[PATCH] drm/bridge: dw-hdmi: move cec PA invalidation to dw_hdmi_setup_rx_sense()
Neil Armstrong
narmstrong at baylibre.com
Tue Aug 13 11:56:24 UTC 2019
Hi Hans,
On 13/08/2019 13:43, Hans Verkuil wrote:
> On 8/13/19 11:32 AM, Hans Verkuil wrote:
>> When testing CEC on the AML-S905X-CC board I noticed that the CEC physical
>> address was not invalidated when the HDMI cable was unplugged. Some more
>> digging showed that meson uses meson_dw_hdmi.c to handle the HPD.
>>
>> Both dw_hdmi_irq() and dw_hdmi_top_thread_irq() (in meson_dw_hdmi.c) call
>> the dw_hdmi_setup_rx_sense() function. So move the code to invalidate the
>> CEC physical address to that function, so that it is independent of where
>> the HPD interrupt happens.
>>
>> Tested with both a AML-S905X-CC and a Khadas VIM2 board.
>>
>> Signed-off-by: Hans Verkuil <hverkuil-cisco at xs4all.nl>
>
> Please disregard this patch, Jonas Karlman will post a different series
> which will fix this in a different way.
Noted, thanks.
Neil
>
> Regards,
>
> Hans
>
>> ---
>> Note: an alternative would be to make a new dw-hdmi function such as
>> dw_hdmi_cec_phys_addr_invalidate() that is called from meson_dw_hdmi.c.
>> I decided not to do that since this patch is minimally invasive, but
>> that can obviously be changed if that approach is preferred.
>> ---
>> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
>> index c5a854af54f8..e899b31e1432 100644
>> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
>> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
>> @@ -2329,6 +2329,13 @@ void dw_hdmi_setup_rx_sense(struct dw_hdmi *hdmi, bool hpd, bool rx_sense)
>> dw_hdmi_update_power(hdmi);
>> dw_hdmi_update_phy_mask(hdmi);
>> }
>> + if (!hpd && !rx_sense) {
>> + struct cec_notifier *notifier = READ_ONCE(hdmi->cec_notifier);
>> +
>> + if (notifier)
>> + cec_notifier_phys_addr_invalidate(notifier);
>> + }
>> +
>> mutex_unlock(&hdmi->mutex);
>> }
>> EXPORT_SYMBOL_GPL(dw_hdmi_setup_rx_sense);
>> @@ -2369,14 +2376,6 @@ static irqreturn_t dw_hdmi_irq(int irq, void *dev_id)
>> dw_hdmi_setup_rx_sense(hdmi,
>> phy_stat & HDMI_PHY_HPD,
>> phy_stat & HDMI_PHY_RX_SENSE);
>> -
>> - if ((phy_stat & (HDMI_PHY_RX_SENSE | HDMI_PHY_HPD)) == 0) {
>> - struct cec_notifier *notifier;
>> -
>> - notifier = READ_ONCE(hdmi->cec_notifier);
>> - if (notifier)
>> - cec_notifier_phys_addr_invalidate(notifier);
>> - }
>> }
>>
>> if (intr_stat & HDMI_IH_PHY_STAT0_HPD) {
>>
>
More information about the dri-devel
mailing list