[PATCH 09/11] ARM: dts: qcom: pm8941: add 5vs2 regulator node

[Brian Masney]

On Thu, Aug 15, 2019 at 10:34:17AM +0200, Linus Walleij wrote:
> On Thu, Aug 15, 2019 at 2:49 AM Brian Masney <masneyb at onstation.org> wrote:
> 
> > pm8941 is missing the 5vs2 regulator node so let's add it since its
> > needed to get the external display working. This regulator was already
> > configured in the interrupts property on the parent node.
> >
> > Note that this regulator is referred to as mvs2 in the downstream MSM
> > kernel sources.
> 
> When I looked at it it seemed like this convention is used for power
> supplies that appear on both the main PMIC and the "extra (boot? basic?
> low power?) PMIC that the main 80xx PMIC has mvs1 and the
> other 89xx PMIC has mvs2.

According to the downstream MSM sources, the 5vs1 and 5vs2 rails are
both on the second pm8941 PMIC:

https://github.com/AICP/kernel_lge_hammerhead/blob/n7.1/arch/arm/boot/dts/msm8974-regulator.dtsi#L18

> I suppose it is named "mvs" on both PMICs and this is just a rail
> name so as not to confuse the schematic?

That sounds reasonable.

> > Signed-off-by: Brian Masney <masneyb at onstation.org>
> 
> Reviewed-by: Linus Walleij <linus.walleij at linaro.org>

Thank you!

Brian