[PATCH v2 1/9] dt-bindings: panel: lvds: Add dual-link LVDS display support

[Fabrizio Castro]

Dual-link LVDS displays have two ports, therefore document this
with the bindings.

Signed-off-by: Fabrizio Castro <fabrizio.castro at bp.renesas.com>

---
v1->v2:
* Reworked the description of the ports property
* lvds0_panel_in in the example has been renamed to panel_in0
* lvds1_panel_in in the example has been renamed to panel_in1

Laurent,

in linux-next they are now working with:
Documentation/devicetree/bindings/display/panel/lvds.yaml

What should I do here?

Thanks,
Fab


 .../bindings/display/panel/panel-lvds.txt          | 95 ++++++++++++++++------
 1 file changed, 71 insertions(+), 24 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/panel/panel-lvds.txt b/Documentation/devicetree/bindings/display/panel/panel-lvds.txt
index 250850a..5231243 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-lvds.txt
+++ b/Documentation/devicetree/bindings/display/panel/panel-lvds.txt
@@ -41,7 +41,12 @@ Required nodes:
 
 - panel-timing: See panel-common.txt.
 - ports: See panel-common.txt. These bindings require a single port subnode
-  corresponding to the panel LVDS input.
+  (for a single link panel) corresponding to the panel LVDS input, or two port
+  subnodes (for a dual link panel) corresponding to the panel LVDS inputs.
+  Dual-link LVDS panels expect even pixels (0, 2, 4, etc.) and odd pixels (1, 3,
+  5, etc.) on different input ports, it's up to the panel-specific bindings to
+  specify what port is expecting even pixels, and what port is expecting odd
+  pixels.
 
 
 LVDS data mappings are defined as follows.
@@ -92,30 +97,72 @@ CTL3: 0
 Example
 -------
 
-panel {
-	compatible = "mitsubishi,aa121td01", "panel-lvds";
-
-	width-mm = <261>;
-	height-mm = <163>;
-
-	data-mapping = "jeida-24";
-
-	panel-timing {
-		/* 1280x800 @60Hz */
-		clock-frequency = <71000000>;
-		hactive = <1280>;
-		vactive = <800>;
-		hsync-len = <70>;
-		hfront-porch = <20>;
-		hback-porch = <70>;
-		vsync-len = <5>;
-		vfront-porch = <3>;
-		vback-porch = <15>;
+Single port:
+	panel {
+		compatible = "mitsubishi,aa121td01", "panel-lvds";
+
+		width-mm = <261>;
+		height-mm = <163>;
+
+		data-mapping = "jeida-24";
+
+		panel-timing {
+			/* 1280x800 @60Hz */
+			clock-frequency = <71000000>;
+			hactive = <1280>;
+			vactive = <800>;
+			hsync-len = <70>;
+			hfront-porch = <20>;
+			hback-porch = <70>;
+			vsync-len = <5>;
+			vfront-porch = <3>;
+			vback-porch = <15>;
+		};
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds_encoder>;
+			};
+		};
 	};
 
-	port {
-		panel_in: endpoint {
-			remote-endpoint = <&lvds_encoder>;
+Two ports:
+	panel {
+		compatible = "advantech,idk-2121wr", "panel-lvds";
+
+		width-mm = <476>;
+		height-mm = <268>;
+
+		data-mapping = "vesa-24";
+
+		panel-timing {
+			clock-frequency = <148500000>;
+			hactive = <1920>;
+			vactive = <1080>;
+			hsync-len = <44>;
+			hfront-porch = <88>;
+			hback-porch = <148>;
+			vfront-porch = <4>;
+			vback-porch = <36>;
+			vsync-len = <5>;
+		};
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port at 0 {
+				reg = <0>;
+				panel_in0: endpoint {
+					remote-endpoint = <&lvds0_out>;
+				};
+			};
+
+			port at 1 {
+				reg = <1>;
+				panel_in1: endpoint {
+					remote-endpoint = <&lvds1_out>;
+				};
+			};
 		};
 	};
-};
-- 
2.7.4