[PATCH RESEND 3/4] dt-bindings: drm/bridge: analogix-anx78xx: support bypass GPIO

[Hsin-Yi Wang]

On Mon, Dec 9, 2019 at 10:55 PM Laurent Pinchart
<laurent.pinchart at ideasonboard.com> wrote:
>
> Hi Hsin-Yi,
>
> Thank you for the patch.
>
> On Mon, Dec 09, 2019 at 10:50:15PM +0800, Hsin-Yi Wang wrote:
> > Support optional feature: bypass GPIO.
> >
> > Some SoC (eg. mt8173) have a hardware mux that connects to 2 ports:
> > anx7688 and hdmi. When the GPIO is active, the bridge is bypassed.
>
> This doesn't look like the right place to fix this, as the mux is
> unrelated to the bridge. You would have to duplicate this logic in every
> bridge driver otherwise.
>
> Could you describe the hardware topology in a bit more details ? I can
> then try to advise on how to best support it.
>
Hi Laurent,

The mt8173 layout is:

MT8173 HDMI bridge-- hardware mux --- HDMI
                                                   |
                                                    ------------ anx7688
There's a hardware mux that takes mt8173 hdmi as input and has 2
output port: native hdmi and anx7688 bridge.
If gpio is active, we would like it to go to HDMI.

Previous approach is to make hardware mux a generic gpio mux bridge,
but this is probably a very rare use case that is only for
mt8173.(https://lore.kernel.org/lkml/57723AD2.8020806@codeaurora.org/)
We merge the mux and anx7688 to a single bridge and leave this as an
optional feature in this time.

Thanks.