[PATCH 14/14] drm/amd/display: Trigger modesets on MST DSC connectors
David Francis
David.Francis at amd.com
Mon Aug 19 15:50:38 UTC 2019
Whenever a connector on an MST network is attached, detached, or
undergoes a modeset, the DSC configs for each stream on that
topology will be recalculated. This can change their required
bandwidth, requiring a full reprogramming, as though a modeset
was performed, even if that stream did not change timing.
Therefore, whenever a crtc has drm_atomic_crtc_needs_modeset,
for each crtc that shares a MST topology with that stream and
supports DSC, add that crtc (and all affected connectors and
planes) to the atomic state and set mode_changed on its state
Cc: Leo Li <sunpeng.li at amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas at amd.com>
Signed-off-by: David Francis <David.Francis at amd.com>
---
.../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 80 +++++++++++++++++++
1 file changed, 80 insertions(+)
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index 145fd73025dc..8d5357aec5e8 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -6475,7 +6475,78 @@ static int do_aquire_global_lock(struct drm_device *dev,
return ret < 0 ? ret : 0;
}
+#ifdef CONFIG_DRM_AMD_DC_DSC_SUPPORT
+static int add_affected_mst_dsc_crtcs(struct drm_atomic_state *state, struct drm_crtc *crtc)
+{
+ struct drm_connector *connector;
+ struct drm_connector_state *conn_state;
+ struct drm_connector_list_iter conn_iter;
+ struct drm_crtc_state *new_crtc_state;
+ struct amdgpu_dm_connector *aconnector = NULL, *aconnector_to_add;
+ int i, j, ret;
+ struct drm_crtc *crtcs_affected[MAX_PIPES] = { 0 };
+
+ for_each_new_connector_in_state(state, connector, conn_state, i) {
+ if (conn_state->crtc != crtc)
+ continue;
+
+ aconnector = to_amdgpu_dm_connector(connector);
+ if (!aconnector->port)
+ aconnector = NULL;
+ else
+ break;
+ }
+
+ if (!aconnector)
+ return 0;
+
+ i = 0;
+ drm_connector_list_iter_begin(state->dev, &conn_iter);
+ drm_for_each_connector_iter(connector, &conn_iter) {
+ if (!connector->state || !connector->state->crtc)
+ continue;
+
+ aconnector_to_add = to_amdgpu_dm_connector(connector);
+ if (!aconnector_to_add->port)
+ continue;
+
+ if (aconnector_to_add->port->mgr != aconnector->port->mgr)
+ continue;
+
+ if (!aconnector_to_add->dc_sink)
+ continue;
+
+ if (!aconnector_to_add->dc_sink->sink_dsc_caps.dsc_dec_caps.is_dsc_supported)
+ continue;
+ if (i >= MAX_PIPES)
+ continue;
+
+ crtcs_affected[i] = connector->state->crtc;
+ i++;
+ }
+ drm_connector_list_iter_end(&conn_iter);
+
+ for (j = 0; j < i; j++) {
+ new_crtc_state = drm_atomic_get_crtc_state(state, crtcs_affected[j]);
+ if (IS_ERR(new_crtc_state))
+ return PTR_ERR(new_crtc_state);
+
+ new_crtc_state->mode_changed = true;
+
+ ret = drm_atomic_add_affected_connectors(state, crtcs_affected[j]);
+ if (ret)
+ return ret;
+
+ ret = drm_atomic_add_affected_planes(state, crtcs_affected[j]);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+
+}
+#endif
static void get_freesync_config_for_crtc(
struct dm_crtc_state *new_crtc_state,
struct dm_connector_state *new_con_state)
@@ -7178,6 +7249,15 @@ static int amdgpu_dm_atomic_check(struct drm_device *dev,
goto fail;
}
+#ifdef CONFIG_DRM_AMD_DC_DSC_SUPPORT
+ for_each_oldnew_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) {
+ if (drm_atomic_crtc_needs_modeset(new_crtc_state)) {
+ ret = add_affected_mst_dsc_crtcs(state, crtc);
+ if (ret)
+ goto fail;
+ }
+ }
+#endif
/*
* Add all primary and overlay planes on the CRTC to the state
* whenever a plane is enabled to maintain correct z-ordering
--
2.17.1
More information about the dri-devel
mailing list