > .../gpu/drm/arm/display/komeda/komeda_kms.h | 3 +
> > > .../drm/arm/display/komeda/komeda_pipeline.h | 1 +
> > > 6 files changed, 94 insertions(+), 4 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/arm/display/komeda/d71/d71_component.c b/drivers/gpu/drm/arm/display/komeda/d71/d71_component.c
> > > index 55a8cc94808a1..3c45468848ee4 100644
> > > --- a/drivers/gpu/drm/arm/display/komeda/d71/d71_component.c
> > > +++ b/drivers/gpu/drm/arm/display/komeda/d71/d71_component.c
> > > @@ -1061,7 +1061,7 @@ static void d71_timing_ctrlr_update(struct komeda_component *c,
> > > malidp_write32(reg, BS_PREFETCH_LINE, D71_DEFAULT_PREPRETCH_LINE);
> > >
> > > /* configure bs control register */
> > > - value = BS_CTRL_EN | BS_CTRL_VM;
> > > + value = BS_CTRL_EN | BS_CTRL_VM | BS_CTRL_CRC;
> > > if (c->pipeline->dual_link) {
> > > malidp_write32(reg, BS_DRIFT_TO, hfront_porch + 16);
> > > value |= BS_CTRL_DL;
> > > diff --git a/drivers/gpu/drm/arm/display/komeda/d71/d71_dev.c b/drivers/gpu/drm/arm/display/komeda/d71/d71_dev.c
> > > index d567ab7ed314e..05bfd9891c540 100644
> > > --- a/drivers/gpu/drm/arm/display/komeda/d71/d71_dev.c
> > > +++ b/drivers/gpu/drm/arm/display/komeda/d71/d71_dev.c
> > > @@ -115,6 +115,8 @@ static u64 get_dou_event(struct d71_pipeline *d71_pipeline)
> > > raw_status = malidp_read32(reg, BLK_IRQ_RAW_STATUS);
> > > if (raw_status & DOU_IRQ_PL0)
> > > evts |= KOMEDA_EVENT_VSYNC;
> > > + if (raw_status & DOU_IRQ_PL1)
> > > + evts |= KOMEDA_EVENT_CRCDONE;
> > > if (raw_status & DOU_IRQ_UND)
> > > evts |= KOMEDA_EVENT_URUN;
> > >
> > > @@ -149,7 +151,7 @@ static u64 get_dou_event(struct d71_pipeline *d71_pipeline)
> > >
> > > static u64 get_pipeline_event(struct d71_pipeline *d71_pipeline, u32 gcu_status)
> > > {
> > > - u32 evts = 0ULL;
> > > + u64 evts = 0ULL;
> > >
> > > if (gcu_status & (GLB_IRQ_STATUS_LPU0 | GLB_IRQ_STATUS_LPU1))
> > > evts |= get_lpu_event(d71_pipeline);
> > > @@ -163,6 +165,26 @@ static u64 get_pipeline_event(struct d71_pipeline *d71_pipeline, u32 gcu_status)
> > > return evts;
> > > }
> > >
> > > +static void get_frame_crcs(struct d71_pipeline *d71_pipeline, u32 pipe,
> > > + struct komeda_events *evts)
> > > +{
> > > + if (evts->pipes[pipe] & KOMEDA_EVENT_CRCDONE) {
> > > + struct komeda_component *c;
> > > +
> > > + c = komeda_pipeline_get_component(&d71_pipeline->base,
> > > + KOMEDA_COMPONENT_TIMING_CTRLR);
> > > + if (!c)
> > > + return;
> > > +
> > > + evts->crcs[pipe][0] = malidp_read32(c->reg, BS_CRC0_LOW);
> > > + evts->crcs[pipe][1] = malidp_read32(c->reg, BS_CRC0_HIGH);
> > > + if (d71_pipeline->base.dual_link) {
> > > + evts->crcs[pipe][2] = malidp_read32(c->reg, BS_CRC1_LOW);
> > > + evts->crcs[pipe][3] = malidp_read32(c->reg, BS_CRC1_HIGH);
> > > + }
> > > + }
> > > +}
> > > +
> > > static irqreturn_t
> > > d71_irq_handler(struct komeda_dev *mdev, struct komeda_events *evts)
> > > {
> > > @@ -195,6 +217,9 @@ d71_irq_handler(struct komeda_dev *mdev, struct komeda_events *evts)
> > > if (gcu_status & GLB_IRQ_STATUS_PIPE1)
> > > evts->pipes[1] |= get_pipeline_event(d71->pipes[1], gcu_status);
> > >
> > > + get_frame_crcs(d71->pipes[0], 0, evts);
> > > + get_frame_crcs(d71->pipes[1], 1, evts);
> > > +
> > > return gcu_status ? IRQ_HANDLED : IRQ_NONE;
> > > }
> > >
> > > @@ -202,7 +227,7 @@ d71_irq_handler(struct komeda_dev *mdev, struct komeda_events *evts)
> > > GCU_IRQ_MODE | GCU_IRQ_ERR)
> > > #define ENABLED_LPU_IRQS (LPU_IRQ_IBSY | LPU_IRQ_ERR | LPU_IRQ_EOW)
