[PATCH v3 8/9] drm/panel: Add driver for the Toppoly TD028TTEC1 panel
Sam Ravnborg
sam at ravnborg.org
Tue Aug 13 17:18:52 UTC 2019
Hi Laurent.
On Tue, Aug 13, 2019 at 04:33:10PM +0300, Laurent Pinchart wrote:
> This panel is used on the OpenMoko Neo FreeRunner and Neo 1973.
>
> The code is based on the omapdrm-specific panel-tpo-td028ttec1 driver.
>
> Signed-off-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
This driver have everything in the enable/disable pair.
The driver should use prepare/unprepare for the things that belongs
there.
With that fixed:
Reviewed-by: Sam Ravnborg <sam at ravnborg.org>
> ---
> Changes since v2:
>
> - Call drm_panel_unprepare() in .remove() handler
>
> Changes since v1:
>
> - Mention boards using the panel in Kconfig
> - Renamed td028ttec1_device to td028ttec1_panel
> - Comments updates
> - Removed unneeded ret check
> - Store width_mm and height_mm in drm_display_mode
> - Use drm_panel_disable() in .remove() handler
> ---
> drivers/gpu/drm/panel/Kconfig | 8 +
> drivers/gpu/drm/panel/Makefile | 1 +
> drivers/gpu/drm/panel/panel-tpo-td028ttec1.c | 382 +++++++++++++++++++
> 3 files changed, 391 insertions(+)
> create mode 100644 drivers/gpu/drm/panel/panel-tpo-td028ttec1.c
>
> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
> index b05649b3118a..c2689420d2dd 100644
> --- a/drivers/gpu/drm/panel/Kconfig
> +++ b/drivers/gpu/drm/panel/Kconfig
> @@ -324,6 +324,14 @@ config DRM_PANEL_SONY_ACX565AKM
> Say Y here if you want to enable support for the Sony ACX565AKM
> 800x600 3.5" panel (found on the Nokia N900).
>
> +config DRM_PANEL_TPO_TD028TTEC1
> + tristate "Toppoly (TPO) TD028TTEC1 panel driver"
> + depends on OF && SPI
> + depends on BACKLIGHT_CLASS_DEVICE
> + help
> + Say Y here if you want to enable support for TPO TD028TTEC1 480x640
> + 2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973).
> +
> config DRM_PANEL_TPO_TPG110
> tristate "TPO TPG 800x400 panel"
> depends on OF && SPI && GPIOLIB
> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
> index 28cf2332fd06..27b776737ad3 100644
> --- a/drivers/gpu/drm/panel/Makefile
> +++ b/drivers/gpu/drm/panel/Makefile
> @@ -34,5 +34,6 @@ obj-$(CONFIG_DRM_PANEL_SHARP_LS043T1LE01) += panel-sharp-ls043t1le01.o
> obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7701) += panel-sitronix-st7701.o
> obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7789V) += panel-sitronix-st7789v.o
> obj-$(CONFIG_DRM_PANEL_SONY_ACX565AKM) += panel-sony-acx565akm.o
> +obj-$(CONFIG_DRM_PANEL_TPO_TD028TTEC1) += panel-tpo-td028ttec1.o
> obj-$(CONFIG_DRM_PANEL_TPO_TPG110) += panel-tpo-tpg110.o
> obj-$(CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA) += panel-truly-nt35597.o
> diff --git a/drivers/gpu/drm/panel/panel-tpo-td028ttec1.c b/drivers/gpu/drm/panel/panel-tpo-td028ttec1.c
> new file mode 100644
> index 000000000000..dd69fac9808f
> --- /dev/null
> +++ b/drivers/gpu/drm/panel/panel-tpo-td028ttec1.c
> @@ -0,0 +1,382 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Toppoly TD028TTEC1 Panel Driver
> + *
> + * Copyright (C) 2019 Texas Instruments Incorporated
> + *
> + * Based on the omapdrm-specific panel-tpo-td028ttec1 driver
> + *
> + * Copyright (C) 2008 Nokia Corporation
> + * Author: Tomi Valkeinen <tomi.valkeinen at ti.com>
> + *
> + * Neo 1973 code (jbt6k74.c):
> + * Copyright (C) 2006-2007 OpenMoko, Inc.
