[PATCH 3/3] drm/bridge/adv7511: enable CEC connector info
Laurent Pinchart
laurent.pinchart at ideasonboard.com
Mon Aug 26 10:13:06 UTC 2019
Hi Hans,
On Mon, Aug 26, 2019 at 11:01:40AM +0200, Hans Verkuil wrote:
> On 8/23/19 9:01 PM, Laurent Pinchart wrote:
> > (And CC'ing Andrzej Hajda and Neil Armstrong as the new DRM bridge
> > maintainers, as well as Boris Brezillon, to make sure they're aware of
> > the problem)
> >
> > I would really appreciate if we could delay merging this series and
> > other similar changes until we find a proper solution.
> >
> > On Fri, Aug 23, 2019 at 09:58:47PM +0300, Laurent Pinchart wrote:
> >> On Fri, Aug 23, 2019 at 01:24:27PM +0200, Hans Verkuil wrote:
> >>> Set the connector info to help userspace associate the CEC adapter
> >>> with the HDMI connector.
> >>>
> >>> This required that the cec initialization and unregistering the
> >>> CEC adapter takes place in the bridge attach and detach ops.
> >>>
> >>> Tested on an R-Car Koelsch board.
> >>>
> >>> Signed-off-by: Hans Verkuil <hverkuil-cisco at xs4all.nl>
> >>> Tested-by: Hans Verkuil <hverkuil-cisco at xs4all.nl>
> >>> ---
> >>> drivers/gpu/drm/bridge/adv7511/adv7511_cec.c | 7 ++++++-
> >>> drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 22 ++++++++++----------
> >>> 2 files changed, 17 insertions(+), 12 deletions(-)
> >>>
> >>> diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_cec.c b/drivers/gpu/drm/bridge/adv7511/adv7511_cec.c
> >>> index a20a45c0b353..accf5e232396 100644
> >>> --- a/drivers/gpu/drm/bridge/adv7511/adv7511_cec.c
> >>> +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_cec.c
> >>> @@ -302,6 +302,7 @@ static int adv7511_cec_parse_dt(struct device *dev, struct adv7511 *adv7511)
> >>>
> >>> int adv7511_cec_init(struct device *dev, struct adv7511 *adv7511)
> >>> {
> >>> + struct cec_connector_info conn_info;
> >>> unsigned int offset = adv7511->type == ADV7533 ?
> >>> ADV7533_REG_CEC_OFFSET : 0;
> >>> int ret = adv7511_cec_parse_dt(dev, adv7511);
> >>> @@ -310,7 +311,8 @@ int adv7511_cec_init(struct device *dev, struct adv7511 *adv7511)
> >>> goto err_cec_parse_dt;
> >>>
> >>> adv7511->cec_adap = cec_allocate_adapter(&adv7511_cec_adap_ops,
> >>> - adv7511, dev_name(dev), CEC_CAP_DEFAULTS, ADV7511_MAX_ADDRS);
> >>> + adv7511, dev_name(dev),
> >>> + CEC_CAP_DEFAULTS | CEC_CAP_CONNECTOR_INFO, ADV7511_MAX_ADDRS);
> >>> if (IS_ERR(adv7511->cec_adap)) {
> >>> ret = PTR_ERR(adv7511->cec_adap);
> >>> goto err_cec_alloc;
> >>> @@ -331,6 +333,9 @@ int adv7511_cec_init(struct device *dev, struct adv7511 *adv7511)
> >>> ADV7511_REG_CEC_CLK_DIV + offset,
> >>> ((adv7511->cec_clk_freq / 750000) - 1) << 2);
> >>>
> >>> + cec_fill_conn_info_from_drm(&conn_info, &adv7511->connector);
> >>> + cec_s_conn_info(adv7511->cec_adap, &conn_info);
> >>
> >> I'm painfully trying to decouple bridges and connectors, if we keep
> >> merging patches that go in the opposite direction, I'll never manage to
> >> complete this :-(
> >>
> >> Bridges are moving to a model where they won't create connectors
> >> themselves, so any new access to drm_connector contained in a bridge
> >> structure is a no-go I'm afraid (I'm replying to this patch as I know
> >> this driver best, but this comment applies to the other two patches in
> >> the series as well).
> >>
> >> Here's what I wrote in a private e-mail, regarding similar changes for
> >> the omapdrm driver.
> >>
> >> --------
> >> Please have a look at "[PATCH 00/60] drm/omap: Replace custom display
> >> drivers with drm_bridge and drm_panel", available in a new version at
> >>
> >> git://linuxtv.org/pinchartl/media.git omapdrm/bridge/devel
> >>
> >> (I will post v2 soon)
> >>
> >> The patches show the direction the omapdrm driver is taking. The goal is
> >> to decouple connectors from bridges, which I'm afraid will have an
> >> impact on associating drm_connector with a CEC adapter. This should be
> >> implemented through new drm_bridge operations, as bridges, when created,
> >> will not create drm_connector anymore.
