[PATCH 1/3] drm/vc4/vc4_hdmi: fill in connector info

[Hans Verkuil]

From: Dariusz Marcinkiewicz <darekm at google.com>

Fill in the connector info, allowing userspace to associate
the CEC device with the drm connector.

Tested on a Raspberry Pi 3B.

Signed-off-by: Dariusz Marcinkiewicz <darekm at google.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco at xs4all.nl>
Tested-by: Hans Verkuil <hverkuil-cisco at xs4all.nl>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index ee7d4e7b0ee3..0853b980bcb3 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -1285,6 +1285,9 @@ static const struct cec_adap_ops vc4_hdmi_cec_adap_ops = {
 
 static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data)
 {
+#ifdef CONFIG_DRM_VC4_HDMI_CEC
+	struct cec_connector_info conn_info;
+#endif
 	struct platform_device *pdev = to_platform_device(dev);
 	struct drm_device *drm = dev_get_drvdata(master);
 	struct vc4_dev *vc4 = drm->dev_private;
@@ -1403,13 +1406,15 @@ static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data)
 #ifdef CONFIG_DRM_VC4_HDMI_CEC
 	hdmi->cec_adap = cec_allocate_adapter(&vc4_hdmi_cec_adap_ops,
 					      vc4, "vc4",
-					      CEC_CAP_TRANSMIT |
-					      CEC_CAP_LOG_ADDRS |
-					      CEC_CAP_PASSTHROUGH |
-					      CEC_CAP_RC, 1);
+					      CEC_CAP_DEFAULTS |
+					      CEC_CAP_CONNECTOR_INFO, 1);
 	ret = PTR_ERR_OR_ZERO(hdmi->cec_adap);
 	if (ret < 0)
 		goto err_destroy_conn;
+
+	cec_fill_conn_info_from_drm(&conn_info, hdmi->connector);
+	cec_s_conn_info(hdmi->cec_adap, &conn_info);
+
 	HDMI_WRITE(VC4_HDMI_CPU_MASK_SET, 0xffffffff);
 	value = HDMI_READ(VC4_HDMI_CEC_CNTRL_1);
 	value &= ~VC4_HDMI_CEC_DIV_CLK_CNT_MASK;
-- 
2.20.1