[PATCH v1 11/16] drm/panel: move drm_panel functions to .c file

[Sam Ravnborg]

Move inline functions from include/drm/drm_panel.h to drm_panel.c.
This is in preparation for follow-up patches that will add extra
logic to the functions.
As they are no longer static inline, EXPORT them.

Signed-off-by: Sam Ravnborg <sam at ravnborg.org>
Cc: Thierry Reding <thierry.reding at gmail.com>
Cc: Sam Ravnborg <sam at ravnborg.org>
Cc: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
Cc: Maxime Ripard <maxime.ripard at bootlin.com>
Cc: Sean Paul <sean at poorly.run>
Cc: David Airlie <airlied at linux.ie>
Cc: Daniel Vetter <daniel at ffwll.ch>
---
 drivers/gpu/drm/drm_panel.c | 96 +++++++++++++++++++++++++++++++++++
 include/drm/drm_panel.h     | 99 +++----------------------------------
 2 files changed, 104 insertions(+), 91 deletions(-)

diff --git a/drivers/gpu/drm/drm_panel.c b/drivers/gpu/drm/drm_panel.c
index dbd5b873e8f2..9946b8d9bacc 100644
--- a/drivers/gpu/drm/drm_panel.c
+++ b/drivers/gpu/drm/drm_panel.c
@@ -54,6 +54,102 @@ void drm_panel_init(struct drm_panel *panel)
 }
 EXPORT_SYMBOL(drm_panel_init);
 
+/**
+ * drm_panel_prepare - power on a panel
+ * @panel: DRM panel
+ *
+ * Calling this function will enable power and deassert any reset signals to
+ * the panel. After this has completed it is possible to communicate with any
+ * integrated circuitry via a command bus.
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int drm_panel_prepare(struct drm_panel *panel)
+{
+	if (panel && panel->funcs && panel->funcs->prepare)
+		return panel->funcs->prepare(panel);
+
+	return panel ? -ENOSYS : -EINVAL;
+}
+EXPORT_SYMBOL(drm_panel_prepare);
+
+/**
+ * drm_panel_enable - enable a panel
+ * @panel: DRM panel
+ *
+ * Calling this function will cause the panel display drivers to be turned on
+ * and the backlight to be enabled. Content will be visible on screen after
+ * this call completes.
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int drm_panel_enable(struct drm_panel *panel)
+{
+	if (panel && panel->funcs && panel->funcs->enable)
+		return panel->funcs->enable(panel);
+
+	return panel ? -ENOSYS : -EINVAL;
+}
+EXPORT_SYMBOL(drm_panel_enable);
+
+/**
+ * drm_panel_disable - disable a panel
+ * @panel: DRM panel
+ *
+ * This will typically turn off the panel's backlight or disable the display
+ * drivers. For smart panels it should still be possible to communicate with
+ * the integrated circuitry via any command bus after this call.
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int drm_panel_disable(struct drm_panel *panel)
+{
+	if (panel && panel->funcs && panel->funcs->disable)
+		return panel->funcs->disable(panel);
+
+	return panel ? -ENOSYS : -EINVAL;
+}
+EXPORT_SYMBOL(drm_panel_disable);
+
+/**
+ * drm_panel_unprepare - power off a panel
+ * @panel: DRM panel
+ *
+ * Calling this function will completely power off a panel (assert the panel's
+ * reset, turn off power supplies, ...). After this function has completed, it
+ * is usually no longer possible to communicate with the panel until another
+ * call to drm_panel_prepare().
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int drm_panel_unprepare(struct drm_panel *panel)
+{
+	if (panel && panel->funcs && panel->funcs->unprepare)
+		return panel->funcs->unprepare(panel);
+
+	return panel ? -ENOSYS : -EINVAL;
+}
+EXPORT_SYMBOL(drm_panel_unprepare);
+
+/**
+ * drm_panel_get_modes - probe the available display modes of a panel
+ * @panel: DRM panel
+ *
+ * The modes probed from the panel are automatically added to the connector
+ * that the panel is attached to.
+ *
+ * Return: The number of modes available from the panel on success or a
+ * negative error code on failure.
+ */
+int drm_panel_get_modes(struct drm_panel *panel)
+{
+	if (panel && panel->funcs && panel->funcs->get_modes)
+		return panel->funcs->get_modes(panel);
+
+	return panel ? -ENOSYS : -EINVAL;
+}
+EXPORT_SYMBOL(drm_panel_get_modes);
+
 /**
  * drm_panel_add - add a panel to the global registry
  * @panel: panel to add
diff --git a/include/drm/drm_panel.h b/include/drm/drm_panel.h
index 26377836141c..053d611656b9 100644
--- a/include/drm/drm_panel.h
+++ b/include/drm/drm_panel.h
@@ -97,97 +97,6 @@ struct drm_panel {
 	struct list_head list;
 };
 
