[PATCH v9 4/6] misc/mei/hdcp: Fill transcoder index in port info
Sharma, Shashank
shashank.sharma at intel.com
Tue Aug 27 05:21:12 UTC 2019
On 8/27/2019 10:47 AM, Ramalingam C wrote:
> On 2019-08-27 at 10:42:33 +0530, Sharma, Shashank wrote:
>> Regards
>>
>> Shashank
>>
>> On 8/22/2019 8:49 PM, Ramalingam C wrote:
>>> For gen12+ platform we need to pass the transcoder info
>>> as part of the port info into ME FW.
>>>
>>> This change fills the payload for ME FW from hdcp_port_data.
>>>
>>> Signed-off-by: Ramalingam C <ramalingam.c at intel.com>
>>> Acked-by: Jani Nikula <jani.nikula at intel.com>
>>> ---
>>> drivers/misc/mei/hdcp/mei_hdcp.c | 11 +++++++++++
>>> drivers/misc/mei/hdcp/mei_hdcp.h | 4 +++-
>>> 2 files changed, 14 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/misc/mei/hdcp/mei_hdcp.c b/drivers/misc/mei/hdcp/mei_hdcp.c
>>> index 3638c77eba26..93027fd96c71 100644
>>> --- a/drivers/misc/mei/hdcp/mei_hdcp.c
>>> +++ b/drivers/misc/mei/hdcp/mei_hdcp.c
>>> @@ -58,6 +58,7 @@ mei_hdcp_initiate_session(struct device *dev, struct hdcp_port_data *data,
>>> session_init_in.port.integrated_port_type = data->port_type;
>>> session_init_in.port.physical_port = (u8)data->fw_ddi;
>> As this entry is only valid till GEN11.5, don't we need GEN_CHECK here, say
>> (INTEL_GEN() < 12). Is that possible in MEI_FW ?
> Shashank,
>
> Not needed, as I915 checks the GEN# while loading the transcoder detail
> into hdcp_port_data. So here we can assign whatever passed as part of
> hdcp_port_data.
>
> -Ram
Yep, just saw this in the next patch,
Please feel free to use: Reviewed-by: Shashank Sharma
<shashank.sharma at intel.com>
>> If not, probably we have to add this gen_check while filling the fw_tc part
>> in I915.
>>
>> Applies for all the changes below too.
>>
>> - Shashank
>>
>>> + session_init_in.port.attached_transcoder = (u8)data->fw_tc;
>>> session_init_in.protocol = data->protocol;
>>> byte = mei_cldev_send(cldev, (u8 *)&session_init_in,
>>> @@ -127,6 +128,7 @@ mei_hdcp_verify_receiver_cert_prepare_km(struct device *dev,
>>> verify_rxcert_in.port.integrated_port_type = data->port_type;
>>> verify_rxcert_in.port.physical_port = (u8)data->fw_ddi;
>>> + verify_rxcert_in.port.attached_transcoder = (u8)data->fw_tc;
>>> verify_rxcert_in.cert_rx = rx_cert->cert_rx;
>>> memcpy(verify_rxcert_in.r_rx, &rx_cert->r_rx, HDCP_2_2_RRX_LEN);
>>> @@ -197,6 +199,7 @@ mei_hdcp_verify_hprime(struct device *dev, struct hdcp_port_data *data,
>>> send_hprime_in.port.integrated_port_type = data->port_type;
>>> send_hprime_in.port.physical_port = (u8)data->fw_ddi;
>>> + send_hprime_in.port.attached_transcoder = (u8)data->fw_tc;
>>> memcpy(send_hprime_in.h_prime, rx_hprime->h_prime,
>>> HDCP_2_2_H_PRIME_LEN);
>>> @@ -254,6 +257,7 @@ mei_hdcp_store_pairing_info(struct device *dev, struct hdcp_port_data *data,
>>> pairing_info_in.port.integrated_port_type = data->port_type;
>>> pairing_info_in.port.physical_port = (u8)data->fw_ddi;
>>> + pairing_info_in.port.attached_transcoder = (u8)data->fw_tc;
>>> memcpy(pairing_info_in.e_kh_km, pairing_info->e_kh_km,
>>> HDCP_2_2_E_KH_KM_LEN);
>>> @@ -312,6 +316,7 @@ mei_hdcp_initiate_locality_check(struct device *dev,
>>> lc_init_in.port.integrated_port_type = data->port_type;
>>> lc_init_in.port.physical_port = (u8)data->fw_ddi;
>>> + lc_init_in.port.attached_transcoder = (u8)data->fw_tc;
>>> byte = mei_cldev_send(cldev, (u8 *)&lc_init_in, sizeof(lc_init_in));
>>> if (byte < 0) {
>>> @@ -367,6 +372,7 @@ mei_hdcp_verify_lprime(struct device *dev, struct hdcp_port_data *data,
>>> verify_lprime_in.port.integrated_port_type = data->port_type;
>>> verify_lprime_in.port.physical_port = (u8)data->fw_ddi;
>>> + verify_lprime_in.port.attached_transcoder = (u8)data->fw_tc;
>>> memcpy(verify_lprime_in.l_prime, rx_lprime->l_prime,
>>> HDCP_2_2_L_PRIME_LEN);
>>> @@ -424,6 +430,7 @@ static int mei_hdcp_get_session_key(struct device *dev,
>>> get_skey_in.port.integrated_port_type = data->port_type;
>>> get_skey_in.port.physical_port = (u8)data->fw_ddi;
>>> + get_skey_in.port.attached_transcoder = (u8)data->fw_tc;
>>> byte = mei_cldev_send(cldev, (u8 *)&get_skey_in, sizeof(get_skey_in));
>>> if (byte < 0) {
>>> @@ -488,6 +495,7 @@ mei_hdcp_repeater_check_flow_prepare_ack(struct device *dev,
>>> verify_repeater_in.port.integrated_port_type = data->port_type;
>>> verify_repeater_in.port.physical_port = (u8)data->fw_ddi;
>>> + verify_repeater_in.port.attached_transcoder = (u8)data->fw_tc;
>>> memcpy(verify_repeater_in.rx_info, rep_topology->rx_info,
>>> HDCP_2_2_RXINFO_LEN);
>>> @@ -558,6 +566,7 @@ static int mei_hdcp_verify_mprime(struct device *dev,
>>> verify_mprime_in.port.integrated_port_type = data->port_type;
>>> verify_mprime_in.port.physical_port = (u8)data->fw_ddi;
>>> + verify_mprime_in.port.attached_transcoder = (u8)data->fw_tc;
>>> memcpy(verify_mprime_in.m_prime, stream_ready->m_prime,
>>> HDCP_2_2_MPRIME_LEN);
>>> @@ -619,6 +628,7 @@ static int mei_hdcp_enable_authentication(struct device *dev,
>>> enable_auth_in.port.integrated_port_type = data->port_type;
>>> enable_auth_in.port.physical_port = (u8)data->fw_ddi;
>>> + enable_auth_in.port.attached_transcoder = (u8)data->fw_tc;
>>> enable_auth_in.stream_type = data->streams[0].stream_type;
>>> byte = mei_cldev_send(cldev, (u8 *)&enable_auth_in,
>>> @@ -673,6 +683,7 @@ mei_hdcp_close_session(struct device *dev, struct hdcp_port_data *data)
>>> session_close_in.port.integrated_port_type = data->port_type;
>>> session_close_in.port.physical_port = (u8)data->fw_ddi;
>>> + session_close_in.port.attached_transcoder = (u8)data->fw_tc;
>>> byte = mei_cldev_send(cldev, (u8 *)&session_close_in,
>>> sizeof(session_close_in));
>>> diff --git a/drivers/misc/mei/hdcp/mei_hdcp.h b/drivers/misc/mei/hdcp/mei_hdcp.h
>>> index e60282eb2d48..58e439d2fc1a 100644
>>> --- a/drivers/misc/mei/hdcp/mei_hdcp.h
>>> +++ b/drivers/misc/mei/hdcp/mei_hdcp.h
>>> @@ -184,8 +184,10 @@ struct hdcp_cmd_no_data {
>>> /* Uniquely identifies the hdcp port being addressed for a given command. */
>>> struct hdcp_port_id {
>>> u8 integrated_port_type;
>>> + /* Used until Gen11.5. Must be zero for Gen11.5+ */
>>> u8 physical_port;
>>> - u16 reserved;
>>> + u8 attached_transcoder;
>>> + u8 reserved;
>>> } __packed;
>>> /*
More information about the dri-devel
mailing list