[PATCH 09/60] drm/bridge: Add connector-related bridge operations and data
Laurent Pinchart
laurent.pinchart at ideasonboard.com
Wed Aug 14 12:56:36 UTC 2019
Hi Daniel,
On Wed, Aug 14, 2019 at 02:43:21PM +0200, Daniel Vetter wrote:
> On Thu, Aug 08, 2019 at 09:19:48PM +0300, Laurent Pinchart wrote:
> > On Thu, Jul 11, 2019 at 09:35:48AM +0200, Daniel Vetter wrote:
> >> On Wed, Jul 10, 2019 at 02:12:14PM +0200, Andrzej Hajda wrote:
> >>> Hi Laurent,
> >>>
> >>> I like the approach, current practice when almost every bridge should
> >>> optionally implement connector, or alternatively downstream bridge or
> >>> panel is very painful.
> >>
> >> Yeah I think this looks mostly reasonable. Some api design comments on top
> >> of Andrzej', with the fair warning that I didn't bother to read up on how
> >> it's all used in the end. I probably should go and do that, at least to
> >> get a feeling for what your hpd_cb usually does.
> >>
> >>> More comments inlined.
> >>>
> >>> On 07.07.2019 20:18, Laurent Pinchart wrote:
> >>>> To support implementation of DRM connectors on top of DRM bridges
> >>>> instead of by bridges, the drm_bridge needs to expose new operations and
> >>>> data:
> >>>>
> >>>> - Output detection, hot-plug notification, mode retrieval and EDID
> >>>> retrieval operations
> >>>> - Bitmask of supported operations
> >>>
> >>>
> >>> Why do we need these bitmask at all? Why cannot we rely on presence of
> >>> operation's callback?
> >>
> >> Yeah also not a huge fan of these bitmasks. Smells like
> >> DRIVER_GEM|DRIVER_MODESET, and I personally really hate those. Easy to
> >> add, generally good excuse to not have to think through the design between
> >> different parts of drivers - "just" add another flag.
> >
> > The reason is that a bridge may support an operation (as in implemented
> > in the bridge hardware), but that operation may not be supported on a
> > particular board. For instance an HDMI encoder may support reading EDID
> > when the DDC lines are connected to the encoder, but a board may connect
> > the DDC lines to an I2C port of the SoC. We thus need to decouple
> > if a particular instance of the device supports the operation (exposed
> > by the ops flags) from the function pointers.
> >
> > We could of course allocate the drm_bridge_funcs structure dynamically
> > for each bridge instance, and fill it with function pointers manually,
> > leaving the unused ops always NULL, but that would require making the
> > structure writable, which is considered a security issue. That's why I
> > decided to keep the drm_bridge_funcs structure as a global static const
> > structure, and add an ops bitmask.
>
> Yeah reallocating func structures is not great, I agree ...
>
> Would an -ENXIO at runtime work too? Or do we need to know this
> statically. It just feels so silly and redundant to have the flag and the
> hook.
That would mean that the operation would need to be called in order to
determine if the bridge offers that particular capability. For some
operations we want to know ahead of time, for instance to determine at
connector creation time if HPD needs to be polled. At that time we don't
necessarily have the required arguments to call the information, and
even if we do, the operation could have side effects that are not
desired.
> >>>> - Bridge output type
> >>>>
> >>>> Add and document these.
> >>>>
> >>>> Three new bridge helper functions are also added to handle hot plug
> >>>> notification in a way that is as transparent as possible for the
> >>>> bridges.
> >>>
> >>> Documentation of new opses does not explain how it should cooperate with
> >>> bridge chaining, I suppose they should be chained explicitly, am I
> >>> right? More comments about it later.
> >
> > No, the whole point is that they should not be chained at all. A bridge
> > does not have to propagate, for instance, .get_edid() to the next
> > bridge. That's one of the core design principles in this series, I want
> > to keep the bridges as simple as possible, and move the complexity of
> > the boilerplate code that is currently copied all around to helpers. See
> > patch "drm: Add helper to create a connector for a chain of bridges" for
> > more information about how this is used, with a helper that delegates
> > the connector operations to the correct bridge in the chain based on the
> > ops reported by each bridge.
>
> Sounds like we have a general discussion of who should be owning the
> topology around bridges. I guess there's arguments for both positions ...
