[Intel-gfx] [PATCH 4/5] drm/i915: Introduce intel_crtc_state_reset()

Souza, Jose jose.souza at intel.com
Tue Dec 10 02:12:23 UTC 2019


On Thu, 2019-11-07 at 16:24 +0200, Ville Syrjala wrote:
> From: Ville Syrjälä <ville.syrjala at linux.intel.com>
> 
> We have a few places where we want to reset a crtc state to its
> default values. Let's add a helper for that. We'll need the new
> __drm_atomic_helper_crtc_state_reset() helper for this to allow
> us to just reset the state itself without clobbering the
> crtc->state pointer.
> 
> And while at it let's zero out the whole thing, except a few
> choice member which we'll mark as "invalid". And thanks to this
> we can now nuke intel_crtc_init_scalers().
> 
> Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_display.c | 47 +++++++++---------
> --
>  1 file changed, 22 insertions(+), 25 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c
> b/drivers/gpu/drm/i915/display/intel_display.c
> index e6291841053f..fd4120533c3f 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -164,7 +164,6 @@ static void vlv_prepare_pll(struct intel_crtc
> *crtc,
>  			    const struct intel_crtc_state
> *pipe_config);
>  static void chv_prepare_pll(struct intel_crtc *crtc,
>  			    const struct intel_crtc_state
> *pipe_config);
> -static void intel_crtc_init_scalers(struct intel_crtc_state
> *crtc_state);
>  static void skylake_pfit_enable(const struct intel_crtc_state
> *crtc_state);
>  static void ironlake_pfit_disable(const struct intel_crtc_state
> *old_crtc_state);
>  static void ironlake_pfit_enable(const struct intel_crtc_state
> *crtc_state);
> @@ -10655,8 +10654,6 @@ static bool haswell_get_pipe_config(struct
> intel_crtc *crtc,
>  	u64 power_domain_mask;
>  	bool active;
>  
> -	intel_crtc_init_scalers(pipe_config);
> -
>  	pipe_config->master_transcoder = INVALID_TRANSCODER;
>  
>  	power_domain = POWER_DOMAIN_PIPE(crtc->pipe);
> @@ -11704,6 +11701,20 @@ static void ironlake_pch_clock_get(struct
> intel_crtc *crtc,
>  					 &pipe_config->fdi_m_n);
>  }
>  
> +static void intel_crtc_state_reset(struct intel_crtc_state
> *crtc_state,
> +				   struct intel_crtc *crtc)
> +{
> +	memset(crtc_state, 0, sizeof(*crtc_state));
> +
> +	__drm_atomic_helper_crtc_state_reset(&crtc_state->uapi, &crtc-
> >base);
> +
> +	crtc_state->cpu_transcoder = INVALID_TRANSCODER;
> +	crtc_state->master_transcoder = INVALID_TRANSCODER;

At least master_transcoder is set to invalid again but we can remove
the redundant sets later

Reviewed-by: José Roberto de Souza <jose.souza at intel.com>

> +	crtc_state->hsw_workaround_pipe = INVALID_PIPE;
> +	crtc_state->output_format = INTEL_OUTPUT_FORMAT_INVALID;
> +	crtc_state->scaler_state.scaler_id = -1;
> +}
> +
>  /* Returns the currently programmed mode of the given encoder. */
>  struct drm_display_mode *
>  intel_encoder_current_mode(struct intel_encoder *encoder)
> @@ -11729,7 +11740,7 @@ intel_encoder_current_mode(struct
> intel_encoder *encoder)
>  		return NULL;
>  	}
>  
> -	crtc_state->uapi.crtc = &crtc->base;
> +	intel_crtc_state_reset(crtc_state, crtc);
>  
>  	if (!dev_priv->display.get_pipe_config(crtc, crtc_state)) {
>  		kfree(crtc_state);
> @@ -13577,18 +13588,14 @@ verify_crtc_state(struct intel_crtc *crtc,
>  	struct drm_device *dev = crtc->base.dev;
>  	struct drm_i915_private *dev_priv = to_i915(dev);
>  	struct intel_encoder *encoder;
> -	struct intel_crtc_state *pipe_config;
> -	struct drm_atomic_state *state;
> +	struct intel_crtc_state *pipe_config = old_crtc_state;
> +	struct drm_atomic_state *state = old_crtc_state->uapi.state;
>  	bool active;
>  
> -	state = old_crtc_state->uapi.state;
>  	__drm_atomic_helper_crtc_destroy_state(&old_crtc_state->uapi);
>  	intel_crtc_free_hw_state(old_crtc_state);
> -
> -	pipe_config = old_crtc_state;
> -	memset(pipe_config, 0, sizeof(*pipe_config));
> -	pipe_config->uapi.crtc = &crtc->base;
> -	pipe_config->uapi.state = state;
> +	intel_crtc_state_reset(old_crtc_state, crtc);
> +	old_crtc_state->uapi.state = state;
>  
>  	DRM_DEBUG_KMS("[CRTC:%d:%s]\n", crtc->base.base.id, crtc-
> >base.name);
>  
> @@ -15745,15 +15752,6 @@ intel_cursor_plane_create(struct
> drm_i915_private *dev_priv,
>  	return ERR_PTR(ret);
>  }
>  
> -static void intel_crtc_init_scalers(struct intel_crtc_state
> *crtc_state)
> -{
> -	struct intel_crtc_scaler_state *scaler_state =
> -		&crtc_state->scaler_state;
> -
> -	memset(scaler_state, 0, sizeof(*scaler_state));
> -	scaler_state->scaler_id = -1;
> -}
> -
>  #define INTEL_CRTC_FUNCS \
>  	.gamma_set = drm_atomic_helper_legacy_gamma_set, \
>  	.set_config = drm_atomic_helper_set_config, \
> @@ -15836,9 +15834,9 @@ static struct intel_crtc
> *intel_crtc_alloc(void)
>  		return ERR_PTR(-ENOMEM);
>  	}
>  
> -	__drm_atomic_helper_crtc_reset(&crtc->base, &crtc_state->uapi);
> -	intel_crtc_init_scalers(crtc_state);
> +	intel_crtc_state_reset(crtc_state, crtc);
>  
> +	crtc->base.state = &crtc_state->uapi;
>  	crtc->config = crtc_state;
>  
>  	return crtc;
> @@ -17414,8 +17412,7 @@ static void
> intel_modeset_readout_hw_state(struct drm_device *dev)
>  
>  		__drm_atomic_helper_crtc_destroy_state(&crtc_state-
> >uapi);
>  		intel_crtc_free_hw_state(crtc_state);
> -		memset(crtc_state, 0, sizeof(*crtc_state));
> -		__drm_atomic_helper_crtc_reset(&crtc->base,
> &crtc_state->uapi);
> +		intel_crtc_state_reset(crtc_state, crtc);
>  
>  		crtc_state->hw.active = crtc_state->hw.enable =
>  			dev_priv->display.get_pipe_config(crtc,
> crtc_state);


More information about the dri-devel mailing list