> + * Author: Harald Welte <laforge at openmoko.org>
> + *
> + * Ported and adapted from Neo 1973 U-Boot by:
> + * H. Nikolaus Schaller <hns at goldelico.com>
> + */
> +
> +#include <linux/backlight.h>
> +#include <linux/delay.h>
> +#include <linux/module.h>
> +#include <linux/spi/spi.h>
> +
> +#include <drm/drm_connector.h>
> +#include <drm/drm_modes.h>
> +#include <drm/drm_panel.h>
> +
> +#define JBT_COMMAND 0x000
> +#define JBT_DATA 0x100
> +
> +#define JBT_REG_SLEEP_IN 0x10
> +#define JBT_REG_SLEEP_OUT 0x11
> +
> +#define JBT_REG_DISPLAY_OFF 0x28
> +#define JBT_REG_DISPLAY_ON 0x29
> +
> +#define JBT_REG_RGB_FORMAT 0x3a
> +#define JBT_REG_QUAD_RATE 0x3b
> +
> +#define JBT_REG_POWER_ON_OFF 0xb0
> +#define JBT_REG_BOOSTER_OP 0xb1
> +#define JBT_REG_BOOSTER_MODE 0xb2
> +#define JBT_REG_BOOSTER_FREQ 0xb3
> +#define JBT_REG_OPAMP_SYSCLK 0xb4
> +#define JBT_REG_VSC_VOLTAGE 0xb5
> +#define JBT_REG_VCOM_VOLTAGE 0xb6
> +#define JBT_REG_EXT_DISPL 0xb7
> +#define JBT_REG_OUTPUT_CONTROL 0xb8
> +#define JBT_REG_DCCLK_DCEV 0xb9
> +#define JBT_REG_DISPLAY_MODE1 0xba
> +#define JBT_REG_DISPLAY_MODE2 0xbb
> +#define JBT_REG_DISPLAY_MODE 0xbc
> +#define JBT_REG_ASW_SLEW 0xbd
> +#define JBT_REG_DUMMY_DISPLAY 0xbe
> +#define JBT_REG_DRIVE_SYSTEM 0xbf
> +
> +#define JBT_REG_SLEEP_OUT_FR_A 0xc0
> +#define JBT_REG_SLEEP_OUT_FR_B 0xc1
> +#define JBT_REG_SLEEP_OUT_FR_C 0xc2
> +#define JBT_REG_SLEEP_IN_LCCNT_D 0xc3
> +#define JBT_REG_SLEEP_IN_LCCNT_E 0xc4
> +#define JBT_REG_SLEEP_IN_LCCNT_F 0xc5
> +#define JBT_REG_SLEEP_IN_LCCNT_G 0xc6
> +
> +#define JBT_REG_GAMMA1_FINE_1 0xc7
> +#define JBT_REG_GAMMA1_FINE_2 0xc8
> +#define JBT_REG_GAMMA1_INCLINATION 0xc9
> +#define JBT_REG_GAMMA1_BLUE_OFFSET 0xca
> +
> +#define JBT_REG_BLANK_CONTROL 0xcf
> +#define JBT_REG_BLANK_TH_TV 0xd0
> +#define JBT_REG_CKV_ON_OFF 0xd1
> +#define JBT_REG_CKV_1_2 0xd2
> +#define JBT_REG_OEV_TIMING 0xd3
> +#define JBT_REG_ASW_TIMING_1 0xd4
> +#define JBT_REG_ASW_TIMING_2 0xd5
> +
> +#define JBT_REG_HCLOCK_VGA 0xec
> +#define JBT_REG_HCLOCK_QVGA 0xed
> +
> +struct td028ttec1_panel {
> + struct drm_panel panel;
> +
> + struct spi_device *spi;
> + struct backlight_device *backlight;
> +};
> +
> +#define to_td028ttec1_device(p) container_of(p, struct td028ttec1_panel, panel)
> +
> +static int jbt_ret_write_0(struct td028ttec1_panel *lcd, u8 reg, int *err)
> +{
> + struct spi_device *spi = lcd->spi;
> + u16 tx_buf = JBT_COMMAND | reg;
> + int ret;
> +
> + if (err && *err)
> + return *err;
> +
> + ret = spi_write(spi, (u8 *)&tx_buf, sizeof(tx_buf));
> + if (ret < 0) {
> + dev_err(&spi->dev, "%s: SPI write failed: %d\n", __func__, ret);
> + if (err)
> + *err = ret;
> + }
> +
> + return ret;
> +}
> +
> +static int jbt_reg_write_1(struct td028ttec1_panel *lcd,
> + u8 reg, u8 data, int *err)
> +{
> + struct spi_device *spi = lcd->spi;
> + u16 tx_buf[2];
> + int ret;
> +
> + if (err && *err)
> + return *err;
> +