>
> Not sure what to do, aside from that I'm not a huge fan of flags
> everywhere. But if that's the best we can do, so be it :-/
I understand your concern, and I wasn't very happy to have to introduce
a bitmask in addition to function pointers, but it was the best
middleground I could find. I'll keep your comments in mind in case I can
find a better solution, but so far I believe this is the best option to
keep bridge code simple and to make the API well-defined.
> >>>> Signed-off-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
> >>>> ---
> >>>> drivers/gpu/drm/drm_bridge.c | 92 +++++++++++++++++++
> >>>> include/drm/drm_bridge.h | 170 ++++++++++++++++++++++++++++++++++-
> >>>> 2 files changed, 261 insertions(+), 1 deletion(-)
> >>>>
> >>>> diff --git a/drivers/gpu/drm/drm_bridge.c b/drivers/gpu/drm/drm_bridge.c
> >>>> index 519577f363e3..3c2a255df7af 100644
> >>>> --- a/drivers/gpu/drm/drm_bridge.c
> >>>> +++ b/drivers/gpu/drm/drm_bridge.c
> >>>> @@ -70,6 +70,8 @@ static LIST_HEAD(bridge_list);
> >>>> */
> >>>> void drm_bridge_add(struct drm_bridge *bridge)
> >>>> {
> >>>> + mutex_init(&bridge->hpd_mutex);
> >>>> +
> >>>> mutex_lock(&bridge_lock);
> >>>> list_add_tail(&bridge->list, &bridge_list);
> >>>> mutex_unlock(&bridge_lock);
> >>>> @@ -86,6 +88,8 @@ void drm_bridge_remove(struct drm_bridge *bridge)
> >>>> mutex_lock(&bridge_lock);
> >>>> list_del_init(&bridge->list);
> >>>> mutex_unlock(&bridge_lock);
> >>>> +
> >>>> + mutex_destroy(&bridge->hpd_mutex);
> >>>> }
> >>>> EXPORT_SYMBOL(drm_bridge_remove);
> >>>>
> >>>> @@ -463,6 +467,94 @@ void drm_atomic_bridge_enable(struct drm_bridge *bridge,
> >>>> }
> >>>> EXPORT_SYMBOL(drm_atomic_bridge_enable);
> >>>>
> >>>> +/**
> >>>> + * drm_bridge_hpd_enable - enable hot plug detection for the bridge
> >>>> + * @bridge: bridge control structure
> >>>> + * @cb: hot-plug detection callback
> >>>> + * @data: data to be passed to the hot-plug detection callback
> >>>> + *
> >>>> + * Call &drm_bridge_funcs.hpd_enable and register the given @cb and @data as
> >>>> + * hot plug notification callback. From now on the @cb will be called with
> >>>> + * @data when an output status change is detected by the bridge, until hot plug
> >>>> + * notification gets disabled with drm_bridge_hpd_disable().
> >>>> + *
> >>>> + * Hot plug detection is supported only if the DRM_BRIDGE_OP_HPD flag is set in
> >>>> + * bridge->ops. This function shall not be called when the flag is not set.
> >>>> + *
> >>>> + * Only one hot plug detection callback can be registered at a time, it is an
> >>>> + * error to call this function when hot plug detection is already enabled for
> >>>> + * the bridge.
> >>>> + */
> >>>
> >>> To simplify architecture maybe would be better to enable hpd just on
> >>> bridge attach:
> >>>
> >>> bridge->hpd_cb = cb;
> >>>
> >>> bridge->hpd_data = data;
> >>>
> >>> ret = drm_bridge_attach(...);
> >>
> >> Yeah I like this more. The other problem here is, what if you need more
> >> than 1 callback registers on the same bridge hdp signal?
> >
> > That's why I decided to hide hide HPD through helpers,
> > drm_bridge_hpd_enable() and drm_bridge_hpd_disable() on the listener
> > side, and drm_bridge_hpd_notify() on the event reporter side. While the
> > current implementation is limited to a single listener, only the helpers
> > would need to be changed to extend that to multiple listeners.
> >
> > Note that the .hpd_enable() and .hpd_disable() operations also allow the
> > bridge to disable HPD detection when not used. Doing so keeps the bridge
> > simple, it only needs to care about reporting HPD events when they're
> > enabled, without caring who (if anyone) is listening, and gets clear
> > instructions on whether to enable or disable the HPD hardware (in case
> > it can be disabled).
> >
> >>> This way we could avoid adding new callbacks hpd_(enable|disable)
> >>> without big sacrifices.
