[PATCH 3/5] mfd: atmel-hlcdc: return in case of error

[Claudiu Beznea]

For HLCDC timing engine configurations bit ATMEL_HLCDC_SIP of
ATMEL_HLCDC_SR needs to checked if it is equal with zero before applying
new configuration to timing engine. In case of timeout there is no
indicator about this, so, return with error in case of timeout in
regmap_atmel_hlcdc_reg_write() and also print a message about this.

Signed-off-by: Claudiu Beznea <claudiu.beznea at microchip.com>
---
 drivers/mfd/atmel-hlcdc.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/drivers/mfd/atmel-hlcdc.c b/drivers/mfd/atmel-hlcdc.c
index 64013c57a920..19f1dbeb8bcd 100644
--- a/drivers/mfd/atmel-hlcdc.c
+++ b/drivers/mfd/atmel-hlcdc.c
@@ -39,10 +39,16 @@ static int regmap_atmel_hlcdc_reg_write(void *context, unsigned int reg,
 
 	if (reg <= ATMEL_HLCDC_DIS) {
 		u32 status;
-
-		readl_poll_timeout_atomic(hregmap->regs + ATMEL_HLCDC_SR,
-					  status, !(status & ATMEL_HLCDC_SIP),
-					  1, 100);
+		int ret;
+
+		ret = readl_poll_timeout_atomic(hregmap->regs + ATMEL_HLCDC_SR,
+						status,
+						!(status & ATMEL_HLCDC_SIP),
+						1, 100);
+		if (ret) {
+			pr_err("Timeout waiting for ATMEL_HLCDC_SIP\n");
+			return ret;
+		}
 	}
 
 	writel(val, hregmap->regs + reg);
-- 
2.7.4