[PATCH 2/7] gpu: ipu-v3: image-convert: move output seam valid interval calculation into find_best_seam

[Philipp Zabel]

This reduces code duplication and allows to easily calculate the valid
interval for the input seam position in the same place.

Signed-off-by: Philipp Zabel <p.zabel at pengutronix.de>
---
 drivers/gpu/ipu-v3/ipu-image-convert.c | 30 +++++++++++---------------
 1 file changed, 12 insertions(+), 18 deletions(-)

diff --git a/drivers/gpu/ipu-v3/ipu-image-convert.c b/drivers/gpu/ipu-v3/ipu-image-convert.c
index c9909f1c9ffb..4ac7377cfe5c 100644
--- a/drivers/gpu/ipu-v3/ipu-image-convert.c
+++ b/drivers/gpu/ipu-v3/ipu-image-convert.c
@@ -442,12 +442,10 @@ static int calc_image_resize_coefficients(struct ipu_image_convert_ctx *ctx,
 #define round_closest(x, y) round_down((x) + (y)/2, (y))
 
 /*
- * Find the best aligned seam position in the inverval [out_start, out_end].
+ * Find the best aligned seam position for the given column / row index.
  * Rotation and image offsets are out of scope.
  *
- * @out_start: start of inverval, must be within 1024 pixels / lines
- *             of out_end
- * @out_end: end of interval, smaller than or equal to out_edge
+ * @index: column / row index, used to calculate valid interval
  * @in_edge: input right / bottom edge
  * @out_edge: output right / bottom edge
  * @in_align: input alignment, either horizontal 8-byte line start address
@@ -463,8 +461,7 @@ static int calc_image_resize_coefficients(struct ipu_image_convert_ctx *ctx,
  * @_out_seam: aligned output seam position return value
  */
 static void find_best_seam(struct ipu_image_convert_ctx *ctx,
-			   unsigned int out_start,
-			   unsigned int out_end,
+			   unsigned int index,
 			   unsigned int in_edge,
 			   unsigned int out_edge,
 			   unsigned int in_align,
@@ -482,6 +479,13 @@ static void find_best_seam(struct ipu_image_convert_ctx *ctx,
 	unsigned int out_seam = 0;
 	unsigned int in_seam = 0;
 	unsigned int min_diff = UINT_MAX;
+	unsigned int out_start;
+	unsigned int out_end;
+
+	/* Start within 1024 pixels of the right / bottom edge */
+	out_start = max_t(int, index * out_align, out_edge - 1024);
+	/* End before having to add more columns to the left / rows above */
+	out_end = min_t(unsigned int, out_edge, index * 1024 + 1);
 
 	/*
 	 * Output tiles must start at a multiple of 8 bytes horizontally and
@@ -722,12 +726,7 @@ static void find_seams(struct ipu_image_convert_ctx *ctx,
 		 * horizontally.
 		 */
 
-		/* Start within 1024 pixels of the right edge */
-		out_start = max_t(int, col * out_left_align, out_right - 1024);
-		/* End before having to add more columns to the left */
-		out_end = min_t(unsigned int, out_right, col * 1024 + 1);
-
-		find_best_seam(ctx, out_start, out_end,
+		find_best_seam(ctx, col,
 			       in_right, out_right,
 			       in_left_align, out_left_align,
 			       allow_in_overshoot ? 1 : 8 /* burst length */,
@@ -767,12 +766,7 @@ static void find_seams(struct ipu_image_convert_ctx *ctx,
 		unsigned int in_top;
 		unsigned int out_top;
 
-		/* Start within 1024 lines of the bottom edge */
-		out_start = max_t(int, row * out_top_align, out_bottom - 1024);
-		/* End before having to add more rows above */
-		out_end = min_t(unsigned int, out_bottom, row * 1024 + 1);
-
-		find_best_seam(ctx, out_start, out_end,
+		find_best_seam(ctx, row,
 			       in_bottom, out_bottom,
 			       in_top_align, out_top_align,
 			       1, allow_overshoot ? 1 : out_height_align,
-- 
2.20.1