[PATCH v2 17/21] drm/imx: pd: Use bus format/flags provided by the bridge when available
Philipp Zabel
p.zabel at pengutronix.de
Tue Aug 27 08:15:19 UTC 2019
Hi Boris,
On Mon, 2019-08-26 at 17:26 +0200, Boris Brezillon wrote:
> Now that bridges can expose the bus format/flags they expect, we can
> use those instead of the relying on the display_info provided by the
> connector (which is only valid if the encoder is directly connected
> to bridge element driving the panel/display).
>
> We also explicitly expose the bus formats supported by our encoder by
> filling encoder->output_bus_caps with proper info.
>
> Signed-off-by: Boris Brezillon <boris.brezillon at collabora.com>
> ---
> Changes in v2:
> * Adjust things to match the new bus-format negotiation infra
> ---
> drivers/gpu/drm/imx/parallel-display.c | 136 ++++++++++++++++++++++---
> 1 file changed, 120 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/gpu/drm/imx/parallel-display.c b/drivers/gpu/drm/imx/parallel-display.c
> index 35518e5de356..df47cb74759f 100644
> --- a/drivers/gpu/drm/imx/parallel-display.c
> +++ b/drivers/gpu/drm/imx/parallel-display.c
> @@ -89,37 +89,139 @@ static struct drm_encoder *imx_pd_connector_best_encoder(
> return &imxpd->encoder;
> }
>
> -static void imx_pd_encoder_enable(struct drm_encoder *encoder)
> +static void imx_pd_bridge_enable(struct drm_bridge *bridge)
> {
> + struct drm_encoder *encoder = bridge_to_encoder(bridge);
> struct imx_parallel_display *imxpd = enc_to_imxpd(encoder);
>
> drm_panel_prepare(imxpd->panel);
> drm_panel_enable(imxpd->panel);
> }
>
> -static void imx_pd_encoder_disable(struct drm_encoder *encoder)
> +static void imx_pd_bridge_disable(struct drm_bridge *bridge)
> {
> + struct drm_encoder *encoder = bridge_to_encoder(bridge);
> struct imx_parallel_display *imxpd = enc_to_imxpd(encoder);
>
> drm_panel_disable(imxpd->panel);
> drm_panel_unprepare(imxpd->panel);
> }
>
> -static int imx_pd_encoder_atomic_check(struct drm_encoder *encoder,
> - struct drm_crtc_state *crtc_state,
> - struct drm_connector_state *conn_state)
> +static const u32 imx_pd_bus_fmts[] = {
> + MEDIA_BUS_FMT_RGB888_1X24,
> + MEDIA_BUS_FMT_RGB565_1X16,
> + MEDIA_BUS_FMT_RGB666_1X18,
> + MEDIA_BUS_FMT_RGB666_1X24_CPADHI,
ipu-dc.c also supports MEDIA_BUS_FMT_BGR888_1X24.
> +};
> +
> +static void
> +imx_pd_bridge_atomic_get_output_bus_fmts(struct drm_bridge *bridge,
> + struct drm_bridge_state *bridge_state,
> + struct drm_crtc_state *crtc_state,
> + struct drm_connector_state *conn_state,
> + unsigned int *num_output_fmts,
> + u32 *output_fmts)
> {
> + struct drm_display_info *di = &conn_state->connector->display_info;
> + struct drm_encoder *encoder = bridge_to_encoder(bridge);
> + struct imx_parallel_display *imxpd = enc_to_imxpd(encoder);
> +
> + *num_output_fmts = 1;
> + if (imxpd->bus_format) {
> + if (output_fmts)
> + output_fmts[0] = imxpd->bus_format;
This is the legacy DT configured interface-pix-fmt. Maybe this should be
moved to the last place.
> + } else if (di->num_bus_formats) {
> + *num_output_fmts = 1;
num_output_fmts is already set to one above.
> + if (output_fmts)
> + output_fmts[0] = di->bus_formats[0];
> + } else {
> + *num_output_fmts = ARRAY_SIZE(imx_pd_bus_fmts);
> + if (output_fmts)
> + memcpy(output_fmts, imx_pd_bus_fmts,
> + ARRAY_SIZE(imx_pd_bus_fmts));
> + }
> +}
> +
> +static void
> +imx_pd_bridge_atomic_get_input_bus_fmts(struct drm_bridge *bridge,
> + struct drm_bridge_state *bridge_state,
> + struct drm_crtc_state *crtc_state,
> + struct drm_connector_state *conn_state,
> + u32 output_fmt,
> + unsigned int *num_input_fmts,
> + u32 *input_fmts)
> +{
> + struct drm_encoder *encoder = bridge_to_encoder(bridge);
> + struct imx_parallel_display *imxpd = enc_to_imxpd(encoder);
> +
> + *num_input_fmts = 0;
> + if (output_fmt == MEDIA_BUS_FMT_FIXED) {
> + *num_input_fmts = 1;
I don't understand this. The bus format stored in imx_crtc_state by
atomic_check is used to configure the DC later. This should never be
MEDIA_BUS_FMT_FIXED, that would trigger a WARN_ON in
ipu_bus_format_to_map().
> + } else if (!imxpd->bus_format) {
> + unsigned int i;
> +
> + for (i = 0; i < ARRAY_SIZE(imx_pd_bus_fmts); i++) {
> + if (imx_pd_bus_fmts[i] == output_fmt) {
> + *num_input_fmts = 1;
> + break;
> + }
> + }
> + } else if (imxpd->bus_format == output_fmt) {
> + *num_input_fmts = 1;
> + }
> +
> + if (*num_input_fmts && input_fmts)
> + input_fmts[0] = MEDIA_BUS_FMT_FIXED;
The parallel-display driver basically represents the wiring, pinmux, and
drivers between the IPU DI and the DISP pads. The input format should
always be identical to the output format.
> +}
> +
> +static int imx_pd_bridge_atomic_check(struct drm_bridge *bridge,
> + struct drm_bridge_state *bridge_state,
> + struct drm_crtc_state *crtc_state,
> + struct drm_connector_state *conn_state)
> +{
> + struct drm_encoder *encoder = bridge_to_encoder(bridge);
> struct imx_crtc_state *imx_crtc_state = to_imx_crtc_state(crtc_state);
> struct drm_display_info *di = &conn_state->connector->display_info;
> struct imx_parallel_display *imxpd = enc_to_imxpd(encoder);
> + struct drm_bridge_state *next_bridge_state = NULL;
> + struct drm_bridge *next_bridge;
> + u32 bus_flags, bus_fmt;
> + unsigned int i;
>
> - if (!imxpd->bus_format && di->num_bus_formats) {
> - imx_crtc_state->bus_flags = di->bus_flags;
> - imx_crtc_state->bus_format = di->bus_formats[0];
> - } else {
> - imx_crtc_state->bus_flags = imxpd->bus_flags;
> - imx_crtc_state->bus_format = imxpd->bus_format;
> + next_bridge = drm_bridge_chain_get_next_bridge(bridge);
> + if (next_bridge)
> + next_bridge_state = drm_atomic_get_new_bridge_state(crtc_state->state,
> + next_bridge);
> +
> + bus_fmt = bridge_state->output_bus_cfg.fmt;
> + if (bus_fmt == MEDIA_BUS_FMT_FIXED)
> + bus_fmt = 0;
I would expect this to return with -EINVAL if bridge_state-
>output_bus_cfg.fmt is not in the list of supported formats.
> +
> + if (next_bridge_state)
> + bus_flags = next_bridge_state->input_bus_cfg.flags;
> + else if (!imxpd->bus_format && di->num_bus_formats)
> + bus_flags = di->bus_flags;
> + else
> + bus_flags = imxpd->bus_flags;
> +
> + for (i = 0; bus_fmt && i < ARRAY_SIZE(imx_pd_bus_fmts); i++) {
> + if (imx_pd_bus_fmts[i] == bridge_state->output_bus_cfg.fmt)
> + break;
> }
> +
> + if (i == ARRAY_SIZE(imx_pd_bus_fmts))
> + return -EINVAL;
> +
> + if (bus_flags &
> + ~(DRM_BUS_FLAG_DE_LOW | DRM_BUS_FLAG_DE_HIGH |
> + DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE |
> + DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE))
> + return -EINVAL;
This could allow DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE/NEGEDGE as well, if
they are not opposite to PIXDATA_DRIVE.
> + bridge_state->output_bus_cfg.flags = bus_flags;
> + bridge_state->input_bus_cfg.flags = bus_flags;
> + imx_crtc_state->bus_flags = bus_flags;
> + imx_crtc_state->bus_format = bridge_state->output_bus_cfg.fmt;
This should be the input bus format.
> imx_crtc_state->di_hsync_pin = 2;
> imx_crtc_state->di_vsync_pin = 3;
>
> @@ -143,10 +245,12 @@ static const struct drm_encoder_funcs imx_pd_encoder_funcs = {
> .destroy = imx_drm_encoder_destroy,
> };
>
> -static const struct drm_encoder_helper_funcs imx_pd_encoder_helper_funcs = {
> - .enable = imx_pd_encoder_enable,
> - .disable = imx_pd_encoder_disable,
> - .atomic_check = imx_pd_encoder_atomic_check,
> +static const struct drm_bridge_funcs imx_pd_bridge_funcs = {
> + .enable = imx_pd_bridge_enable,
> + .disable = imx_pd_bridge_disable,
> + .atomic_check = imx_pd_bridge_atomic_check,
> + .atomic_get_input_bus_fmts = imx_pd_bridge_atomic_get_input_bus_fmts,
> + .atomic_get_output_bus_fmts = imx_pd_bridge_atomic_get_output_bus_fmts,
> };
>
> static int imx_pd_register(struct drm_device *drm,
> @@ -166,7 +270,7 @@ static int imx_pd_register(struct drm_device *drm,
> */
> imxpd->connector.dpms = DRM_MODE_DPMS_OFF;
>
> - drm_encoder_helper_add(encoder, &imx_pd_encoder_helper_funcs);
> + encoder->bridge.funcs = &imx_pd_bridge_funcs;
> drm_encoder_init(drm, encoder, &imx_pd_encoder_funcs,
> DRM_MODE_ENCODER_NONE, NULL);
regards
Philipp
More information about the dri-devel
mailing list