[PATCH] video: fbdev:via: Remove dead code

[Souptick Joarder]

On Mon, Aug 12, 2019 at 5:37 PM Souptick Joarder <jrdr.linux at gmail.com> wrote:
>
> On Wed, Aug 7, 2019 at 2:11 PM Souptick Joarder <jrdr.linux at gmail.com> wrote:
> >
> > On Wed, Jul 31, 2019 at 12:59 AM Souptick Joarder <jrdr.linux at gmail.com> wrote:
> > >
> > > This is dead code since 3.15. If there is no plan to use
> > > it further, this can be removed forever.
> > >
> >
> > Any comment on this patch ?
>
> Any comment on this patch ?

If no comment can we get this in queue for 5.4 ?

>
> >
> > > Signed-off-by: Souptick Joarder <jrdr.linux at gmail.com>
> > > ---
> > >  drivers/video/fbdev/via/via-core.c | 43 --------------------------------------
> > >  1 file changed, 43 deletions(-)
> > >
> > > diff --git a/drivers/video/fbdev/via/via-core.c b/drivers/video/fbdev/via/via-core.c
> > > index e2b2062..ffa2ca2 100644
> > > --- a/drivers/video/fbdev/via/via-core.c
> > > +++ b/drivers/video/fbdev/via/via-core.c
> > > @@ -221,49 +221,6 @@ void viafb_release_dma(void)
> > >  }
> > >  EXPORT_SYMBOL_GPL(viafb_release_dma);
> > >
> > > -
> > > -#if 0
> > > -/*
> > > - * Copy a single buffer from FB memory, synchronously.  This code works
> > > - * but is not currently used.
> > > - */
> > > -void viafb_dma_copy_out(unsigned int offset, dma_addr_t paddr, int len)
> > > -{
> > > -       unsigned long flags;
> > > -       int csr;
> > > -
> > > -       mutex_lock(&viafb_dma_lock);
> > > -       init_completion(&viafb_dma_completion);
> > > -       /*
> > > -        * Program the controller.
> > > -        */
> > > -       spin_lock_irqsave(&global_dev.reg_lock, flags);
> > > -       viafb_mmio_write(VDMA_CSR0, VDMA_C_ENABLE|VDMA_C_DONE);
> > > -       /* Enable ints; must happen after CSR0 write! */
> > > -       viafb_mmio_write(VDMA_MR0, VDMA_MR_TDIE);
> > > -       viafb_mmio_write(VDMA_MARL0, (int) (paddr & 0xfffffff0));
> > > -       viafb_mmio_write(VDMA_MARH0, (int) ((paddr >> 28) & 0xfff));
> > > -       /* Data sheet suggests DAR0 should be <<4, but it lies */
> > > -       viafb_mmio_write(VDMA_DAR0, offset);
> > > -       viafb_mmio_write(VDMA_DQWCR0, len >> 4);
> > > -       viafb_mmio_write(VDMA_TMR0, 0);
> > > -       viafb_mmio_write(VDMA_DPRL0, 0);
> > > -       viafb_mmio_write(VDMA_DPRH0, 0);
> > > -       viafb_mmio_write(VDMA_PMR0, 0);
> > > -       csr = viafb_mmio_read(VDMA_CSR0);
> > > -       viafb_mmio_write(VDMA_CSR0, VDMA_C_ENABLE|VDMA_C_START);
> > > -       spin_unlock_irqrestore(&global_dev.reg_lock, flags);
> > > -       /*
> > > -        * Now we just wait until the interrupt handler says
> > > -        * we're done.
> > > -        */
> > > -       wait_for_completion_interruptible(&viafb_dma_completion);
> > > -       viafb_mmio_write(VDMA_MR0, 0); /* Reset int enable */
> > > -       mutex_unlock(&viafb_dma_lock);
> > > -}
> > > -EXPORT_SYMBOL_GPL(viafb_dma_copy_out);
> > > -#endif
> > > -
> > >  /*
> > >   * Do a scatter/gather DMA copy from FB memory.  You must have done
> > >   * a successful call to viafb_request_dma() first.
> > > --
> > > 1.9.1
> > >