[PATCH v1 14/16] drm/panel: call prepare/enable only once
Laurent Pinchart
laurent.pinchart at ideasonboard.com
Mon Dec 2 15:15:02 UTC 2019
Hi Sean,
On Mon, Aug 05, 2019 at 01:01:20PM -0400, Sean Paul wrote:
> On Sun, Aug 04, 2019 at 10:16:35PM +0200, Sam Ravnborg wrote:
> > Many panel drivers duplicate logic to prevent prepare to be called
> > for a panel that is already prepared.
> > Likewise for enable.
> >
> > Implement this logic in drm_panel so the individual drivers
> > no longer needs this.
> > A panel is considered prepared/enabled only if the prepare/enable call
> > succeeds.
> > For disable/unprepare it is unconditionally considered
> > disabled/unprepared.
>
> Hi Sam,
> I did a similar thing a few years ago [1]. IIRC it was well received and just
> needed some nits cleaned up. Unfortunately I lost interest^W^W switched to other
> things and dropped it. So thanks for picking this back up!
>
> Fast forward to today, I still think it's a good idea but I want to make sure
> this won't negatively interact with the self refresh helpers. With the helpers
> in place, it's possible to call disable consecutively (ie: once to enter self
> refresh and again to actually shut down). I did a quick pass and it looks like
> this patch might break that behavior, so you might want to take that into
> account.
Is this semantics documented somewhere ? The documentation of the panel
disable operation is pretty terse, and we need to explicitly state who
of the caller and callee needs to track the state.
> [1]- https://patchwork.freedesktop.org/series/30712/
>
> > This allows calls to prepare/enable again, even if there were
> > some issue disabling a regulator or similar during disable/unprepare.
> >
> > Signed-off-by: Sam Ravnborg <sam at ravnborg.org>
> > Cc: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
> > Cc: Maxime Ripard <maxime.ripard at bootlin.com>
> > Cc: Sean Paul <sean at poorly.run>
> > Cc: Thierry Reding <thierry.reding at gmail.com>
> > Cc: Sam Ravnborg <sam at ravnborg.org>
> > Cc: David Airlie <airlied at linux.ie>
> > Cc: Daniel Vetter <daniel at ffwll.ch>
> > ---
> > drivers/gpu/drm/drm_panel.c | 66 ++++++++++++++++++++++++++++++-------
> > include/drm/drm_panel.h | 21 ++++++++++++
> > 2 files changed, 75 insertions(+), 12 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/drm_panel.c b/drivers/gpu/drm/drm_panel.c
> > index da19d5b4a2f4..0853764040de 100644
> > --- a/drivers/gpu/drm/drm_panel.c
> > +++ b/drivers/gpu/drm/drm_panel.c
> > @@ -66,10 +66,21 @@ EXPORT_SYMBOL(drm_panel_init);
> > */
> > int drm_panel_prepare(struct drm_panel *panel)
> > {
> > - if (panel && panel->funcs && panel->funcs->prepare)
> > - return panel->funcs->prepare(panel);
> > + int ret = -ENOSYS;
> >
> > - return panel ? -ENOSYS : -EINVAL;
> > + if (!panel)
> > + return -EINVAL;
> > +
> > + if (panel->prepared)
> > + return 0;
> > +
> > + if (panel->funcs && panel->funcs->prepare)
> > + ret = panel->funcs->prepare(panel);
> > +
> > + if (ret >= 0)
> > + panel->prepared = true;
> > +
> > + return ret;
> > }
> > EXPORT_SYMBOL(drm_panel_prepare);
> >
> > @@ -85,10 +96,21 @@ EXPORT_SYMBOL(drm_panel_prepare);
> > */
> > int drm_panel_enable(struct drm_panel *panel)
> > {
> > - if (panel && panel->funcs && panel->funcs->enable)
> > - return panel->funcs->enable(panel);
> > + int ret = -ENOSYS;
