[PATCH v3 1/8] dt-bindings: display: Add bindings for LVDS bus-timings

[Geert Uytterhoeven]

Hi Fabrizio,

On Wed, Aug 28, 2019 at 8:36 PM Fabrizio Castro
<fabrizio.castro at bp.renesas.com> wrote:
> Dual-LVDS connections need markers in the DT, this patch adds
> some common documentation to be referenced by both panels and
> bridges.
>
> Signed-off-by: Fabrizio Castro <fabrizio.castro at bp.renesas.com>

Thanks for your patch!

> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bus-timings/lvds.yaml
> @@ -0,0 +1,38 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/bus-timings/lvds.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Common Properties for bus timings of LVDS interfaces
> +
> +maintainers:
> +  - Thierry Reding <thierry.reding at gmail.com>
> +  - Fabrizio Castro <fabrizio.castro at bp.renesas.com>
> +
> +description: |
> +  This document defines device tree properties common to LVDS and dual-LVDS
> +  interfaces, where a dual-LVDS interface is a dual-link connection with even
> +  pixels traveling on one connection, and with odd pixels traveling on the other
> +  connection.
> +  This document doesn't constitue a device tree binding specification by itself
> +  but is meant to be referenced by device tree bindings.
> +  When referenced from panel or bridge device tree bindings, the properties
> +  defined in this document are defined as follows. The panel and bridge device
> +  tree bindings are responsible for defining whether each property is required
> +  or optional.
> +
> +properties:
> +  dual-lvds-even-pixels:
> +    type: boolean
> +    description:
> +      This property is specific to an input port of a sink device. When
> +      specified, it marks the port as recipient of even-pixels.
> +
> +  dual-lvds-odd-pixels:
> +    type: boolean
> +    description:
> +      This property is specific to an input port of a sink device. When
> +      specified, it marks the port as recipient of odd-pixels.

Do you need the "dual-" prefix? Isn't that implied by even/odd?
Or is it better to keep it, for readability?

I'm also thinking about a possible future extension to triple or quad LVDS.
As I'm not aware of English word equivalents of even/odd for triple/quad,
perhaps this should be specified using a numerical value instead?

If I go too far, please just say so ;-)

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds