[PATCH v4 05/14] drm/mxsfb: Update register definitions using bit manipulation defines
Robert Chiras
robert.chiras at nxp.com
Thu Aug 29 11:30:06 UTC 2019
Use BIT(x) and GEN_MASK(h, l) for better representation the inside of
various registers.
Signed-off-by: Robert Chiras <robert.chiras at nxp.com>
Tested-by: Guido Günther <agx at sigxcpu.org>
---
drivers/gpu/drm/mxsfb/mxsfb_regs.h | 151 ++++++++++++++++++++++---------------
1 file changed, 89 insertions(+), 62 deletions(-)
diff --git a/drivers/gpu/drm/mxsfb/mxsfb_regs.h b/drivers/gpu/drm/mxsfb/mxsfb_regs.h
index 71426aa..9fcb1db 100644
--- a/drivers/gpu/drm/mxsfb/mxsfb_regs.h
+++ b/drivers/gpu/drm/mxsfb/mxsfb_regs.h
@@ -40,66 +40,93 @@
#define LCDC_AS_BUF 0x220
#define LCDC_AS_NEXT_BUF 0x230
-#define CTRL_SFTRST (1 << 31)
-#define CTRL_CLKGATE (1 << 30)
-#define CTRL_BYPASS_COUNT (1 << 19)
-#define CTRL_VSYNC_MODE (1 << 18)
-#define CTRL_DOTCLK_MODE (1 << 17)
-#define CTRL_DATA_SELECT (1 << 16)
-#define CTRL_SET_BUS_WIDTH(x) (((x) & 0x3) << 10)
-#define CTRL_GET_BUS_WIDTH(x) (((x) >> 10) & 0x3)
-#define CTRL_BUS_WIDTH_MASK (0x3 << 10)
-#define CTRL_SET_WORD_LENGTH(x) (((x) & 0x3) << 8)
-#define CTRL_GET_WORD_LENGTH(x) (((x) >> 8) & 0x3)
-#define CTRL_MASTER (1 << 5)
-#define CTRL_DF16 (1 << 3)
-#define CTRL_DF18 (1 << 2)
-#define CTRL_DF24 (1 << 1)
-#define CTRL_RUN (1 << 0)
-
-#define CTRL1_RECOVERY_ON_UNDERFLOW (1 << 24)
-#define CTRL1_FIFO_CLEAR (1 << 21)
-#define CTRL1_SET_BYTE_PACKAGING(x) (((x) & 0xf) << 16)
-#define CTRL1_GET_BYTE_PACKAGING(x) (((x) >> 16) & 0xf)
-#define CTRL1_CUR_FRAME_DONE_IRQ_EN (1 << 13)
-#define CTRL1_CUR_FRAME_DONE_IRQ (1 << 9)
-
-#define CTRL2_OUTSTANDING_REQS__REQ_16 (4 << 21)
-
-#define TRANSFER_COUNT_SET_VCOUNT(x) (((x) & 0xffff) << 16)
-#define TRANSFER_COUNT_GET_VCOUNT(x) (((x) >> 16) & 0xffff)
-#define TRANSFER_COUNT_SET_HCOUNT(x) ((x) & 0xffff)
-#define TRANSFER_COUNT_GET_HCOUNT(x) ((x) & 0xffff)
-
-#define VDCTRL0_ENABLE_PRESENT (1 << 28)
-#define VDCTRL0_VSYNC_ACT_HIGH (1 << 27)
-#define VDCTRL0_HSYNC_ACT_HIGH (1 << 26)
-#define VDCTRL0_DOTCLK_ACT_FALLING (1 << 25)
-#define VDCTRL0_ENABLE_ACT_HIGH (1 << 24)
-#define VDCTRL0_VSYNC_PERIOD_UNIT (1 << 21)
-#define VDCTRL0_VSYNC_PULSE_WIDTH_UNIT (1 << 20)
-#define VDCTRL0_HALF_LINE (1 << 19)
-#define VDCTRL0_HALF_LINE_MODE (1 << 18)
-#define VDCTRL0_SET_VSYNC_PULSE_WIDTH(x) ((x) & 0x3ffff)
-#define VDCTRL0_GET_VSYNC_PULSE_WIDTH(x) ((x) & 0x3ffff)
-
-#define VDCTRL2_SET_HSYNC_PERIOD(x) ((x) & 0x3ffff)
-#define VDCTRL2_GET_HSYNC_PERIOD(x) ((x) & 0x3ffff)
-
-#define VDCTRL3_MUX_SYNC_SIGNALS (1 << 29)
-#define VDCTRL3_VSYNC_ONLY (1 << 28)
-#define SET_HOR_WAIT_CNT(x) (((x) & 0xfff) << 16)
-#define GET_HOR_WAIT_CNT(x) (((x) >> 16) & 0xfff)
-#define SET_VERT_WAIT_CNT(x) ((x) & 0xffff)
-#define GET_VERT_WAIT_CNT(x) ((x) & 0xffff)
-
-#define VDCTRL4_SET_DOTCLK_DLY(x) (((x) & 0x7) << 29) /* v4 only */
-#define VDCTRL4_GET_DOTCLK_DLY(x) (((x) >> 29) & 0x7) /* v4 only */
-#define VDCTRL4_SYNC_SIGNALS_ON (1 << 18)
-#define SET_DOTCLK_H_VALID_DATA_CNT(x) ((x) & 0x3ffff)
-
-#define DEBUG0_HSYNC (1 < 26)
-#define DEBUG0_VSYNC (1 < 25)
+/* reg bit manipulation */
+#define REG_PUT(x, h, l) (((x) << (l)) & GENMASK(h, l))
+#define REG_GET(x, h, l) (((x) & GENMASK(h, l)) >> (l))
+
+#define CTRL_SFTRST BIT(31)
+#define CTRL_CLKGATE BIT(30)
+#define CTRL_SHIFT_DIR(x) REG_PUT((x), 26, 26)
+#define CTRL_SHIFT_NUM(x) REG_PUT((x), 25, 21)
+#define CTRL_BYPASS_COUNT BIT(19)
+#define CTRL_VSYNC_MODE BIT(18)
+#define CTRL_DOTCLK_MODE BIT(17)
+#define CTRL_DATA_SELECT BIT(16)
+#define CTRL_INPUT_SWIZZLE(x) REG_PUT((x), 15, 14)
+#define CTRL_CSC_SWIZZLE(x) REG_PUT((x), 13, 12)
+#define CTRL_SET_BUS_WIDTH(x) REG_PUT((x), 11, 10)
+#define CTRL_GET_BUS_WIDTH(x) REG_GET((x), 11, 10)
+#define CTRL_BUS_WIDTH_MASK REG_PUT((0x3), 11, 10)
+#define CTRL_SET_WORD_LENGTH(x) REG_PUT((x), 9, 8)
+#define CTRL_GET_WORD_LENGTH(x) REG_GET((x), 9, 8)
+#define CTRL_MASTER BIT(5)
+#define CTRL_DF16 BIT(3)
+#define CTRL_DF18 BIT(2)
+#define CTRL_DF24 BIT(1)
+#define CTRL_RUN BIT(0)
+
+#define CTRL1_RECOVERY_ON_UNDERFLOW BIT(24)
+#define CTRL1_FIFO_CLEAR BIT(21)
+
+/*
+ * BYTE_PACKAGING
+ *
+ * This bitfield is used to show which data bytes in a 32-bit word area valid.
+ * Default value 0xf indicates that all bytes are valid. For 8-bit transfers,
+ * any combination in this bitfield will mean valid data is present in the
+ * corresponding bytes. In the 16-bit mode, a 16-bit half-word is valid only if
+ * adjacent bits [1:0] or [3:2] or both are 1. A value of 0x0 will mean that
+ * none of the bytes are valid and should not be used. For example, set the bit
+ * field value to 0x7 if the display data is arranged in the 24-bit unpacked
+ * format (A-R-G-B where A value does not have be transmitted).
