[PATCH v11 4/6] misc/mei/hdcp: Fill transcoder index in port info
Winkler, Tomas
tomas.winkler at intel.com
Wed Aug 28 08:21:13 UTC 2019
>
> For gen12+ platform we need to pass the transcoder info as part of the port
> info into ME FW.
>
> This change fills the payload for ME FW from hdcp_port_data.
>
> v2:
> Doc is enhanced for physical_port and attached_transcoder [Tomas]
>
> Signed-off-by: Ramalingam C <ramalingam.c at intel.com>
> Acked-by: Jani Nikula <jani.nikula at intel.com>
> Reviewed-by: Shashank Sharma <shashank.sharma at intel.com>
Ack
> ---
> drivers/misc/mei/hdcp/mei_hdcp.c | 11 +++++++++++
> drivers/misc/mei/hdcp/mei_hdcp.h | 5 ++++-
> 2 files changed, 15 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/misc/mei/hdcp/mei_hdcp.c
> b/drivers/misc/mei/hdcp/mei_hdcp.c
> index 3638c77eba26..93027fd96c71 100644
> --- a/drivers/misc/mei/hdcp/mei_hdcp.c
> +++ b/drivers/misc/mei/hdcp/mei_hdcp.c
> @@ -58,6 +58,7 @@ mei_hdcp_initiate_session(struct device *dev, struct
> hdcp_port_data *data,
>
> session_init_in.port.integrated_port_type = data->port_type;
> session_init_in.port.physical_port = (u8)data->fw_ddi;
> + session_init_in.port.attached_transcoder = (u8)data->fw_tc;
> session_init_in.protocol = data->protocol;
>
> byte = mei_cldev_send(cldev, (u8 *)&session_init_in, @@ -127,6
> +128,7 @@ mei_hdcp_verify_receiver_cert_prepare_km(struct device *dev,
>
> verify_rxcert_in.port.integrated_port_type = data->port_type;
> verify_rxcert_in.port.physical_port = (u8)data->fw_ddi;
> + verify_rxcert_in.port.attached_transcoder = (u8)data->fw_tc;
>
> verify_rxcert_in.cert_rx = rx_cert->cert_rx;
> memcpy(verify_rxcert_in.r_rx, &rx_cert->r_rx, HDCP_2_2_RRX_LEN);
> @@ -197,6 +199,7 @@ mei_hdcp_verify_hprime(struct device *dev, struct
> hdcp_port_data *data,
>
> send_hprime_in.port.integrated_port_type = data->port_type;
> send_hprime_in.port.physical_port = (u8)data->fw_ddi;
> + send_hprime_in.port.attached_transcoder = (u8)data->fw_tc;
>
> memcpy(send_hprime_in.h_prime, rx_hprime->h_prime,
> HDCP_2_2_H_PRIME_LEN);
> @@ -254,6 +257,7 @@ mei_hdcp_store_pairing_info(struct device *dev, struct
> hdcp_port_data *data,
>
> pairing_info_in.port.integrated_port_type = data->port_type;
> pairing_info_in.port.physical_port = (u8)data->fw_ddi;
> + pairing_info_in.port.attached_transcoder = (u8)data->fw_tc;
>
> memcpy(pairing_info_in.e_kh_km, pairing_info->e_kh_km,
> HDCP_2_2_E_KH_KM_LEN);
> @@ -312,6 +316,7 @@ mei_hdcp_initiate_locality_check(struct device *dev,
>
> lc_init_in.port.integrated_port_type = data->port_type;
> lc_init_in.port.physical_port = (u8)data->fw_ddi;
> + lc_init_in.port.attached_transcoder = (u8)data->fw_tc;
>
> byte = mei_cldev_send(cldev, (u8 *)&lc_init_in, sizeof(lc_init_in));
> if (byte < 0) {
> @@ -367,6 +372,7 @@ mei_hdcp_verify_lprime(struct device *dev, struct
> hdcp_port_data *data,
>
> verify_lprime_in.port.integrated_port_type = data->port_type;
> verify_lprime_in.port.physical_port = (u8)data->fw_ddi;
> + verify_lprime_in.port.attached_transcoder = (u8)data->fw_tc;
>
> memcpy(verify_lprime_in.l_prime, rx_lprime->l_prime,
> HDCP_2_2_L_PRIME_LEN);
> @@ -424,6 +430,7 @@ static int mei_hdcp_get_session_key(struct device
> *dev,
>
> get_skey_in.port.integrated_port_type = data->port_type;
> get_skey_in.port.physical_port = (u8)data->fw_ddi;
> + get_skey_in.port.attached_transcoder = (u8)data->fw_tc;
>
> byte = mei_cldev_send(cldev, (u8 *)&get_skey_in, sizeof(get_skey_in));
> if (byte < 0) {
> @@ -488,6 +495,7 @@ mei_hdcp_repeater_check_flow_prepare_ack(struct
> device *dev,
>
> verify_repeater_in.port.integrated_port_type = data->port_type;
> verify_repeater_in.port.physical_port = (u8)data->fw_ddi;
> + verify_repeater_in.port.attached_transcoder = (u8)data->fw_tc;
>
> memcpy(verify_repeater_in.rx_info, rep_topology->rx_info,
> HDCP_2_2_RXINFO_LEN);
> @@ -558,6 +566,7 @@ static int mei_hdcp_verify_mprime(struct device *dev,
>
> verify_mprime_in.port.integrated_port_type = data->port_type;
> verify_mprime_in.port.physical_port = (u8)data->fw_ddi;
> + verify_mprime_in.port.attached_transcoder = (u8)data->fw_tc;
>
> memcpy(verify_mprime_in.m_prime, stream_ready->m_prime,
> HDCP_2_2_MPRIME_LEN);
> @@ -619,6 +628,7 @@ static int mei_hdcp_enable_authentication(struct
> device *dev,
>
> enable_auth_in.port.integrated_port_type = data->port_type;
> enable_auth_in.port.physical_port = (u8)data->fw_ddi;
> + enable_auth_in.port.attached_transcoder = (u8)data->fw_tc;
> enable_auth_in.stream_type = data->streams[0].stream_type;
>
> byte = mei_cldev_send(cldev, (u8 *)&enable_auth_in, @@ -673,6
> +683,7 @@ mei_hdcp_close_session(struct device *dev, struct hdcp_port_data
> *data)
>
> session_close_in.port.integrated_port_type = data->port_type;
> session_close_in.port.physical_port = (u8)data->fw_ddi;
> + session_close_in.port.attached_transcoder = (u8)data->fw_tc;
>
> byte = mei_cldev_send(cldev, (u8 *)&session_close_in,
> sizeof(session_close_in));
> diff --git a/drivers/misc/mei/hdcp/mei_hdcp.h
> b/drivers/misc/mei/hdcp/mei_hdcp.h
> index e60282eb2d48..18ffc773fa18 100644
> --- a/drivers/misc/mei/hdcp/mei_hdcp.h
> +++ b/drivers/misc/mei/hdcp/mei_hdcp.h
> @@ -184,8 +184,11 @@ struct hdcp_cmd_no_data {
> /* Uniquely identifies the hdcp port being addressed for a given command. */
> struct hdcp_port_id {
> u8 integrated_port_type;
> + /* physical_port is used until Gen11.5. Must be zero for Gen11.5+ */
> u8 physical_port;
> - u16 reserved;
> + /* attached_transcoder is for Gen11.5+. Set to zero for <Gen11.5 */
> + u8 attached_transcoder;
> + u8 reserved;
> } __packed;
>
> /*
> --
> 2.20.1
More information about the dri-devel
mailing list