[PATCH v2 5/9] drm/panel: Add driver for the NEC NL8048HL11 panel
Laurent Pinchart
laurent.pinchart at ideasonboard.com
Tue Aug 13 13:17:43 UTC 2019
Hi Sam,
On Sun, Aug 11, 2019 at 07:10:05PM +0200, Sam Ravnborg wrote:
> On Sun, Aug 11, 2019 at 02:10:44AM +0300, Laurent Pinchart wrote:
> > This panel is used on the Zoom2/3/3630 SDP boards.
> >
> > The code is based on the omapdrm-specific panel-nec-nl8048hl11 driver
> >
> > Signed-off-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
> > ---
> > Changes since v1:
> >
> > - Mention boards using the panel in Kconfig
> > - Renamed nl8048_device to nl8048_panel
> > - Comments updates
> > - Store width_mm and height_mm in drm_display_mode
> > - Use drm_panel_disable() in .remove() handler
> > ---
> > drivers/gpu/drm/panel/Kconfig | 8 +
> > drivers/gpu/drm/panel/Makefile | 1 +
> > drivers/gpu/drm/panel/panel-nec-nl8048hl11.c | 247 +++++++++++++++++++
> > 3 files changed, 256 insertions(+)
> > create mode 100644 drivers/gpu/drm/panel/panel-nec-nl8048hl11.c
> >
> > diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
> > index 87cdc330672b..d28133c6aa0a 100644
> > --- a/drivers/gpu/drm/panel/Kconfig
> > +++ b/drivers/gpu/drm/panel/Kconfig
> > @@ -119,6 +119,14 @@ config DRM_PANEL_LG_LG4573
> > Say Y here if you want to enable support for LG4573 RGB panel.
> > To compile this driver as a module, choose M here.
> >
> > +config DRM_PANEL_NEC_NL8048HL11
> > + tristate "NEC NL8048HL11 RGB panel"
> > + depends on GPIOLIB && OF && SPI
> > + help
> > + Say Y here if you want to enable support for the NEC NL8048HL11 RGB
> > + panel (found on the Zoom2/3/3630 SDP boards). To compile this driver
> > + as a module, choose M here.
> > +
> > config DRM_PANEL_NOVATEK_NT39016
> > tristate "Novatek NT39016 RGB/SPI panel"
> > depends on OF && SPI
> > diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
> > index 9bc6f3c5bf96..8052f9a7ad60 100644
> > --- a/drivers/gpu/drm/panel/Makefile
> > +++ b/drivers/gpu/drm/panel/Makefile
> > @@ -10,6 +10,7 @@ obj-$(CONFIG_DRM_PANEL_JDI_LT070ME05000) += panel-jdi-lt070me05000.o
> > obj-$(CONFIG_DRM_PANEL_KINGDISPLAY_KD097D04) += panel-kingdisplay-kd097d04.o
> > obj-$(CONFIG_DRM_PANEL_LG_LB035Q02) += panel-lg-lb035q02.o
> > obj-$(CONFIG_DRM_PANEL_LG_LG4573) += panel-lg-lg4573.o
> > +obj-$(CONFIG_DRM_PANEL_NEC_NL8048HL11) += panel-nec-nl8048hl11.o
> > obj-$(CONFIG_DRM_PANEL_NOVATEK_NT39016) += panel-novatek-nt39016.o
> > obj-$(CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO) += panel-olimex-lcd-olinuxino.o
> > obj-$(CONFIG_DRM_PANEL_ORISETECH_OTM8009A) += panel-orisetech-otm8009a.o
> > diff --git a/drivers/gpu/drm/panel/panel-nec-nl8048hl11.c b/drivers/gpu/drm/panel/panel-nec-nl8048hl11.c
> > new file mode 100644
> > index 000000000000..7c1b77a0b024
> > --- /dev/null
> > +++ b/drivers/gpu/drm/panel/panel-nec-nl8048hl11.c
> > @@ -0,0 +1,247 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * NEC NL8048HL11 Panel Driver
> > + *
> > + * Copyright (C) 2019 Texas Instruments Incorporated
> > + *
> > + * Based on the omapdrm-specific panel-nec-nl8048hl11 driver
> > + *
> > + * Copyright (C) 2010 Texas Instruments Incorporated
> > + * Author: Erik Gilling <konkers at android.com>
> > + */
> > +
> > +#include <linux/delay.h>
> > +#include <linux/gpio/consumer.h>
> > +#include <linux/module.h>
> > +#include <linux/pm.h>
> > +#include <linux/spi/spi.h>
> > +
> > +#include <drm/drm_connector.h>
> > +#include <drm/drm_modes.h>
> > +#include <drm/drm_panel.h>
> > +
> > +struct nl8048_panel {
> > + struct drm_panel panel;
> > +
> > + struct spi_device *spi;
> > + struct gpio_desc *reset_gpio;
> > +};
> > +
> > +#define to_nl8048_device(p) container_of(p, struct nl8048_panel, panel)
> > +
> > +static int nl8048_write(struct nl8048_panel *lcd, unsigned char addr,
> > + unsigned char value)
> > +{
> > + u8 data[4] = { value, 0x01, addr, 0x00 };
> > + int ret;
> > +
> > + ret = spi_write(lcd->spi, data, sizeof(data));
> > + if (ret)
> > + dev_err(&lcd->spi->dev, "SPI write to %u failed: %d\n",
> > + addr, ret);
> > +
> > + return ret;
> > +}
> > +
> > +static int nl8048_init(struct nl8048_panel *lcd)
> > +{
> > + static const struct {
> > + unsigned char addr;
> > + unsigned char data;
> > + } nl8048_init_seq[] = {
> > + { 3, 0x01 }, { 0, 0x00 }, { 1, 0x01 }, { 4, 0x00 },
> > + { 5, 0x14 }, { 6, 0x24 }, { 16, 0xd7 }, { 17, 0x00 },
> > + { 18, 0x00 }, { 19, 0x55 }, { 20, 0x01 }, { 21, 0x70 },
> > + { 22, 0x1e }, { 23, 0x25 }, { 24, 0x25 }, { 25, 0x02 },
> > + { 26, 0x02 }, { 27, 0xa0 }, { 32, 0x2f }, { 33, 0x0f },
> > + { 34, 0x0f }, { 35, 0x0f }, { 36, 0x0f }, { 37, 0x0f },
> > + { 38, 0x0f }, { 39, 0x00 }, { 40, 0x02 }, { 41, 0x02 },
> > + { 42, 0x02 }, { 43, 0x0f }, { 44, 0x0f }, { 45, 0x0f },
> > + { 46, 0x0f }, { 47, 0x0f }, { 48, 0x0f }, { 49, 0x0f },
> > + { 50, 0x00 }, { 51, 0x02 }, { 52, 0x02 }, { 53, 0x02 },
> > + { 80, 0x0c }, { 83, 0x42 }, { 84, 0x42 }, { 85, 0x41 },
> > + { 86, 0x14 }, { 89, 0x88 }, { 90, 0x01 }, { 91, 0x00 },
> > + { 92, 0x02 }, { 93, 0x0c }, { 94, 0x1c }, { 95, 0x27 },
> > + { 98, 0x49 }, { 99, 0x27 }, { 102, 0x76 }, { 103, 0x27 },
> > + { 112, 0x01 }, { 113, 0x0e }, { 114, 0x02 }, { 115, 0x0c },
> > + { 118, 0x0c }, { 121, 0x30 }, { 130, 0x00 }, { 131, 0x00 },
> > + { 132, 0xfc }, { 134, 0x00 }, { 136, 0x00 }, { 138, 0x00 },
> > + { 139, 0x00 }, { 140, 0x00 }, { 141, 0xfc }, { 143, 0x00 },
> > + { 145, 0x00 }, { 147, 0x00 }, { 148, 0x00 }, { 149, 0x00 },
> > + { 150, 0xfc }, { 152, 0x00 }, { 154, 0x00 }, { 156, 0x00 },
> > + { 157, 0x00 },
> > + };
> > +
> > + unsigned int i;
> > + int ret;
> > +
> > + for (i = 0; i < ARRAY_SIZE(nl8048_init_seq); ++i) {
> > + ret = nl8048_write(lcd, nl8048_init_seq[i].addr,
> > + nl8048_init_seq[i].data);
> > + if (ret < 0)
> > + return ret;
> > + }
> > +
> > + udelay(20);
> > +
> > + return nl8048_write(lcd, 2, 0x00);
> > +}
> > +
> > +static int nl8048_disable(struct drm_panel *panel)
> > +{
> > + struct nl8048_panel *lcd = to_nl8048_device(panel);
> > +
> > + gpiod_set_value_cansleep(lcd->reset_gpio, 0);
> > +
> > + return 0;
> > +}
> > +
> > +static int nl8048_enable(struct drm_panel *panel)
> > +{
> > + struct nl8048_panel *lcd = to_nl8048_device(panel);
> > +
> > + gpiod_set_value_cansleep(lcd->reset_gpio, 1);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct drm_display_mode nl8048_mode = {
> > + /* NEC PIX Clock Ratings MIN:21.8MHz TYP:23.8MHz MAX:25.7MHz */
> > + .clock = 23800,
> > + .hdisplay = 800,
> > + .hsync_start = 800 + 6,
> > + .hsync_end = 800 + 6 + 1,
> > + .htotal = 800 + 6 + 1 + 4,
> > + .vdisplay = 480,
> > + .vsync_start = 480 + 3,
> > + .vsync_end = 480 + 3 + 1,
> > + .vtotal = 480 + 3 + 1 + 4,
> > + .vrefresh = 60,
> > + .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
> > + .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
> > + .width_mm = 89,
> > + .height_mm = 53,
> > +};
> > +
> > +static int nl8048_get_modes(struct drm_panel *panel)
> > +{
> > + struct drm_connector *connector = panel->connector;
> > + struct drm_display_mode *mode;
> > +
> > + mode = drm_mode_duplicate(panel->drm, &nl8048_mode);
> > + if (!mode)
> > + return -ENOMEM;
> > +
> > + drm_mode_set_name(mode);
> > + drm_mode_probed_add(connector, mode);
> > +
> > + connector->display_info.width_mm = nl8048_mode.width_mm;
> > + connector->display_info.height_mm = nl8048_mode.height_mm;
> > + connector->display_info.bus_flags = DRM_BUS_FLAG_DE_HIGH
> > + | DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE
> > + | DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE;
> > +
> > + return 1;
> > +}
> > +
> > +static const struct drm_panel_funcs nl8048_funcs = {
> > + .disable = nl8048_disable,
> > + .enable = nl8048_enable,
> > + .get_modes = nl8048_get_modes,
> > +};
> > +
> > +static int __maybe_unused nl8048_suspend(struct device *dev)
> > +{
> > + struct nl8048_panel *lcd = dev_get_drvdata(dev);
> > +
> > + nl8048_write(lcd, 2, 0x01);
> > + msleep(40);
> > +
> > + return 0;
> > +}
> > +
> > +static int __maybe_unused nl8048_resume(struct device *dev)
> > +{
> > + struct nl8048_panel *lcd = dev_get_drvdata(dev);
> > +
> > + /* Reinitialize the panel. */
> > + spi_setup(lcd->spi);
> > + nl8048_write(lcd, 2, 0x00);
> > + nl8048_init(lcd);
> > +
> > + return 0;
> > +}
> > +
> > +static SIMPLE_DEV_PM_OPS(nl8048_pm_ops, nl8048_suspend, nl8048_resume);
> > +
> > +static int nl8048_probe(struct spi_device *spi)
> > +{
> > + struct nl8048_panel *lcd;
> > + int ret;
> > +
> > + lcd = devm_kzalloc(&spi->dev, sizeof(*lcd), GFP_KERNEL);
> > + if (lcd == NULL)
> > + return -ENOMEM;
> > +
> > + spi_set_drvdata(spi, lcd);
> > + lcd->spi = spi;
> > +
> > + lcd->reset_gpio = devm_gpiod_get(&spi->dev, "reset", GPIOD_OUT_LOW);
> > + if (IS_ERR(lcd->reset_gpio)) {
> > + dev_err(&spi->dev, "failed to parse reset gpio\n");
> > + return PTR_ERR(lcd->reset_gpio);
> > + }
> > +
> > + spi->mode = SPI_MODE_0;
> > + spi->bits_per_word = 32;
> > +
> > + ret = spi_setup(spi);
> > + if (ret < 0) {
> > + dev_err(&spi->dev, "failed to setup SPI: %d\n", ret);
> > + return ret;
> > + }
> > +
> > + ret = nl8048_init(lcd);
> > + if (ret < 0)
> > + return ret;
> > +
> > + drm_panel_init(&lcd->panel);
> > + lcd->panel.dev = &lcd->spi->dev;
> > + lcd->panel.funcs = &nl8048_funcs;
> > +
> > + return drm_panel_add(&lcd->panel);
> > +}
> > +
> > +static int nl8048_remove(struct spi_device *spi)
> > +{
> > + struct nl8048_panel *lcd = spi_get_drvdata(spi);
> > +
> > + drm_panel_remove(&lcd->panel);
> > + drm_panel_disable(&lcd->panel);
>
> We are missing a drm_panel_unprepare() here.
> This is required by the core - but not by this driver.
> (At least with the patch I have in the works).
>
> Then again:
>
> $ git grep -C 3 drm_panel_remove
>
> tell a story that many users of drm_panel_remove do MOT
> call drm_panel_disable() / drm_panel_unprepare() after
> drm_panel_remove()
>
> Maybe we should just add it to the core so disable/unprepare
> is done by the core when a panel is removed?
I think that's a good idea. I'll submit a v3 with drm_panel_unprepare()
added, and moving that to the core could then be done through a
tree-wide conversion.
> > +
> > + return 0;
> > +}
> > +
> > +static const struct of_device_id nl8048_of_match[] = {
> > + { .compatible = "nec,nl8048hl11", },
> > + { /* sentinel */ },
> > +};
> > +
> > +MODULE_DEVICE_TABLE(of, nl8048_of_match);
> > +
> > +static struct spi_driver nl8048_driver = {
> > + .probe = nl8048_probe,
> > + .remove = nl8048_remove,
> > + .driver = {
> > + .name = "panel-nec-nl8048hl11",
> > + .pm = &nl8048_pm_ops,
> > + .of_match_table = nl8048_of_match,
> > + },
> > +};
> > +
> > +module_spi_driver(nl8048_driver);
> > +
> > +MODULE_ALIAS("spi:nec,nl8048hl11");
> > +MODULE_AUTHOR("Erik Gilling <konkers at android.com>");
> > +MODULE_DESCRIPTION("NEC-NL8048HL11 Driver");
> > +MODULE_LICENSE("GPL");
--
Regards,
Laurent Pinchart
More information about the dri-devel
mailing list