[PATCH v1 25/26] drm/panel: tpo-td028ttec1: use drm_panel backlight support

Laurent Pinchart laurent.pinchart at ideasonboard.com
Tue Dec 3 07:16:56 UTC 2019


Hi Sam,

Thank you for the patch.

On Mon, Dec 02, 2019 at 08:32:29PM +0100, Sam Ravnborg wrote:
> Use the backlight support in drm_panel to simplify the driver
> 
> Signed-off-by: Sam Ravnborg <sam at ravnborg.org>
> Cc: Thierry Reding <thierry.reding at gmail.com>
> Cc: Sam Ravnborg <sam at ravnborg.org>

Reviewed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>

> ---
>  drivers/gpu/drm/panel/panel-tpo-td028ttec1.c | 14 ++++----------
>  1 file changed, 4 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/gpu/drm/panel/panel-tpo-td028ttec1.c b/drivers/gpu/drm/panel/panel-tpo-td028ttec1.c
> index 37252590b541..cf29405a2dbe 100644
> --- a/drivers/gpu/drm/panel/panel-tpo-td028ttec1.c
> +++ b/drivers/gpu/drm/panel/panel-tpo-td028ttec1.c
> @@ -17,7 +17,6 @@
>   * H. Nikolaus Schaller <hns at goldelico.com>
>   */
>  
> -#include <linux/backlight.h>
>  #include <linux/delay.h>
>  #include <linux/module.h>
>  #include <linux/spi/spi.h>
> @@ -83,7 +82,6 @@ struct td028ttec1_panel {
>  	struct drm_panel panel;
>  
>  	struct spi_device *spi;
> -	struct backlight_device *backlight;
>  };
>  
>  #define to_td028ttec1_device(p) container_of(p, struct td028ttec1_panel, panel)
> @@ -243,8 +241,6 @@ static int td028ttec1_enable(struct drm_panel *panel)
>  	if (ret)
>  		return ret;
>  
> -	backlight_enable(lcd->backlight);
> -
>  	return 0;
>  }
>  
> @@ -252,8 +248,6 @@ static int td028ttec1_disable(struct drm_panel *panel)
>  {
>  	struct td028ttec1_panel *lcd = to_td028ttec1_device(panel);
>  
> -	backlight_disable(lcd->backlight);
> -
>  	jbt_ret_write_0(lcd, JBT_REG_DISPLAY_OFF, NULL);
>  
>  	return 0;
> @@ -334,10 +328,6 @@ static int td028ttec1_probe(struct spi_device *spi)
>  	spi_set_drvdata(spi, lcd);
>  	lcd->spi = spi;
>  
> -	lcd->backlight = devm_of_find_backlight(&spi->dev);
> -	if (IS_ERR(lcd->backlight))
> -		return PTR_ERR(lcd->backlight);
> -
>  	spi->mode = SPI_MODE_3;
>  	spi->bits_per_word = 9;
>  
> @@ -350,6 +340,10 @@ static int td028ttec1_probe(struct spi_device *spi)
>  	drm_panel_init(&lcd->panel, &lcd->spi->dev, &td028ttec1_funcs,
>  		       DRM_MODE_CONNECTOR_DPI);
>  
> +	ret = drm_panel_of_backlight(&lcd->panel);
> +	if (ret)
> +		return ret;
> +
>  	return drm_panel_add(&lcd->panel);
>  }
>  

-- 
Regards,

Laurent Pinchart


More information about the dri-devel mailing list