[PATCH 2/2] arm64: dts: renesas: Add HiHope RZ/G2M board with idk-1110wr display

[Geert Uytterhoeven]

Hi Fabrizio,

On Thu, Aug 29, 2019 at 12:22 PM Fabrizio Castro
<fabrizio.castro at bp.renesas.com> wrote:
> The HiHope RZ/G2M is advertised as compatible with panel idk-1110wr
> from Advantech, however the panel isn't sold alongside the board.
> A new dts, adding everything that's required to get the panel to
> work the HiHope RZ/G2M, is the most convenient way to support the
> HiHope RZ/G2M when it's connected to the idk-1110wr.
>
> Signed-off-by: Fabrizio Castro <fabrizio.castro at bp.renesas.com>

Thanks for your patch!

> --- /dev/null
> +++ b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex-idk-1110wr.dts

> +&gpio1 {
> +       /*
> +        * When GP1_20 is LOW LVDS0 is connected to the LVDS connector
> +        * When GP1_20 is HIGH LVDS0 is connected to the LT8918L
> +        */
> +       lvds-connector-en-gpio{

Missing space before curly brace.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds