[PATCH v5, 12/32] drm/mediatek: add mmsys private data for ddp path config

[CK Hu]

Hi, Yongqiang:

On Thu, 2019-08-29 at 22:50 +0800, yongqiang.niu at mediatek.com wrote:
> From: Yongqiang Niu <yongqiang.niu at mediatek.com>
> 
> This patch add mmsys private data for ddp path config
> all these register offset and value will be different in future SOC
> add these define into mmsys private data
> 	u32 ovl0_mout_en;
> 	u32 rdma1_sout_sel_in;
> 	u32 rdma1_sout_dsi0;
> 	u32 dpi0_sel_in;
> 	u32 dpi0_sel_in_rdma1;
> 	u32 dsi0_sel_in;
> 	u32 dsi0_sel_in_rdma1;
> 
> Signed-off-by: Yongqiang Niu <yongqiang.niu at mediatek.com>
> ---
>  drivers/gpu/drm/mediatek/mtk_drm_crtc.c |  4 ++
>  drivers/gpu/drm/mediatek/mtk_drm_ddp.c  | 86 +++++++++++++++++++++++----------
>  drivers/gpu/drm/mediatek/mtk_drm_ddp.h  |  5 ++
>  drivers/gpu/drm/mediatek/mtk_drm_drv.c  |  3 ++
>  drivers/gpu/drm/mediatek/mtk_drm_drv.h  |  3 ++
>  5 files changed, 76 insertions(+), 25 deletions(-)
> 

[snip]

>  
>  void mtk_ddp_add_comp_to_path(void __iomem *config_regs,
> +			      const struct mtk_mmsys_reg_data *reg_data,
>  			      enum mtk_ddp_comp_id cur,
>  			      enum mtk_ddp_comp_id next)
>  {
>  	unsigned int addr, value, reg;
>  
> -	value = mtk_ddp_mout_en(cur, next, &addr);
> +	value = mtk_ddp_mout_en(reg_data, cur, next, &addr);
>  	if (value) {
>  		reg = readl_relaxed(config_regs + addr) | value;
>  		writel_relaxed(reg, config_regs + addr);
>  	}
>  
> -	mtk_ddp_sout_sel(config_regs, cur, next);
> +	value = mtk_ddp_sout_sel(reg_data, cur, next, &addr);
> +	if (value)
> +		writel_relaxed(value, config_regs + addr);

I think the register could be written inside mtk_ddp_sout_sel(), why do
you move out of that function?

Regards,
CK

>  
> -	value = mtk_ddp_sel_in(cur, next, &addr);
> +	value = mtk_ddp_sel_in(reg_data, cur, next, &addr);
>  	if (value) {
>  		reg = readl_relaxed(config_regs + addr) | value;
>  		writel_relaxed(reg, config_regs + addr);
> @@ -420,18 +455,19 @@ void mtk_ddp_add_comp_to_path(void __iomem *config_regs,
>  }
>  
>  
>