> >>>
> >>> One more thing: HPD in DisplayPort/HDMI beside signalling plug/unplug,
> >>> notifies about sink status change, how it translates to this cb?
> >
> > This is something this series doesn't implement. I don't think it would
> > be a big deal, but my knowledge of HPD (especially for DisplayPort) ends
> > here. If you can elaborate on what would be needed, I can implement
> > that.
> >
> >>>> +void drm_bridge_hpd_enable(struct drm_bridge *bridge,
> >>>> + void (*cb)(void *data,
> >>>> + enum drm_connector_status status),
> >>>> + void *data)
> >>>> +{
> >>>> + if (!bridge || !bridge->funcs->hpd_enable)
> >>>> + return;
> >>>> +
> >>>> + mutex_lock(&bridge->hpd_mutex);
> >>>> +
> >>>> + if (WARN(bridge->hpd_cb, "Hot plug detection already enabled\n"))
> >>>> + goto unlock;
> >>>> +
> >>>> + bridge->hpd_cb = cb;
> >>>> + bridge->hpd_data = data;
> >>>> +
> >>>> + bridge->funcs->hpd_enable(bridge);
> >>>> +
> >>>> +unlock:
> >>>> + mutex_unlock(&bridge->hpd_mutex);
> >>>> +}
> >>>> +EXPORT_SYMBOL_GPL(drm_bridge_hpd_enable);
> >>>> +
> >>>> +/**
> >>>> + * drm_bridge_hpd_disable - disable hot plug detection for the bridge
> >>>> + * @bridge: bridge control structure
> >>>> + *
> >>>> + * Call &drm_bridge_funcs.hpd_disable and unregister the hot plug detection
> >>>> + * callback previously registered with drm_bridge_hpd_enable(). Once this
> >>>> + * function returns the callback will not be called by the bridge when an
> >>>> + * output status change occurs.
> >>>> + *
> >>>> + * Hot plug detection is supported only if the DRM_BRIDGE_OP_HPD flag is set in
> >>>> + * bridge->ops. This function shall not be called when the flag is not set.
> >>>> + */
> >>>> +void drm_bridge_hpd_disable(struct drm_bridge *bridge)
> >>>> +{
> >>>> + if (!bridge || !bridge->funcs->hpd_disable)
> >>>> + return;
> >>>> +
> >>>> + mutex_lock(&bridge->hpd_mutex);
> >>>> + bridge->funcs->hpd_disable(bridge);
> >>>> +
> >>>> + bridge->hpd_cb = NULL;
> >>>> + bridge->hpd_data = NULL;
> >>>> + mutex_unlock(&bridge->hpd_mutex);
> >>>> +}
> >>>> +EXPORT_SYMBOL_GPL(drm_bridge_hpd_disable);
> >>>> +
> >>>> +/**
> >>>> + * drm_bridge_hpd_notify - notify hot plug detection events
> >>>> + * @bridge: bridge control structure
> >>>> + * @status: output connection status
> >>>> + *
> >>>> + * Bridge drivers shall call this function to report hot plug events when they
> >>>> + * detect a change in the output status, when hot plug detection has been
> >>>> + * enabled by the &drm_bridge_funcs.hpd_enable callback.
> >>>> + *
> >>>> + * This function shall be called in a context that can sleep.
> >>>> + */
> >>>> +void drm_bridge_hpd_notify(struct drm_bridge *bridge,
> >>>> + enum drm_connector_status status)
> >>>> +{
> >>>> + mutex_lock(&bridge->hpd_mutex);
> >>>> + if (bridge->hpd_cb)
> >>>> + bridge->hpd_cb(bridge->hpd_data, status);
> >>
> >> So this isn't quite what I had in mind. Instead something like this:
> >>
> >> /* iterates over all bridges in the chain containing @bridge */
> >> for_each_bridge(tmp_bridge, bridge) {
> >> if (tmp_bridge == bridge)
> >> continue;
> >> if (bridge->hpd_notify);
> >> bridge->hpd_notify(tmp_bridge, bridge, status);
> >> }
> >>
> >> encoder = encoder_for_bridge(bridge);
> >> if (encoder->helper_private->bridge_hpd_notify)
> >> encoder->helper_private->bridge_hpd_notify(encoder, bridge, status);
> >>
> >> dev = bridge->dev
> >> if (dev->mode_config.helper_private->bridge_hpd_notify)
> >> dev->mode_config.helper_private->bridge_hpd_notify(dev, bridge, status)
> >>
> >> No register callback needed, no locking needed, everyone gets exactly the
> >> hpd they want/need.