> > > #define ENABLED_CU_IRQS (CU_IRQ_OVR | CU_IRQ_ERR)
> > > -#define ENABLED_DOU_IRQS (DOU_IRQ_UND | DOU_IRQ_ERR)
> > > +#define ENABLED_DOU_IRQS (DOU_IRQ_UND | DOU_IRQ_ERR | DOU_IRQ_PL1)
> > >
> > > static int d71_enable_irq(struct komeda_dev *mdev)
> > > {
> > > diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_crtc.c b/drivers/gpu/drm/arm/display/komeda/komeda_crtc.c
> > > index fa9a4593bb375..4b9f5d33e999d 100644
> > > --- a/drivers/gpu/drm/arm/display/komeda/komeda_crtc.c
> > > +++ b/drivers/gpu/drm/arm/display/komeda/komeda_crtc.c
> > > @@ -207,10 +207,13 @@ void komeda_crtc_handle_event(struct komeda_crtc *kcrtc,
> > > drm_crtc_send_vblank_event(crtc, event);
> > > } else {
> > > DRM_WARN("CRTC[%d]: FLIP happen but no pending commit.\n",
> > > - drm_crtc_index(&kcrtc->base));
> > > + drm_crtc_index(crtc));
> > > }
> > > spin_unlock_irqrestore(&crtc->dev->event_lock, flags);
> > > }
> > > +
> > > + if ((kcrtc->crc_enabled) && (events & KOMEDA_EVENT_CRCDONE))
> > > + drm_crtc_add_crc_entry(crtc, false, 0, evts->crcs[kcrtc->master->id]);
> > > }
> > >
> > > static void
> > > @@ -487,6 +490,59 @@ static void komeda_crtc_vblank_disable(struct drm_crtc *crtc)
> > > mdev->funcs->on_off_vblank(mdev, kcrtc->master->id, false);
> > > }
> > >
> > > +static const char * const komeda_pipe_crc_sources[] = {"auto"};
> > > +
> > > +static const char *const *komeda_crtc_get_crc_sources(struct drm_crtc *crtc,
> > > + size_t *count)
> > > +{
> > > + *count = ARRAY_SIZE(komeda_pipe_crc_sources);
> > > + return komeda_pipe_crc_sources;
> > > +}
> > > +
> > > +static int komeda_crtc_parse_crc_source(const char *source)
> > > +{
> > > + if (!source)
> > > + return 0;
> > > + if (strcmp(source, "auto") == 0)
> > > + return 1;
> > > +
> > > + return -EINVAL;
> > > +}
> > > +
> > > +static int komeda_crtc_verify_crc_source(struct drm_crtc *crtc,
> > > + const char *source_name,
> > > + size_t *values_count)
> > > +{
> > > + struct komeda_crtc *kcrtc = to_kcrtc(crtc);
> > > + int source = komeda_crtc_parse_crc_source(source_name);
> > > +
> > > + if (source < 0) {
> > > + DRM_DEBUG_DRIVER("Unknown or invalid CRC source for CRTC%d\n",
> > > + drm_crtc_index(crtc));
> > > + return -EINVAL;
> > > + }
> > > +
> > > + *values_count = kcrtc->master->dual_link ? 4 : 2;
> >
> > Can CRC generation continue across a modeset? If so I think we could
> > end up with a case where dual_link changes while CRC is active. Maybe
> > we should just always return 4 values, but set the third and fourth
> > values to 0 in the event handler, if dual-link isn't active.
>
> Modeset is allowed to destry the crc setup. Maybe not the smartest
> decision (it prevents us from making sure the first frame is perfect),
> but pretty deeply in-grained into tests by now. If we want to move
> this I think first step would be to add new basic testcases to igt to
> validate crc generation against modesets (maybe start with dpms
> off/on, then suspend/resume, then full modesets). Really not sure
> there's a need, and I've seen too many cases like this where crc
> generation changes depending upon modeset (bpp, routing, ...) to
> assume we can just make it work.
>
> I'd not bother and leave things as-is.
OK good, glad we're not alone. Do we need to do anything specific to
stop/reconfigure generation over modeset, or we just rely on userspace
to reconfigure?
Thanks,
-Brian
> -Daniel
> >
> > Cheers,
> > -Brian
> >
More information about the dri-devel
mailing list