> >
> > - return panel ? -ENOSYS : -EINVAL;
> > + if (!panel)
> > + return -EINVAL;
> > +
> > + if (panel->enabled)
> > + return 0;
> > +
> > + if (panel->funcs && panel->funcs->enable)
> > + ret = panel->funcs->enable(panel);
> > +
> > + if (ret >= 0)
> > + panel->enabled = true;
> > +
> > + return ret;
> > }
> > EXPORT_SYMBOL(drm_panel_enable);
> >
> > @@ -104,10 +126,20 @@ EXPORT_SYMBOL(drm_panel_enable);
> > */
> > int drm_panel_disable(struct drm_panel *panel)
> > {
> > - if (panel && panel->funcs && panel->funcs->disable)
> > - return panel->funcs->disable(panel);
> > + int ret = -ENOSYS;
> >
> > - return panel ? -ENOSYS : -EINVAL;
> > + if (!panel)
> > + return -EINVAL;
> > +
> > + if (!panel->enabled)
> > + return 0;
> > +
> > + if (panel->funcs && panel->funcs->disable)
> > + ret = panel->funcs->disable(panel);
> > +
> > + panel->enabled = false;
> > +
> > + return ret;
> > }
> > EXPORT_SYMBOL(drm_panel_disable);
> >
> > @@ -124,10 +156,20 @@ EXPORT_SYMBOL(drm_panel_disable);
> > */
> > int drm_panel_unprepare(struct drm_panel *panel)
> > {
> > - if (panel && panel->funcs && panel->funcs->unprepare)
> > - return panel->funcs->unprepare(panel);
> > + int ret = -ENOSYS;
> >
> > - return panel ? -ENOSYS : -EINVAL;
> > + if (!panel)
> > + return -EINVAL;
> > +
> > + if (!panel->prepared)
> > + return 0;
> > +
> > + if (panel->funcs && panel->funcs->unprepare)
> > + ret = panel->funcs->unprepare(panel);
> > +
> > + panel->prepared = false;
> > +
> > + return ret;
> > }
> > EXPORT_SYMBOL(drm_panel_unprepare);
> >
> > diff --git a/include/drm/drm_panel.h b/include/drm/drm_panel.h
> > index 624bd15ecfab..7493500fc9bd 100644
> > --- a/include/drm/drm_panel.h
> > +++ b/include/drm/drm_panel.h
> > @@ -65,6 +65,9 @@ struct drm_panel_funcs {
> > * @prepare:
> > *
> > * Turn on panel and perform set up.
> > + * When the panel is successfully prepared the prepare() function
> > + * will not be called again until the panel has been unprepared.
> > + *
> > */
> > int (*prepare)(struct drm_panel *panel);
> >
> > @@ -72,6 +75,8 @@ struct drm_panel_funcs {
> > * @enable:
> > *
> > * Enable panel (turn on back light, etc.).
> > + * When the panel is successfully enabled the enable() function
> > + * will not be called again until the panel has been disabled.
> > */
> > int (*enable)(struct drm_panel *panel);
> >
> > @@ -79,6 +84,7 @@ struct drm_panel_funcs {
> > * @disable:
> > *
> > * Disable panel (turn off back light, etc.).
> > + * If the panel is already disabled the disable() function is not called.
> > */
> > int (*disable)(struct drm_panel *panel);
> >
> > @@ -86,6 +92,7 @@ struct drm_panel_funcs {
> > * @unprepare:
> > *
> > * Turn off panel.
> > + * If the panel is already unprepared the unprepare() function is not called.
> > */
> > int (*unprepare)(struct drm_panel *panel);
> >
> > @@ -145,6 +152,20 @@ struct drm_panel {
> > * Panel entry in registry.
> > */
> > struct list_head list;
> > +
> > + /**
> > + * @prepared:
> > + *
> > + * Set to true when the panel is successfully prepared.
> > + */
> > + bool prepared;
> > +
> > + /**
> > + * @enabled:
> > + *
> > + * Set to true when the panel is successfully enabled.
> > + */
> > + bool enabled;
> > };
> >
> > void drm_panel_init(struct drm_panel *panel);
--
Regards,
Laurent Pinchart
More information about the dri-devel
mailing list