> >
> > I'll reply to this further down the mail thread, to address additional
> > comments.
> >
> >>>> + mutex_unlock(&bridge->hpd_mutex);
> >>>> +}
> >>>> +EXPORT_SYMBOL_GPL(drm_bridge_hpd_notify);
> >>>> +
> >>>> #ifdef CONFIG_OF
> >>>> /**
> >>>> * of_drm_find_bridge - find the bridge corresponding to the device node in
> >>>> diff --git a/include/drm/drm_bridge.h b/include/drm/drm_bridge.h
> >>>> index 08dc15f93ded..b9445aa5b1ef 100644
> >>>> --- a/include/drm/drm_bridge.h
> >>>> +++ b/include/drm/drm_bridge.h
> >>>> @@ -23,8 +23,9 @@
> >>>> #ifndef __DRM_BRIDGE_H__
> >>>> #define __DRM_BRIDGE_H__
> >>>>
> >>>> -#include <linux/list.h>
> >>>> #include <linux/ctype.h>
> >>>> +#include <linux/list.h>
> >>>> +#include <linux/mutex.h>
> >>>> #include <drm/drm_mode_object.h>
> >>>> #include <drm/drm_modes.h>
> >>>>
> >>>> @@ -334,6 +335,110 @@ struct drm_bridge_funcs {
> >>>> */
> >>>> void (*atomic_post_disable)(struct drm_bridge *bridge,
> >>>> struct drm_atomic_state *state);
> >>>> +
> >>>> + /**
> >>>> + * @detect:
> >>>> + *
> >>>> + * Check if anything is attached to the bridge output.
> >>>> + *
> >>>> + * This callback is optional, if not implemented the bridge will be
> >>>> + * considered as always having a component attached to its output.
> >>>> + * Bridges that implement this callback shall set the
> >>>> + * DRM_BRIDGE_OP_DETECT flag in their &drm_bridge->ops.
> >>>> + *
> >>>> + * RETURNS:
> >>>> + *
> >>>> + * drm_connector_status indicating the bridge output status.
> >>>> + */
> >>>> + enum drm_connector_status (*detect)(struct drm_bridge *bridge);
> >>>> +
> >>>> + /**
> >>>> + * @get_modes:
> >>>> + *
> >>>> + * Fill all modes currently valid for the sink into the &drm_connector
> >>>> + * with drm_mode_probed_add().
> >>>> + *
> >>>> + * The @get_modes callback is mostly intended to support non-probable
> >>>> + * displays such as many fixed panels. Bridges that support reading
> >>>> + * EDID shall leave @get_modes unimplemented and implement the
> >>>> + * &drm_bridge_funcs->get_edid callback instead.
> >>>> + *
> >>>> + * This callback is optional. Bridges that implement it shall set the
> >>>> + * DRM_BRIDGE_OP_MODES flag in their &drm_bridge->ops.
> >>>> + *
> >>>> + * RETURNS:
> >>>> + *
> >>>> + * The number of modes added by calling drm_mode_probed_add().
> >>>> + */
> >>>> + int (*get_modes)(struct drm_bridge *bridge,
> >>>> + struct drm_connector *connector);
> >>>> +
> >>>> + /**
> >>>> + * @get_edid:
> >>>> + *
> >>>> + * Read and parse the EDID data of the connected display.
> >>>> + *
> >>>> + * The @get_edid callback is the preferred way of reporting mode
> >>>> + * information for a display connected to the bridge output. Bridges
> >>>> + * that support readind EDID shall implement this callback and leave
> >>>> + * the @get_modes callback unimplemented.
> >>>> + *
> >>>> + * The caller of this operation shall first verify the output
> >>>> + * connection status and refrain from reading EDID from a disconnected
> >>>> + * output.
> >>>> + *
> >>>> + * This callback is optional. Bridges that implement it shall set the
> >>>> + * DRM_BRIDGE_OP_EDID flag in their &drm_bridge->ops.
> >>>> + *
> >>>> + * RETURNS:
> >>>> + *
> >>>> + * An edid structure newly allocated with kmalloc() (or similar) on
> >>>> + * success, or NULL otherwise. The caller is responsible for freeing
> >>>> + * the returned edid structure with kfree().