-/**
- * drm_disable_unprepare - power off a panel
- * @panel: DRM panel
- *
- * Calling this function will completely power off a panel (assert the panel's
- * reset, turn off power supplies, ...). After this function has completed, it
- * is usually no longer possible to communicate with the panel until another
- * call to drm_panel_prepare().
- *
- * Return: 0 on success or a negative error code on failure.
- */
-static inline int drm_panel_unprepare(struct drm_panel *panel)
-{
-	if (panel && panel->funcs && panel->funcs->unprepare)
-		return panel->funcs->unprepare(panel);
-
-	return panel ? -ENOSYS : -EINVAL;
-}
-
-/**
- * drm_panel_disable - disable a panel
- * @panel: DRM panel
- *
- * This will typically turn off the panel's backlight or disable the display
- * drivers. For smart panels it should still be possible to communicate with
- * the integrated circuitry via any command bus after this call.
- *
- * Return: 0 on success or a negative error code on failure.
- */
-static inline int drm_panel_disable(struct drm_panel *panel)
-{
-	if (panel && panel->funcs && panel->funcs->disable)
-		return panel->funcs->disable(panel);
-
-	return panel ? -ENOSYS : -EINVAL;
-}
-
-/**
- * drm_panel_prepare - power on a panel
- * @panel: DRM panel
- *
- * Calling this function will enable power and deassert any reset signals to
- * the panel. After this has completed it is possible to communicate with any
- * integrated circuitry via a command bus.
- *
- * Return: 0 on success or a negative error code on failure.
- */
-static inline int drm_panel_prepare(struct drm_panel *panel)
-{
-	if (panel && panel->funcs && panel->funcs->prepare)
-		return panel->funcs->prepare(panel);
-
-	return panel ? -ENOSYS : -EINVAL;
-}
-
-/**
- * drm_panel_enable - enable a panel
- * @panel: DRM panel
- *
- * Calling this function will cause the panel display drivers to be turned on
- * and the backlight to be enabled. Content will be visible on screen after
- * this call completes.
- *
- * Return: 0 on success or a negative error code on failure.
- */
-static inline int drm_panel_enable(struct drm_panel *panel)
-{
-	if (panel && panel->funcs && panel->funcs->enable)
-		return panel->funcs->enable(panel);
-
-	return panel ? -ENOSYS : -EINVAL;
-}
-
-/**
- * drm_panel_get_modes - probe the available display modes of a panel
- * @panel: DRM panel
- *
- * The modes probed from the panel are automatically added to the connector
- * that the panel is attached to.
- *
- * Return: The number of modes available from the panel on success or a
- * negative error code on failure.
- */
-static inline int drm_panel_get_modes(struct drm_panel *panel)
-{
-	if (panel && panel->funcs && panel->funcs->get_modes)
-		return panel->funcs->get_modes(panel);
-
-	return panel ? -ENOSYS : -EINVAL;
-}
-
 void drm_panel_init(struct drm_panel *panel);
 
 int drm_panel_add(struct drm_panel *panel);
@@ -196,6 +105,14 @@ void drm_panel_remove(struct drm_panel *panel);
 int drm_panel_attach(struct drm_panel *panel, struct drm_connector *connector);
 int drm_panel_detach(struct drm_panel *panel);
 
+int drm_panel_prepare(struct drm_panel *panel);
+int drm_panel_unprepare(struct drm_panel *panel);
+
+int drm_panel_enable(struct drm_panel *panel);
+int drm_panel_disable(struct drm_panel *panel);
+
+int drm_panel_get_modes(struct drm_panel *panel);
+
 #if defined(CONFIG_OF) && defined(CONFIG_DRM_PANEL)
 struct drm_panel *of_drm_find_panel(const struct device_node *np);
 #else
-- 
2.20.1