[PATCH libdrm v4] modetest: Use floating vrefresh while dumping mode

Eric Engestrom eric.engestrom at intel.com
Thu Dec 5 13:16:32 UTC 2019


On Tuesday, 2019-12-03 06:37:36 -0800, Devarsh Thakkar wrote:
> Add function to derive floating value of vertical
> refresh rate from drm mode using pixel clock,
> horizontal total size and vertical total size.
> 
> Use this function to find suitable mode having vrefresh
> value which is matching with user provided vrefresh value.
> 
> If user doesn't provide any vrefresh value in args then
> update vertical refresh rate value in pipe args using this
> function.
> 
> Also use this function for printing floating vrefresh while
> dumping all available modes.
> 
> This will give more accurate picture to user for available modes
> differentiated by floating vertical refresh rate and help user
> select more appropriate mode using suitable refresh rate value.

Any chance you could use the merge requests infra instead of patches on
the mailing list? :)
https://gitlab.freedesktop.org/mesa/drm/merge_requests

This will allow much easier reviews of the patch's revisions and
build-test your changes automatically.

Can I also suggest you split the unrelated changes into individual
commits?

> 
> V4:
> 1) While setting mode, print mode name and vrefresh using struct
>    drmModeModeInfo instead of struct pipe_args.
> 2) Revert back to using a float value instead of float *
>    for vrefresh arg in connector_find_mode().
> 
> V3:
> 1) Change name of function used to derive refresh rate.
> 
> V2:
> 1) Don't use inline function for deriving refresh rate from mode.
> 2) If requested mode not found, print refresh rate only
>    if user had provided it in args.
> 
> Signed-off-by: Devarsh Thakkar <devarsh.thakkar at xilinx.com>
> Reviewed-by: Neil Armstrong <narmstrong at baylibre.com>
> ---
>  tests/modetest/modetest.c | 35 +++++++++++++++++++++++------------
>  1 file changed, 23 insertions(+), 12 deletions(-)
> 
> diff --git a/tests/modetest/modetest.c b/tests/modetest/modetest.c
> index b4edfcb..e998e8e 100644
> --- a/tests/modetest/modetest.c
> +++ b/tests/modetest/modetest.c
> @@ -133,6 +133,12 @@ static inline int64_t U642I64(uint64_t val)
>  	return (int64_t)*((int64_t *)&val);
>  }
>  
> +static float mode_vrefresh(drmModeModeInfo *mode)
> +{
> +	return  mode->clock * 1000.00
> +			/ (mode->htotal * mode->vtotal);
> +}
> +
>  #define bit_name_fn(res)					\
>  const char * res##_str(int type) {				\
>  	unsigned int i;						\
> @@ -210,9 +216,9 @@ static void dump_encoders(struct device *dev)
>  
>  static void dump_mode(drmModeModeInfo *mode)
>  {
> -	printf("  %s %d %d %d %d %d %d %d %d %d %d",
> +	printf("  %s %.2f %d %d %d %d %d %d %d %d %d",
>  	       mode->name,
> -	       mode->vrefresh,
> +	       mode_vrefresh(mode),
>  	       mode->hdisplay,
>  	       mode->hsync_start,
>  	       mode->hsync_end,
> @@ -828,7 +834,6 @@ connector_find_mode(struct device *dev, uint32_t con_id, const char *mode_str,
>  	drmModeConnector *connector;
>  	drmModeModeInfo *mode;
>  	int i;
> -	float mode_vrefresh;
>  
>  	connector = get_connector_by_id(dev, con_id);
>  	if (!connector || !connector->count_modes)
> @@ -837,15 +842,14 @@ connector_find_mode(struct device *dev, uint32_t con_id, const char *mode_str,
>  	for (i = 0; i < connector->count_modes; i++) {
>  		mode = &connector->modes[i];
>  		if (!strcmp(mode->name, mode_str)) {
> -			/* If the vertical refresh frequency is not specified then return the
> -			 * first mode that match with the name. Else, return the mode that match
> -			 * the name and the specified vertical refresh frequency.
> +			/* If the vertical refresh frequency is not specified
> +			 * then return the first mode that match with the name.
> +			 * Else, return the mode that match the name and
> +			 * the specified vertical refresh frequency.
>  			 */
> -			mode_vrefresh = mode->clock * 1000.00
> -					/ (mode->htotal * mode->vtotal);
>  			if (vrefresh == 0)
>  				return mode;
> -			else if (fabs(mode_vrefresh - vrefresh) < 0.005)
> +			else if (fabs(mode_vrefresh(mode) - vrefresh) < 0.005)
>  				return mode;
>  		}
>  	}
> @@ -911,7 +915,13 @@ static int pipe_find_crtc_and_mode(struct device *dev, struct pipe_arg *pipe)
>  		mode = connector_find_mode(dev, pipe->con_ids[i],
>  					   pipe->mode_str, pipe->vrefresh);
>  		if (mode == NULL) {
> -			fprintf(stderr,
> +			if (pipe->vrefresh)
> +				fprintf(stderr,
> +				"failed to find mode "
> +				"\"%s-%.2fHz\" for connector %s\n",
> +				pipe->mode_str, pipe->vrefresh, pipe->cons[i]);
> +			else
> +				fprintf(stderr,
>  				"failed to find mode \"%s\" for connector %s\n",
>  				pipe->mode_str, pipe->cons[i]);
>  			return -EINVAL;
> @@ -1398,7 +1408,7 @@ static void atomic_set_mode(struct device *dev, struct pipe_arg *pipes, unsigned
>  			continue;
>  
>  		printf("setting mode %s-%.2fHz on connectors ",
> -		       pipe->mode_str, pipe->vrefresh);
> +		       pipe->mode->name, mode_vrefresh(pipe->mode));
>  		for (j = 0; j < pipe->num_cons; ++j) {
>  			printf("%s, ", pipe->cons[j]);
>  			add_property(dev, pipe->con_ids[j], "CRTC_ID", pipe->crtc->crtc->crtc_id);
> @@ -1481,7 +1491,8 @@ static void set_mode(struct device *dev, struct pipe_arg *pipes, unsigned int co
>  			continue;
>  
>  		printf("setting mode %s-%.2fHz@%s on connectors ",
> -		       pipe->mode_str, pipe->vrefresh, pipe->format_str);
> +		       pipe->mode->name, mode_vrefresh(pipe->mode),
> +		       pipe->format_str);
>  		for (j = 0; j < pipe->num_cons; ++j)
>  			printf("%s, ", pipe->cons[j]);
>  		printf("crtc %d\n", pipe->crtc->crtc->crtc_id);
> -- 
> 2.7.4
> 


More information about the dri-devel mailing list