> >>>> + */
> >>>> + struct edid *(*get_edid)(struct drm_bridge *bridge,
> >>>> + struct drm_connector *connector);
> >>>
> >>> It overlaps with get_modes, I guess presence of one ops should disallow
> >>> presence of another one?
> >>>
> >>> I am not really convinced we need this op at all, cannot we just assign
> >>> some helper function to .get_modes cb, which will do the same?
> >>
> >> Plan B): ditch ->get_edid, require that the driver has ->get_modes in that
> >> case, and require that if it has an edid it must fill out connector->info
> >> and connector->edid correctly.
> >
> > I think that's doable, I'll have a look.
> >
> >> Btw if a hpd happens, who's responible for making sure the edid/mode list
> >> in the connector is up-to-date? With your current callback design that's
> >> up to the callback, which doesn't feel great. Maybe drm_bridge_hpd_notify
> >> should guarantee that it'll first walk the connectors to update status and
> >> edid/mode list for the final drm_connector. And then instead of just
> >> passing the simple "status", it'll pass the connector, with everything
> >> correctly updated.
> >>
> >> Otherwise everyone interested in that hpd signal will go and re-fetch the
> >> edid, which is not so awesome :-)
> >
> > With the current design there's a single listener, so it's not a big
> > deal :-) Furthermore, the listener is the helper that creates a
> > connector on top of a chain of bridges, so it's a pretty good place to
> > handle this. See the call to drm_kms_helper_hotplug_event() in
> > drm_bridge_connector_hpd_cb().
> >
> > I'm all for reworking HPD and mode fetching, but I think it's a bit too
> > big of a requirement as a prerequisite for this series (or as part of
> > this series). We have hardware that can report HPD with various level of
> > details (from "something happened on a connector" to "this particular
> > event happened on this particular connector"), and we channel that
> > through helpers such as drm_kms_helper_hotplug_event() that lose the
> > details and go through a heavy mechanism to refetch everything. I
> > understand this is needed in many cases, but I think there's room for
> > improvement. This series, in my opinion, doesn't go in the wrong
> > direction in that regard, as it eventually calls
> > drm_kms_helper_hotplug_event(), so I think improvements would make sense
> > on top of it. I'm even willing to work on this, provided I get feedback
> > on what is desired.
> >
> >>>> + /**
> >>>> + * @lost_hotplug:
> >>>> + *
> >>>> + * Notify the bridge of display disconnection.
> >>>> + *
> >>>> + * This callback is optional, it may be implemented by bridges that
> >>>> + * need to be notified of display disconnection for internal reasons.
> >>>> + * One use case is to reset the internal state of CEC controllers for
> >>>> + * HDMI bridges.
> >>>> + */
> >>>> + void (*lost_hotplug)(struct drm_bridge *bridge);
> >>>> +
> >>>> + /**
> >>>> + * @hpd_enable:
> >>>> + *
> >>>> + * Enable hot plug detection. From now on the bridge shall call
> >>>> + * drm_bridge_hpd_notify() each time a change is detected in the output
> >>>> + * connection status, until hot plug detection gets disabled with
> >>>> + * @hpd_disable.
> >>>> + *
> >>>> + * This callback is optional and shall only be implemented by bridges
> >>>> + * that support hot-plug notification without polling. Bridges that
> >>>> + * implement it shall also implement the @hpd_disable callback and set
> >>>> + * the DRM_BRIDGE_OP_HPD flag in their &drm_bridge->ops.
> >>>> + */
> >>>> + void (*hpd_enable)(struct drm_bridge *bridge);
> >>>> +
> >>>> + /**
> >>>> + * @hpd_disable:
> >>>> + *
> >>>> + * Disable hot plug detection. Once this function returns the bridge
> >>>> + * shall not call drm_bridge_hpd_notify() when a change in the output
> >>>> + * connection status occurs.
> >>>> + *
> >>>> + * This callback is optional and shall only be implemented by bridges
> >>>> + * that support hot-plug notification without polling. Bridges that
> >>>> + * implement it shall also implement the @hpd_enable callback and set
> >>>> + * the DRM_BRIDGE_OP_HPD flag in their &drm_bridge->ops.
