[PATCH v1 14/26] drm/panel: olimex-lcd-olinuxino: use drm_panel backlight support

Sam Ravnborg sam at ravnborg.org
Mon Dec 2 19:32:18 UTC 2019


Use the backlight support in drm_panel to simplify the driver

Signed-off-by: Sam Ravnborg <sam at ravnborg.org>
Cc: Stefan Mavrodiev <stefan at olimex.com>
Cc: Thierry Reding <thierry.reding at gmail.com>
Cc: Sam Ravnborg <sam at ravnborg.org>
---
 .../gpu/drm/panel/panel-olimex-lcd-olinuxino.c | 18 ++++++------------
 1 file changed, 6 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-olimex-lcd-olinuxino.c b/drivers/gpu/drm/panel/panel-olimex-lcd-olinuxino.c
index e553e584399b..09deb99981a4 100644
--- a/drivers/gpu/drm/panel/panel-olimex-lcd-olinuxino.c
+++ b/drivers/gpu/drm/panel/panel-olimex-lcd-olinuxino.c
@@ -6,7 +6,6 @@
  *   Author: Stefan Mavrodiev <stefan at olimex.com>
  */
 
-#include <linux/backlight.h>
 #include <linux/crc32.h>
 #include <linux/gpio/consumer.h>
 #include <linux/i2c.h>
@@ -68,7 +67,6 @@ struct lcd_olinuxino {
 	bool prepared;
 	bool enabled;
 
-	struct backlight_device *backlight;
 	struct regulator *supply;
 	struct gpio_desc *enable_gpio;
 
@@ -87,8 +85,6 @@ static int lcd_olinuxino_disable(struct drm_panel *panel)
 	if (!lcd->enabled)
 		return 0;
 
-	backlight_disable(lcd->backlight);
-
 	lcd->enabled = false;
 
 	return 0;
@@ -134,8 +130,6 @@ static int lcd_olinuxino_enable(struct drm_panel *panel)
 	if (lcd->enabled)
 		return 0;
 
-	backlight_enable(lcd->backlight);
-
 	lcd->enabled = true;
 
 	return 0;
@@ -283,13 +277,13 @@ static int lcd_olinuxino_probe(struct i2c_client *client,
 	if (IS_ERR(lcd->enable_gpio))
 		return PTR_ERR(lcd->enable_gpio);
 
-	lcd->backlight = devm_of_find_backlight(dev);
-	if (IS_ERR(lcd->backlight))
-		return PTR_ERR(lcd->backlight);
-
 	drm_panel_init(&lcd->panel, dev, &lcd_olinuxino_funcs,
 		       DRM_MODE_CONNECTOR_DPI);
 
+	ret = drm_panel_of_backlight(&lcd->panel);
+	if (ret)
+		return ret;
+
 	return drm_panel_add(&lcd->panel);
 }
 
@@ -299,8 +293,8 @@ static int lcd_olinuxino_remove(struct i2c_client *client)
 
 	drm_panel_remove(&panel->panel);
 
-	lcd_olinuxino_disable(&panel->panel);
-	lcd_olinuxino_unprepare(&panel->panel);
+	drm_panel_disable(&panel->panel);
+	drm_panel_unprepare(&panel->panel);
 
 	return 0;
 }
-- 
2.20.1



More information about the dri-devel mailing list