[PATCH 2/2] arm64: dts: renesas: Add HiHope RZ/G2M board with idk-1110wr display

[Fabrizio Castro]

Hi Geert,

Thank you for your feedback!

> From: Geert Uytterhoeven <geert at linux-m68k.org>
> Sent: 29 August 2019 11:51
> Subject: Re: [PATCH 2/2] arm64: dts: renesas: Add HiHope RZ/G2M board with idk-1110wr display
> 
> Hi Fabrizio,
> 
> On Thu, Aug 29, 2019 at 12:22 PM Fabrizio Castro
> <fabrizio.castro at bp.renesas.com> wrote:
> > The HiHope RZ/G2M is advertised as compatible with panel idk-1110wr
> > from Advantech, however the panel isn't sold alongside the board.
> > A new dts, adding everything that's required to get the panel to
> > work the HiHope RZ/G2M, is the most convenient way to support the
> > HiHope RZ/G2M when it's connected to the idk-1110wr.
> >
> > Signed-off-by: Fabrizio Castro <fabrizio.castro at bp.renesas.com>
> 
> Thanks for your patch!
> 
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex-idk-1110wr.dts
> 
> > +&gpio1 {
> > +       /*
> > +        * When GP1_20 is LOW LVDS0 is connected to the LVDS connector
> > +        * When GP1_20 is HIGH LVDS0 is connected to the LT8918L
> > +        */
> > +       lvds-connector-en-gpio{
> 
> Missing space before curly brace.

Doh, thank you for spotting this, I'll send a v2.

Cheers,
Fab

> 
> Gr{oetje,eeting}s,
> 
>                         Geert
> 
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org
> 
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
>                                 -- Linus Torvalds