> + tx_buf[0] = JBT_COMMAND | reg;
> + tx_buf[1] = JBT_DATA | data;
> +
> + ret = spi_write(spi, (u8 *)tx_buf, sizeof(tx_buf));
> + if (ret < 0) {
> + dev_err(&spi->dev, "%s: SPI write failed: %d\n", __func__, ret);
> + if (err)
> + *err = ret;
> + }
> +
> + return ret;
> +}
> +
> +static int jbt_reg_write_2(struct td028ttec1_panel *lcd,
> + u8 reg, u16 data, int *err)
> +{
> + struct spi_device *spi = lcd->spi;
> + u16 tx_buf[3];
> + int ret;
> +
> + if (err && *err)
> + return *err;
> +
> + tx_buf[0] = JBT_COMMAND | reg;
> + tx_buf[1] = JBT_DATA | (data >> 8);
> + tx_buf[2] = JBT_DATA | (data & 0xff);
> +
> + ret = spi_write(spi, (u8 *)tx_buf, sizeof(tx_buf));
> + if (ret < 0) {
> + dev_err(&spi->dev, "%s: SPI write failed: %d\n", __func__, ret);
> + if (err)
> + *err = ret;
> + }
> +
> + return ret;
> +}
> +
> +static int td028ttec1_disable(struct drm_panel *panel)
> +{
> + struct td028ttec1_panel *lcd = to_td028ttec1_device(panel);
> +
> + backlight_disable(lcd->backlight);
> +
> + jbt_ret_write_0(lcd, JBT_REG_DISPLAY_OFF, NULL);
> + jbt_reg_write_2(lcd, JBT_REG_OUTPUT_CONTROL, 0x8002, NULL);
> + jbt_ret_write_0(lcd, JBT_REG_SLEEP_IN, NULL);
> + jbt_reg_write_1(lcd, JBT_REG_POWER_ON_OFF, 0x00, NULL);
> +
> + return 0;
> +}
> +
> +static int td028ttec1_enable(struct drm_panel *panel)
> +{
> + struct td028ttec1_panel *lcd = to_td028ttec1_device(panel);
> + unsigned int i;
> + int ret = 0;
> +
> + /* Three times command zero */
> + for (i = 0; i < 3; ++i) {
> + jbt_ret_write_0(lcd, 0x00, &ret);
> + usleep_range(1000, 2000);
> + }
> +
> + /* deep standby out */
> + jbt_reg_write_1(lcd, JBT_REG_POWER_ON_OFF, 0x17, &ret);
> +
> + /* RGB I/F on, RAM write off, QVGA through, SIGCON enable */
> + jbt_reg_write_1(lcd, JBT_REG_DISPLAY_MODE, 0x80, &ret);
> +
> + /* Quad mode off */
> + jbt_reg_write_1(lcd, JBT_REG_QUAD_RATE, 0x00, &ret);
> +
> + /* AVDD on, XVDD on */
> + jbt_reg_write_1(lcd, JBT_REG_POWER_ON_OFF, 0x16, &ret);
> +
> + /* Output control */
> + jbt_reg_write_2(lcd, JBT_REG_OUTPUT_CONTROL, 0xfff9, &ret);
> +
> + /* Sleep mode off */
> + jbt_ret_write_0(lcd, JBT_REG_SLEEP_OUT, &ret);
> +
> + /* at this point we have like 50% grey */
> +
> + /* initialize register set */
> + jbt_reg_write_1(lcd, JBT_REG_DISPLAY_MODE1, 0x01, &ret);
> + jbt_reg_write_1(lcd, JBT_REG_DISPLAY_MODE2, 0x00, &ret);
> + jbt_reg_write_1(lcd, JBT_REG_RGB_FORMAT, 0x60, &ret);
> + jbt_reg_write_1(lcd, JBT_REG_DRIVE_SYSTEM, 0x10, &ret);
> + jbt_reg_write_1(lcd, JBT_REG_BOOSTER_OP, 0x56, &ret);
> + jbt_reg_write_1(lcd, JBT_REG_BOOSTER_MODE, 0x33, &ret);
> + jbt_reg_write_1(lcd, JBT_REG_BOOSTER_FREQ, 0x11, &ret);
> + jbt_reg_write_1(lcd, JBT_REG_BOOSTER_FREQ, 0x11, &ret);
> + jbt_reg_write_1(lcd, JBT_REG_OPAMP_SYSCLK, 0x02, &ret);
> + jbt_reg_write_1(lcd, JBT_REG_VSC_VOLTAGE, 0x2b, &ret);
> + jbt_reg_write_1(lcd, JBT_REG_VCOM_VOLTAGE, 0x40, &ret);
> + jbt_reg_write_1(lcd, JBT_REG_EXT_DISPL, 0x03, &ret);
> + jbt_reg_write_1(lcd, JBT_REG_DCCLK_DCEV, 0x04, &ret);
> + /*
> + * default of 0x02 in JBT_REG_ASW_SLEW responsible for 72Hz requirement
> + * to avoid red / blue flicker
> + */
> + jbt_reg_write_1(lcd, JBT_REG_ASW_SLEW, 0x04, &ret);
> + jbt_reg_write_1(lcd, JBT_REG_DUMMY_DISPLAY, 0x00, &ret);
> +
> + jbt_reg_write_1(lcd, JBT_REG_SLEEP_OUT_FR_A, 0x11, &ret);
> + jbt_reg_write_1(lcd, JBT_REG_SLEEP_OUT_FR_B, 0x11, &ret);
> + jbt_reg_write_1(lcd, JBT_REG_SLEEP_OUT_FR_C, 0x11, &ret);
> + jbt_reg_write_2(lcd, JBT_REG_SLEEP_IN_LCCNT_D, 0x2040, &ret);
> + jbt_reg_write_2(lcd, JBT_REG_SLEEP_IN_LCCNT_E, 0x60c0, &ret);
> + jbt_reg_write_2(lcd, JBT_REG_SLEEP_IN_LCCNT_F, 0x1020, &ret);
> + jbt_reg_write_2(lcd, JBT_REG_SLEEP_IN_LCCNT_G, 0x60c0, &ret);
> +
> + jbt_reg_write_2(lcd, JBT_REG_GAMMA1_FINE_1, 0x5533, &ret);
> + jbt_reg_write_1(lcd, JBT_REG_GAMMA1_FINE_2, 0x00, &ret);
> + jbt_reg_write_1(lcd, JBT_REG_GAMMA1_INCLINATION, 0x00, &ret);
> + jbt_reg_write_1(lcd, JBT_REG_GAMMA1_BLUE_OFFSET, 0x00, &ret);
> +
> + jbt_reg_write_2(lcd, JBT_REG_HCLOCK_VGA, 0x1f0, &ret);
> + jbt_reg_write_1(lcd, JBT_REG_BLANK_CONTROL, 0x02, &ret);
> + jbt_reg_write_2(lcd, JBT_REG_BLANK_TH_TV, 0x0804, &ret);
> +
> + jbt_reg_write_1(lcd, JBT_REG_CKV_ON_OFF, 0x01, &ret);
> + jbt_reg_write_2(lcd, JBT_REG_CKV_1_2, 0x0000, &ret);
> +
> + jbt_reg_write_2(lcd, JBT_REG_OEV_TIMING, 0x0d0e, &ret);
> + jbt_reg_write_2(lcd, JBT_REG_ASW_TIMING_1, 0x11a4, &ret);
> + jbt_reg_write_1(lcd, JBT_REG_ASW_TIMING_2, 0x0e, &ret);
> +
> + jbt_ret_write_0(lcd, JBT_REG_DISPLAY_ON, &ret);
> +
> + if (ret)
> + return ret;
> +
> + backlight_enable(lcd->backlight);
> +
> + return 0;
> +}
> +
> +static const struct drm_display_mode td028ttec1_mode = {
> + .clock = 22153,
> + .hdisplay = 480,
> + .hsync_start = 480 + 24,
> + .hsync_end = 480 + 24 + 8,
> + .htotal = 480 + 24 + 8 + 8,
> + .vdisplay = 640,
> + .vsync_start = 640 + 4,
> + .vsync_end = 640 + 4 + 2,
> + .vtotal = 640 + 4 + 2 + 2,
> + .vrefresh = 66,
> + .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
> + .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
> + .width_mm = 43,
> + .height_mm = 58,
> +};
> +
> +static int td028ttec1_get_modes(struct drm_panel *panel)
> +{
> + struct drm_connector *connector = panel->connector;
> + struct drm_display_mode *mode;
> +
> + mode = drm_mode_duplicate(panel->drm, &td028ttec1_mode);
> + if (!mode)
> + return -ENOMEM;
> +
> + drm_mode_set_name(mode);
> + drm_mode_probed_add(connector, mode);
> +
> + connector->display_info.width_mm = td028ttec1_mode.width_mm;
> + connector->display_info.height_mm = td028ttec1_mode.height_mm;
> + /*
> + * FIXME: According to the datasheet sync signals are sampled on the
> + * rising edge of the clock, but the code running on the OpenMoko Neo
> + * FreeRunner and Neo 1973 indicates sampling on the falling edge. This
> + * should be tested on a real device.
