[PATCH] drm/bridge: tc358767: Expose test mode functionality via debugfs
Andrey Smirnov
andrew.smirnov at gmail.com
Tue Aug 27 04:24:57 UTC 2019
On Mon, Aug 26, 2019 at 3:08 PM Laurent Pinchart
<laurent.pinchart at ideasonboard.com> wrote:
>
> Hi Andrey,
>
> Thank you for the patch.
>
> On Mon, Aug 26, 2019 at 11:25:24AM -0700, Andrey Smirnov wrote:
> > Presently, the driver code artificially limits test pattern mode to a
> > single pattern with fixed color selection. It being a kernel module
> > parameter makes switching "test patter" <-> "proper output" modes
> > on-the-fly clunky and outright impossible if the driver is built into
> > the kernel.
> >
> > To improve the situation a bit, convert current test pattern code to
> > use debugfs instead by exposing "TestCtl" register. This way old
> > "tc_test_pattern=1" functionality can be emulated via:
> >
> > echo -n 0x78146312 > tstctl
> >
> > and switch back to regular mode can be done with:
> >
> > echo -n 0x78146310 > tstctl
>
> Can't we make this more userfriendly by exposing either a test pattern
> index, or a string ?
We could, but then a) it would require more code in the driver b) the
files wouldn't correspond directly to something described in the
part's datasheet. Just didn't seem worth it to me.
> Do all bits in the register need to be controlled
> from userspace ?
Pretty much, yes. It's formatted as RR_GG_BB_X_M, where R, G, B
specifies color used for various patterns, X is irrelevant and M
specifies test pattern to use.
>
> > Note that switching to any of the test patterns, will NOT trigger link
> > re-establishment whereas switching to normal operation WILL. This is
> > done so:
> >
> > a) we can isolate and verify (e)DP link functionality by switching to
> > one of the test patters
> >
> > b) trigger a link re-establishment by switching back to normal mode
> >
> > Signed-off-by: Andrey Smirnov <andrew.smirnov at gmail.com>
> > Cc: Andrzej Hajda <a.hajda at samsung.com>
> > Cc: Laurent Pinchart <Laurent.pinchart at ideasonboard.com>
> > Cc: Tomi Valkeinen <tomi.valkeinen at ti.com>
> > Cc: Cory Tusar <cory.tusar at zii.aero>
> > Cc: Chris Healy <cphealy at gmail.com>
> > Cc: Lucas Stach <l.stach at pengutronix.de>
> > Cc: dri-devel at lists.freedesktop.org
> > Cc: linux-kernel at vger.kernel.org
> > ---
> > drivers/gpu/drm/bridge/tc358767.c | 137 ++++++++++++++++++++++--------
> > 1 file changed, 101 insertions(+), 36 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c
> > index 6308d93ad91d..7a795b613ed0 100644
> > --- a/drivers/gpu/drm/bridge/tc358767.c
> > +++ b/drivers/gpu/drm/bridge/tc358767.c
> > @@ -17,6 +17,7 @@
> >
> > #include <linux/bitfield.h>
> > #include <linux/clk.h>
> > +#include <linux/debugfs.h>
> > #include <linux/device.h>
> > #include <linux/gpio/consumer.h>
> > #include <linux/i2c.h>
> > @@ -222,11 +223,10 @@
> > #define COLOR_B GENMASK(15, 8)
> > #define ENI2CFILTER BIT(4)
> > #define COLOR_BAR_MODE GENMASK(1, 0)
> > +#define COLOR_BAR_MODE_NORMAL 0
> > #define COLOR_BAR_MODE_BARS 2
> > -#define PLL_DBG 0x0a04
> >
> > -static bool tc_test_pattern;
> > -module_param_named(test, tc_test_pattern, bool, 0644);
>
> I assume that his being a debug feature there's no system relying on the
> module parameter that would break if you remove it ?
>
Yeah, I don't know of any system that needs that parameter. It seems
pretty useless for anything but basic debugging.
> > +#define PLL_DBG 0x0a04
> >
> > struct tc_edp_link {
> > struct drm_dp_link base;
> > @@ -789,16 +789,6 @@ static int tc_set_video_mode(struct tc_data *tc,
> > if (ret)
> > return ret;
> >
> > - /* Test pattern settings */
> > - ret = regmap_write(tc->regmap, TSTCTL,
> > - FIELD_PREP(COLOR_R, 120) |
> > - FIELD_PREP(COLOR_G, 20) |
> > - FIELD_PREP(COLOR_B, 99) |
> > - ENI2CFILTER |
> > - FIELD_PREP(COLOR_BAR_MODE, COLOR_BAR_MODE_BARS));
> > - if (ret)
> > - return ret;
> > -
> > /* DP Main Stream Attributes */
> > vid_sync_dly = hsync_len + left_margin + mode->hdisplay;
> > ret = regmap_write(tc->regmap, DP0_VIDSYNCDELAY,
> > @@ -1150,14 +1140,6 @@ static int tc_stream_enable(struct tc_data *tc)
> >
> > dev_dbg(tc->dev, "enable video stream\n");
> >
> > - /* PXL PLL setup */
> > - if (tc_test_pattern) {
> > - ret = tc_pxl_pll_en(tc, clk_get_rate(tc->refclk),
> > - 1000 * tc->mode.clock);
> > - if (ret)
> > - return ret;
> > - }
> > -
> > ret = tc_set_video_mode(tc, &tc->mode);
> > if (ret)
> > return ret;
> > @@ -1186,12 +1168,8 @@ static int tc_stream_enable(struct tc_data *tc)
> > if (ret)
> > return ret;
> > /* Set input interface */
> > - value = DP0_AUDSRC_NO_INPUT;
> > - if (tc_test_pattern)
> > - value |= DP0_VIDSRC_COLOR_BAR;
> > - else
> > - value |= DP0_VIDSRC_DPI_RX;
> > - ret = regmap_write(tc->regmap, SYSCTRL, value);
> > + ret = regmap_write(tc->regmap, SYSCTRL,
> > + DP0_AUDSRC_NO_INPUT | DP0_VIDSRC_DPI_RX);
> > if (ret)
> > return ret;
> >
> > @@ -1220,39 +1198,44 @@ static void tc_bridge_pre_enable(struct drm_bridge *bridge)
> > drm_panel_prepare(tc->panel);
> > }
> >
> > -static void tc_bridge_enable(struct drm_bridge *bridge)
> > +static int __tc_bridge_enable(struct tc_data *tc)
> > {
> > - struct tc_data *tc = bridge_to_tc(bridge);
> > int ret;
> >
> > ret = tc_get_display_props(tc);
> > if (ret < 0) {
> > dev_err(tc->dev, "failed to read display props: %d\n", ret);
> > - return;
> > + return ret;
> > }
> >
> > ret = tc_main_link_enable(tc);
> > if (ret < 0) {
> > dev_err(tc->dev, "main link enable error: %d\n", ret);
> > - return;
> > + return ret;
> > }
> >
> > ret = tc_stream_enable(tc);
> > if (ret < 0) {
> > dev_err(tc->dev, "main link stream start error: %d\n", ret);
> > tc_main_link_disable(tc);
> > - return;
> > }
> >
> > - drm_panel_enable(tc->panel);
> > + return ret;
> > }
> >
> > -static void tc_bridge_disable(struct drm_bridge *bridge)
> > +static void tc_bridge_enable(struct drm_bridge *bridge)
> > {
> > struct tc_data *tc = bridge_to_tc(bridge);
> > - int ret;
> >
> > - drm_panel_disable(tc->panel);
> > + if (__tc_bridge_enable(tc) < 0)
> > + return;
> > +
> > + drm_panel_enable(tc->panel);
> > +}
> > +
> > +static int __tc_bridge_disable(struct tc_data *tc)
> > +{
> > + int ret;
> >
> > ret = tc_stream_disable(tc);
> > if (ret < 0)
> > @@ -1261,6 +1244,16 @@ static void tc_bridge_disable(struct drm_bridge *bridge)
> > ret = tc_main_link_disable(tc);
> > if (ret < 0)
> > dev_err(tc->dev, "main link disable error: %d\n", ret);
> > +
> > + return ret;
> > +}
> > +
> > +static void tc_bridge_disable(struct drm_bridge *bridge)
> > +{
> > + struct tc_data *tc = bridge_to_tc(bridge);
> > +
> > + drm_panel_disable(tc->panel);
> > + __tc_bridge_disable(tc);
> > }
> >
> > static void tc_bridge_post_disable(struct drm_bridge *bridge)
> > @@ -1372,6 +1365,77 @@ static enum drm_connector_status tc_connector_detect(struct drm_connector *conne
> > return connector_status_disconnected;
> > }
> >
> > +static int tc_tstctl_set(void *data, u64 val)
> > +{
> > + struct tc_data *tc = data;
> > + int ret;
> > +
> > + if (FIELD_GET(COLOR_BAR_MODE, val) == COLOR_BAR_MODE_NORMAL) {
> > + ret = regmap_write(tc->regmap, SYSCTRL, DP0_VIDSRC_DPI_RX);
> > + if (ret) {
> > + dev_err(tc->dev,
> > + "failed to select dpi video stream\n");
> > + return ret;
> > + }
> > +
> > + ret = regmap_write(tc->regmap, TSTCTL, val | ENI2CFILTER);
> > + if (ret) {
> > + dev_err(tc->dev, "failed to set TSTCTL\n");
> > + return ret;
> > + }
> > +
> > + ret = tc_pxl_pll_dis(tc);
> > + if (ret) {
> > + dev_err(tc->dev, "failed to disable PLL\n");
> > + return ret;
> > + }
> > +
> > + /*
> > + * Re-establish DP link
> > + */
> > + ret = __tc_bridge_disable(tc);
> > + if (ret)
> > + return ret;
> > +
> > + ret = __tc_bridge_enable(tc);
> > + if (ret)
> > + return ret;
>
> If the bridge is currently disabled you should not enable it. I think
> you need to guard against race conditions with the enable/disable
> functions, as well as delay writes until the bridge gets enabled if it
> is currently disabled.
>
OK, will do in v2.
> > + } else {
> > + ret = tc_pxl_pll_en(tc, clk_get_rate(tc->refclk),
> > + 1000 * tc->mode.clock);
> > + if (ret) {
> > + dev_err(tc->dev, "failed to enable PLL\n");
> > + return ret;
> > + }
> > +
> > + ret = regmap_write(tc->regmap, TSTCTL, val | ENI2CFILTER);
> > + if (ret) {
> > + dev_err(tc->dev, "failed to set TSTCTL\n");
> > + return ret;
> > + }
> > +
> > + ret = regmap_write(tc->regmap, SYSCTRL, DP0_VIDSRC_COLOR_BAR);
> > + if (ret) {
> > + dev_err(tc->dev, "failed to color bar video stream\n");
> > + return ret;
> > + }
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +DEFINE_SIMPLE_ATTRIBUTE(tc_tstctl_fops, NULL, tc_tstctl_set, "%llu\n");
>
> Shouldn't you also provide a get handler ?
There really isn't a use-case for reading the value of TestCtl AFAICT,
so, I skipped it to avoid having extra code.
>
> > +static int tc_late_register(struct drm_connector *connector)
> > +{
> > + if (connector->debugfs_entry)
> > + debugfs_create_file_unsafe("tstctl", 0644,
> > + connector->debugfs_entry,
> > + connector_to_tc(connector),
> > + &tc_tstctl_fops);
> > + return 0;
> > +}
>
> Why a .late_register() handler, can't you do this at probe time ?
>
.late_register() happens after drm_debugfs_connector_add() where
connector->debugfs_entry gets initialized. AFAICT, I could move that
code to probe, but then I'd have create a separate debugfs root
directory as well as add code to clean it up (currently I rely on
drm_debugfs_connector_remove() removing everything recursively.
Thanks,
Andrey Smirnov
More information about the dri-devel
mailing list