[linux-sunxi] [PATCH v8 0/4] Add support for Orange Pi 3

[Maxime Ripard]

On Mon, Aug 12, 2019 at 03:54:03PM +0800, Chen-Yu Tsai wrote:
> On Mon, Aug 12, 2019 at 3:45 PM Jernej Škrabec <jernej.skrabec at gmail.com> wrote:
> >
> > Dne torek, 06. avgust 2019 ob 17:57:39 CEST je megous at megous.com napisal(a):
> > > From: Ondrej Jirman <megous at megous.com>
> > >
> > > This series implements support for Xunlong Orange Pi 3 board. There
> > > are only a few patches remaining.
> > >
> > > - ethernet support - just a DT change (patch 1)
> > > - HDMI support (patches 2-4)
> > >
> > > For some people, ethernet doesn't work after reboot because u-boot doesn't
> > > support AXP805 PMIC, and will not turn off the etherent PHY regulators.
> > > So the regulator controlled by gpio will be shut down, but the other one
> > > controlled by the AXP PMIC will not.
> > >
> > > This is a problem only when running with a builtin driver. This needs
> > > to be fixed in u-boot.
> > >
> > >
> > > Please take a look.
> >
> > Is there anything missing? It would be nice to get this in 5.4. There is a lot
> > of H6 boards which needs DDC bus enable mechanism (part of H6 reference
> > design), including Beelink GS1 which already has HDMI node in mainline kernel
> > DT, but due to disabled DDC lines works only with 1024x768 (fallback
> > resolution in DRM core).
>
> I have a few minor comments about patch 1.
>
> I think the HDMI bits are good, but I don't have maintainership / commit
> permissions for drm-misc, so I'll have to wait until someone applies patches
> 2 and 3 before I apply patch 4.

I've applied 2,3 and 4

Thanks!
Maxime

--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20190812/7e72dca1/attachment.sig>