[PATCH v3 01/14] dt-bindings: display: renesas,cmm: Add R-Car CMM documentation

[Laurent Pinchart]

Hi Jacopo,

On Mon, Aug 26, 2019 at 09:59:43AM +0200, Jacopo Mondi wrote:
> On Mon, Aug 26, 2019 at 09:34:41AM +0200, Geert Uytterhoeven wrote:
> > On Sun, Aug 25, 2019 at 3:50 PM Jacopo Mondi <jacopo+renesas at jmondi.org> wrote:
> > > Add device tree bindings documentation for the Renesas R-Car Display
> > > Unit Color Management Module.
> > >
> > > CMM is the image enhancement module available on each R-Car DU video
> > > channel on R-Car Gen2 and Gen3 SoCs (V3H and V3M excluded).
> > >
> > > Signed-off-by: Jacopo Mondi <jacopo+renesas at jmondi.org>
> >
> > Thanks for your patch!
> >
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/display/renesas,cmm.txt
> > > @@ -0,0 +1,33 @@
> > > +* Renesas R-Car Color Management Module (CMM)
> > > +
> > > +Renesas R-Car image enhancement module connected to R-Car DU video channels.
> > > +
> > > +Required properties:
> > > + - compatible: shall be one or more of the following:
> > > +   - "renesas,cmm-r8a7795": for R8A7795 (R-Car H3) compatible CMM.
> > > +   - "renesas,cmm-r8a7796": for R8A7796 (R-Car M3-W) compatible CMM.
> > > +   - "renesas,cmm-r8a77965": for R8A77965 (R-Car M3-N) compatible CMM.
> > > +   - "renesas,cmm-r8a77990": for R8A77990 (R-Car E3) compatible CMM.
> > > +   - "renesas,cmm-r8a77995": for R8A77995 (R-Car D3) compatible CMM.
> >
> > Please use "renesas,<socype->-cmm" instead of "renesas,cmm-<soctype>".
> 
> I actually copied it from the r-car gpio bindings, and I liked
> cmm-<soctype> better. If you prefer I can change it though.
> 
> > > +   - "renesas,rcar-gen3-cmm": for a generic R-Car Gen3 compatible CMM.
> > > +   - "renesas,rcar-gen2-cmm": for a generic R-Car Gen2 compatible CMM.
> > > +
> > > +   When the generic compatible string is specified, the SoC-specific
> > > +   version corresponding to the platform should be listed first.
> > > +
> > > + - reg: the address base and length of the memory area where CMM control
> > > +   registers are mapped to.
> > > +
> > > + - clocks: phandle and clock-specifier pair to the CMM functional clock
> > > +   supplier.
> >
> > Thinking about yaml validation:
> >
> > power-domains?
> > resets?
> 
> They should indeed be documented.

How about converting this binding to yaml alreay ? It should be fairly
simple.

> > > +Example:
> > > +--------
> > > +
> > > +       cmm0: cmm at fea40000 {
> > > +               compatible = "renesas,cmm-r8a7796";
> > > +               reg = <0 0xfea40000 0 0x1000>;
> > > +               power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
> > > +               clocks = <&cpg CPG_MOD 711>;
> > > +               resets = <&cpg 711>;
> > > +       };

-- 
Regards,

Laurent Pinchart