> >>
> >> I've solved a similar problem related to associating DRM connectors with
> >> an I2C adapter for DDC. Please see the drm_bridge_connector_init()
> >> function and how the DDC adapter is handled. Something similar could be
> >> done for CEC.
> >> --------
> >>
> >> Since then v2 has been posted ("[PATCH v2 00/50] drm/omap: Replace
> >> custom display drivers with drm_bridge and drm_panel") and v3 is in
> >> preparation.
> >>
> >> So, please, let's both go in the right direction and solve the problem
> >> properly for CEC.
>
> I don't mind waiting one kernel cycle, but not longer. This CEC feature is
> ready to be rolled out, so I am not willing to wait a long time for all
> of this to land. I can help test CEC once you are going to roll this out
> for all drm drivers (except for the sti SoC, since I don't have any HW).
>
> So do you think this will land for 5.5? If yes, then I'll wait.
I really hope so !
Would you be able to try to implement this feature for the OMAP4 based
on my omapdrm/bridge/devel branch ? The other drivers should follow the
same path, so that would be a good exercise.
> >>> +
> >>> ret = cec_register_adapter(adv7511->cec_adap, dev);
> >>> if (ret)
> >>> goto err_cec_register;
> >>> diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> >>> index f6d2681f6927..bbcb996c4d4f 100644
> >>> --- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> >>> +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> >>> @@ -881,14 +881,24 @@ static int adv7511_bridge_attach(struct drm_bridge *bridge)
> >>> regmap_write(adv->regmap, ADV7511_REG_INT_ENABLE(0),
> >>> ADV7511_INT0_HPD);
> >>>
> >>> + if (!ret)
> >>> + ret = adv7511_cec_init(&adv->i2c_main->dev, adv);
> >>> return ret;
> >>> }
> >>>
> >>> +static void adv7511_bridge_detach(struct drm_bridge *bridge)
> >>> +{
> >>> + struct adv7511 *adv = bridge_to_adv7511(bridge);
> >>> +
> >>> + cec_unregister_adapter(adv->cec_adap);
> >>> +}
> >>> +
> >>> static const struct drm_bridge_funcs adv7511_bridge_funcs = {
> >>> .enable = adv7511_bridge_enable,
> >>> .disable = adv7511_bridge_disable,
> >>> .mode_set = adv7511_bridge_mode_set,
> >>> .attach = adv7511_bridge_attach,
> >>> + .detach = adv7511_bridge_detach,
> >>> };
> >>>
> >>> /* -----------------------------------------------------------------------------
> >>> @@ -1202,7 +1212,7 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
> >>> IRQF_ONESHOT, dev_name(dev),
> >>> adv7511);
> >>> if (ret)
> >>> - goto err_unregister_cec;
> >>> + goto err_i2c_unregister_packet;
> >>> }
> >>>
> >>> adv7511_power_off(adv7511);
> >>> @@ -1212,10 +1222,6 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
> >>> if (adv7511->type == ADV7511)
> >>> adv7511_set_link_config(adv7511, &link_config);
> >>>
> >>> - ret = adv7511_cec_init(dev, adv7511);
> >>> - if (ret)
> >>> - goto err_unregister_cec;
> >>> -
> >>> adv7511->bridge.funcs = &adv7511_bridge_funcs;
> >>> adv7511->bridge.of_node = dev->of_node;
> >>>
> >>> @@ -1224,10 +1230,6 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
> >>> adv7511_audio_init(dev, adv7511);
> >>> return 0;
> >>>
> >>> -err_unregister_cec:
> >>> - i2c_unregister_device(adv7511->i2c_cec);
> >>> - if (adv7511->cec_clk)
> >>> - clk_disable_unprepare(adv7511->cec_clk);
> >>> err_i2c_unregister_packet:
> >>> i2c_unregister_device(adv7511->i2c_packet);
> >>> err_i2c_unregister_edid:
> >>> @@ -1254,8 +1256,6 @@ static int adv7511_remove(struct i2c_client *i2c)
> >>>
> >>> adv7511_audio_exit(adv7511);
> >>>
> >>> - cec_unregister_adapter(adv7511->cec_adap);
> >>> -
> >>> i2c_unregister_device(adv7511->i2c_packet);
> >>> i2c_unregister_device(adv7511->i2c_edid);
> >>>
--
Regards,
Laurent Pinchart
More information about the dri-devel
mailing list