+ */
+#define CTRL1_SET_BYTE_PACKAGING(x) REG_PUT((x), 19, 16)
+#define CTRL1_GET_BYTE_PACKAGING(x) REG_GET((x), 19, 16)
+
+#define CTRL1_CUR_FRAME_DONE_IRQ_EN BIT(13)
+#define CTRL1_CUR_FRAME_DONE_IRQ BIT(9)
+
+#define CTRL2_OUTSTANDING_REQS(x) REG_PUT((x), 23, 21)
+#define REQ_1 0
+#define REQ_2 1
+#define REQ_4 2
+#define REQ_8 3
+#define REQ_16 4
+
+#define TRANSFER_COUNT_SET_VCOUNT(x) REG_PUT((x), 31, 16)
+#define TRANSFER_COUNT_GET_VCOUNT(x) REG_GET((x), 31, 16)
+#define TRANSFER_COUNT_SET_HCOUNT(x) REG_PUT((x), 15, 0)
+#define TRANSFER_COUNT_GET_HCOUNT(x) REG_GET((x), 15, 0)
+
+#define VDCTRL0_ENABLE_PRESENT BIT(28)
+#define VDCTRL0_VSYNC_ACT_HIGH BIT(27)
+#define VDCTRL0_HSYNC_ACT_HIGH BIT(26)
+#define VDCTRL0_DOTCLK_ACT_FALLING BIT(25)
+#define VDCTRL0_ENABLE_ACT_HIGH BIT(24)
+#define VDCTRL0_VSYNC_PERIOD_UNIT BIT(21)
+#define VDCTRL0_VSYNC_PULSE_WIDTH_UNIT BIT(20)
+#define VDCTRL0_HALF_LINE BIT(19)
+#define VDCTRL0_HALF_LINE_MODE BIT(18)
+#define VDCTRL0_SET_VSYNC_PULSE_WIDTH(x) REG_PUT((x), 17, 0)
+#define VDCTRL0_GET_VSYNC_PULSE_WIDTH(x) REG_GET((x), 17, 0)
+
+#define VDCTRL2_SET_HSYNC_PERIOD(x) REG_PUT((x), 15, 0)
+#define VDCTRL2_GET_HSYNC_PERIOD(x) REG_GET((x), 15, 0)
+
+#define VDCTRL3_MUX_SYNC_SIGNALS BIT(29)
+#define VDCTRL3_VSYNC_ONLY BIT(28)
+#define SET_HOR_WAIT_CNT(x) REG_PUT((x), 27, 16)
+#define GET_HOR_WAIT_CNT(x) REG_GET((x), 27, 16)
+#define SET_VERT_WAIT_CNT(x) REG_PUT((x), 15, 0)
+#define GET_VERT_WAIT_CNT(x) REG_GET((x), 15, 0)
+
+#define VDCTRL4_SET_DOTCLK_DLY(x) REG_PUT((x), 31, 29) /* v4 only */
+#define VDCTRL4_GET_DOTCLK_DLY(x) REG_GET((x), 31, 29) /* v4 only */
+#define VDCTRL4_SYNC_SIGNALS_ON BIT(18)
+#define SET_DOTCLK_H_VALID_DATA_CNT(x) REG_PUT((x), 17, 0)
+
+#define DEBUG0_HSYNC BIT(26)
+#define DEBUG0_VSYNC BIT(25)
#define MXSFB_MIN_XRES 120
#define MXSFB_MIN_YRES 120
@@ -116,7 +143,7 @@
#define STMLCDIF_18BIT 2 /* pixel data bus to the display is of 18 bit width */
#define STMLCDIF_24BIT 3 /* pixel data bus to the display is of 24 bit width */
-#define MXSFB_SYNC_DATA_ENABLE_HIGH_ACT (1 << 6)
-#define MXSFB_SYNC_DOTCLK_FALLING_ACT (1 << 7) /* negative edge sampling */
+#define MXSFB_SYNC_DATA_ENABLE_HIGH_ACT BIT(6)
+#define MXSFB_SYNC_DOTCLK_FALLING_ACT BIT(7) /* negative edge sampling */
#endif /* __MXSFB_REGS_H__ */
--
2.7.4
More information about the dri-devel
mailing list