> >>>> + */
> >>>> + void (*hpd_disable)(struct drm_bridge *bridge);
> >>>> };
> >>>>
> >>>> /**
> >>>> @@ -372,6 +477,38 @@ struct drm_bridge_timings {
> >>>> bool dual_link;
> >>>> };
> >>>>
> >>>> +/**
> >>>> + * enum drm_bridge_ops - Bitmask of operations supported by the bridge
> >>>> + */
> >>>> +enum drm_bridge_ops {
> >>>> + /**
> >>>> + * @DRM_BRIDGE_OP_DETECT: The bridge can detect displays connected to
> >>>> + * its output. Bridges that set this flag shall implement the
> >>>> + * &drm_bridge_funcs->detect callback.
> >>>> + */
> >>>> + DRM_BRIDGE_OP_DETECT = BIT(0),
> >>>> + /**
> >>>> + * @DRM_BRIDGE_OP_EDID: The bridge can retrieve the EDID of the display
> >>>> + * connected to its output. Bridges that set this flag shall implement
> >>>> + * the &drm_bridge_funcs->get_edid callback.
> >>>> + */
> >>>> + DRM_BRIDGE_OP_EDID = BIT(1),
> >>>> + /**
> >>>> + * @DRM_BRIDGE_OP_HPD: The bridge can detect hot-plug and hot-unplug
> >>>> + * without requiring polling. Bridges that set this flag shall
> >>>> + * implement the &drm_bridge_funcs->hpd_enable and
> >>>> + * &drm_bridge_funcs->disable_hpd_cb callbacks.
> >>>> + */
> >>>> + DRM_BRIDGE_OP_HPD = BIT(2),
> >>>> + /**
> >>>> + * @DRM_BRIDGE_OP_MODES: The bridge can retrieving the modes supported
> >>>> + * by the display at its output. This does not include readind EDID
> >>>> + * which is separately covered by @DRM_BRIDGE_OP_EDID. Bridges that set
> >>>> + * this flag shall implement the &drm_bridge_funcs->get_modes callback.
> >>>> + */
> >>>> + DRM_BRIDGE_OP_MODES = BIT(3),
> >>>> +};
> >>>> +
> >>>> /**
> >>>> * struct drm_bridge - central DRM bridge control structure
> >>>> */
> >>>> @@ -398,6 +535,29 @@ struct drm_bridge {
> >>>> const struct drm_bridge_funcs *funcs;
> >>>> /** @driver_private: pointer to the bridge driver's internal context */
> >>>> void *driver_private;
> >>>> + /** @ops: bitmask of operations supported by the bridge */
> >>>> + enum drm_bridge_ops ops;
> >>>> + /**
> >>>> + * @type: Type of the connection at the bridge output
> >>>> + * (DRM_MODE_CONNECTOR_*). For bridges at the end of this chain this
> >>>> + * identifies the type of connected display.
> >>>> + */
> >>>> + int type;
> >>>> + /** private: */
> >>>> + /**
> >>>> + * @hpd_mutex: Protects the @hpd_cb and @hpd_data fields.
> >>>> + */
> >>>> + struct mutex hpd_mutex;
> >>>> + /**
> >>>> + * @hpd_cb: Hot plug detection callback, registered with
> >>>> + * drm_bridge_hpd_enable().
> >>>> + */
> >>>> + void (*hpd_cb)(void *data, enum drm_connector_status status);
> >>>> + /**
> >>>> + * @hpd_data: Private data passed to the Hot plug detection callback
> >>>> + * @hpd_cb.
> >>>> + */
> >>>> + void *hpd_data;
> >>>> };
> >>>>
> >>>> void drm_bridge_add(struct drm_bridge *bridge);
> >>>> @@ -428,6 +588,14 @@ void drm_atomic_bridge_pre_enable(struct drm_bridge *bridge,
> >>>> void drm_atomic_bridge_enable(struct drm_bridge *bridge,
> >>>> struct drm_atomic_state *state);
> >>>>
> >>>> +void drm_bridge_hpd_enable(struct drm_bridge *bridge,
> >>>> + void (*cb)(void *data,
> >>>> + enum drm_connector_status status),
> >>>> + void *data);
> >>>> +void drm_bridge_hpd_disable(struct drm_bridge *bridge);
> >>>> +void drm_bridge_hpd_notify(struct drm_bridge *bridge,
> >>>> + enum drm_connector_status status);
> >>>> +
> >>>> #ifdef CONFIG_DRM_PANEL_BRIDGE
> >>>> struct drm_bridge *drm_panel_bridge_add(struct drm_panel *panel,
> >>>> u32 connector_type);
--
Regards,
Laurent Pinchart
More information about the dri-devel
mailing list