[RFC 07/11] drm/bridge: dw-hdmi: allow ycbcr420 modes for >= 0x200a

[Neil Armstrong]

Now the DW-HDMI Controller supports the HDMI2.0 modes, enable support
for these modes in the connector if the platform supports them.
We limit these modes to DW-HDMI IP version >= 0x200a which
are designed to support HDMI2.0 display modes.

Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
---
 drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 6 ++++++
 include/drm/bridge/dw_hdmi.h              | 1 +
 2 files changed, 7 insertions(+)

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index 316823abdd00..cb560b231d74 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -2793,6 +2793,12 @@ __dw_hdmi_probe(struct platform_device *pdev,
 	hdmi->bridge.of_node = pdev->dev.of_node;
 #endif
 
+	if (hdmi->version >= 0x200a)
+		hdmi->connector.ycbcr_420_allowed =
+			hdmi->plat_data->ycbcr_420_allowed;
+	else
+		hdmi->connector.ycbcr_420_allowed = false;
+
 	memset(&pdevinfo, 0, sizeof(pdevinfo));
 	pdevinfo.parent = dev;
 	pdevinfo.id = PLATFORM_DEVID_AUTO;
diff --git a/include/drm/bridge/dw_hdmi.h b/include/drm/bridge/dw_hdmi.h
index c402364aec0d..04e63ed29417 100644
--- a/include/drm/bridge/dw_hdmi.h
+++ b/include/drm/bridge/dw_hdmi.h
@@ -126,6 +126,7 @@ struct dw_hdmi_plat_data {
 					   const struct drm_display_mode *mode);
 	unsigned long input_bus_format;
 	unsigned long input_bus_encoding;
+	bool ycbcr_420_allowed;
 
 	/* Vendor PHY support */
 	const struct dw_hdmi_phy_ops *phy_ops;
-- 
2.22.0