[PATCH v4, 12/33] drm/mediatek: split DISP_REG_CONFIG_DSI_SEL setting into another use case
Yongqiang Niu
yongqiang.niu at mediatek.com
Thu Aug 29 12:39:27 UTC 2019
On Wed, 2019-07-17 at 13:35 +0800, CK Hu wrote:
> Hi, Yongqiang:
>
> On Tue, 2019-07-09 at 06:33 +0800, yongqiang.niu at mediatek.com wrote:
> > From: Yongqiang Niu <yongqiang.niu at mediatek.com>
> >
> > Here is two modifition in this patch:
> > 1.bls->dpi0 and rdma1->dsi are differen usecase,
> > Split DISP_REG_CONFIG_DSI_SEL setting into anther usecase
> > 2.remove DISP_REG_CONFIG_DPI_SEL setting, DPI_SEL_IN_BLS is 0 and
> > this is same with hardware defautl setting,
> >
>
> You move 2 register setting out of the path from BLS to DPI0, does this
> path still work? Please make sure that all modification could work on
> all supported SoC.
>
> Regards,
> CK
>
DPI_SEL_IN_BLS is 0 and this is same with hardware default setting as
description in patch.
the removed sentence is useless.
> > Signed-off-by: Yongqiang Niu <yongqiang.niu at mediatek.com>
> > ---
> > drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 3 +--
> > 1 file changed, 1 insertion(+), 2 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> > index d015c1a..47b3e35 100644
> > --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> > +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> > @@ -400,10 +400,9 @@ static void mtk_ddp_sout_sel(void __iomem *config_regs,
> > } else if (cur == DDP_COMPONENT_BLS && next == DDP_COMPONENT_DPI0) {
> > writel_relaxed(BLS_TO_DPI_RDMA1_TO_DSI,
> > config_regs + DISP_REG_CONFIG_OUT_SEL);
> > + } else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DSI0) {
> > writel_relaxed(DSI_SEL_IN_RDMA,
> > config_regs + DISP_REG_CONFIG_DSI_SEL);
> > - writel_relaxed(DPI_SEL_IN_BLS,
> > - config_regs + DISP_REG_CONFIG_DPI_SEL);
> > }
> > }
> >
>
>
More information about the dri-devel
mailing list