> + */
> + connector->display_info.bus_flags = DRM_BUS_FLAG_DE_HIGH
> + | DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE
> + | DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE;
> +
> + return 1;
> +}
> +
> +static const struct drm_panel_funcs td028ttec1_funcs = {
> + .disable = td028ttec1_disable,
> + .enable = td028ttec1_enable,
> + .get_modes = td028ttec1_get_modes,
> +};
> +
> +static int td028ttec1_probe(struct spi_device *spi)
> +{
> + struct td028ttec1_panel *lcd;
> + int ret;
> +
> + lcd = devm_kzalloc(&spi->dev, sizeof(*lcd), GFP_KERNEL);
> + if (lcd == NULL)
> + return -ENOMEM;
> +
> + spi_set_drvdata(spi, lcd);
> + lcd->spi = spi;
> +
> + lcd->backlight = devm_of_find_backlight(&spi->dev);
> + if (IS_ERR(lcd->backlight))
> + return PTR_ERR(lcd->backlight);
> +
> + spi->mode = SPI_MODE_3;
> + spi->bits_per_word = 9;
> +
> + ret = spi_setup(spi);
> + if (ret < 0) {
> + dev_err(&spi->dev, "failed to setup SPI: %d\n", ret);
> + return ret;
> + }
> +
> + drm_panel_init(&lcd->panel);
> + lcd->panel.dev = &lcd->spi->dev;
> + lcd->panel.funcs = &td028ttec1_funcs;
> +
> + return drm_panel_add(&lcd->panel);
> +}
> +
> +static int td028ttec1_remove(struct spi_device *spi)
> +{
> + struct td028ttec1_panel *lcd = spi_get_drvdata(spi);
> +
> + drm_panel_remove(&lcd->panel);
> + drm_panel_disable(&lcd->panel);
> + drm_panel_unprepare(&lcd->panel);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id td028ttec1_of_match[] = {
> + { .compatible = "tpo,td028ttec1", },
> + /* DT backward compatibility. */
> + { .compatible = "toppoly,td028ttec1", },
> + { /* sentinel */ },
> +};
> +
> +MODULE_DEVICE_TABLE(of, td028ttec1_of_match);
> +
> +static const struct spi_device_id td028ttec1_ids[] = {
> + { "tpo,td028ttec1", 0},
> + { "toppoly,td028ttec1", 0 },
> + { /* sentinel */ }
> +};
> +
> +MODULE_DEVICE_TABLE(spi, td028ttec1_ids);
> +
> +static struct spi_driver td028ttec1_driver = {
> + .probe = td028ttec1_probe,
> + .remove = td028ttec1_remove,
> + .id_table = td028ttec1_ids,
> + .driver = {
> + .name = "panel-tpo-td028ttec1",
> + .of_match_table = td028ttec1_of_match,
> + },
> +};
> +
> +module_spi_driver(td028ttec1_driver);
> +
> +MODULE_AUTHOR("H. Nikolaus Schaller <hns at goldelico.com>");
> +MODULE_DESCRIPTION("Toppoly TD028TTEC1 panel driver");
> +MODULE_LICENSE("GPL");
> --
> Regards,
>
> Laurent Pinchart
More information about the dri-devel
mailing list