[PATCH v2 2/3] dt-bindings: display/bridge: Add binding for NWL mipi dsi host controller

Guido Günther agx at sigxcpu.org
Fri Aug 9 16:24:22 UTC 2019


The Northwest Logic MIPI DSI IP core can be found in NXPs i.MX8 SoCs.

Signed-off-by: Guido Günther <agx at sigxcpu.org>
---
 .../bindings/display/bridge/nwl-dsi.yaml      | 155 ++++++++++++++++++
 1 file changed, 155 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml

diff --git a/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml
new file mode 100644
index 000000000000..5ed8bc4a4d18
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml
@@ -0,0 +1,155 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/imx-nwl-dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Northwest Logic MIPI-DSI on imx SoCs
+
+maintainers:
+  - Guido Gúnther <agx at sigxcpu.org>
+  - Robert Chiras <robert.chiras at nxp.com>
+
+description: |
+  NWL MIPI-DSI host controller found on i.MX8 platforms. This is a dsi bridge for
+  the SOCs NWL MIPI-DSI host controller.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+        - const: fsl,imx8mq-nwl-dsi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: DSI core clock
+      - description: RX_ESC clock (used in escape mode)
+      - description: TX_ESC clock (used in escape mode)
+      - description: PHY_REF clock
+
+  clock-names:
+    items:
+      - const: core
+      - const: rx_esc
+      - const: tx_esc
+      - const: phy_ref
+
+  phys:
+    maxItems: 1
+    description:
+      A phandle to the phy module representing the DPHY
+
+  phy-names:
+    items:
+      - const: dphy
+
+  power-domains:
+    maxItems: 1
+    description:
+      A phandle to the power domain
+
+  resets:
+    maxItems: 4
+    description:
+      A phandle to the reset controller
+
+  reset-names:
+    items:
+      - const: byte
+      - const: dpi
+      - const: esc
+      - const: pclk
+
+  mux-sel:
+    maxItems: 1
+    description:
+      A phandle to the MUX register set
+
+  port:
+    type: object
+    description:
+      A input put or output port node.
+
+  ports:
+    type: object
+    description:
+      A node containing DSI input & output port nodes with endpoint
+      definitions as documented in
+      Documentation/devicetree/bindings/graph.txt.
+
+patternProperties:
+  "^panel@[0-9]+$": true
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8mq-nwl-dsi
+    then:
+      required:
+        - resets
+        - reset-names
+        - mux-sel
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - phys
+  - phy-names
+
+examples:
+ - |
+
+   mipi_dsi: mipi_dsi at 30a00000 {
+              #address-cells = <1>;
+              #size-cells = <0>;
+              compatible = "fsl,imx8mq-nwl-dsi";
+              reg = <0x30A00000 0x300>;
+              clocks = <&clk 163>, <&clk 244>, <&clk 245>, <&clk 164>;
+              clock-names = "core", "rx_esc", "tx_esc", "phy_ref";
+              interrupts = <0 34 4>;
+              power-domains = <&pgc_mipi>;
+              resets = <&src 0>, <&src 1>, <&src 2>, <&src 3>;
+              reset-names = "byte", "dpi", "esc", "pclk";
+              mux-sel = <&iomuxc_gpr>;
+              phys = <&dphy>;
+              phy-names = "dphy";
+
+              panel at 0 {
+                      compatible = "...";
+                      port at 0 {
+                           panel_in: endpoint {
+                                     remote-endpoint = <&mipi_dsi_out>;
+                           };
+                      };
+              };
+
+              ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    port at 0 {
+                           reg = <0>;
+                           mipi_dsi_in: endpoint {
+                                        remote-endpoint = <&lcdif_mipi_dsi>;
+                           };
+                    };
+                    port at 1 {
+                           reg = <1>;
+                           mipi_dsi_out: endpoint {
+                                         remote-endpoint = <&panel_in>;
+                           };
+                    };
+              };
+      };
-- 
2.20.1



More information about the dri-devel mailing list