[PATCH 2/3] drm/nouveau: Check framebuffer size against bo

James Jones jajones at nvidia.com
Wed Dec 11 20:59:21 UTC 2019


Make sure framebuffer dimensions and tiling
parameters will not result in accesses beyond the
end of the GEM buffer they are bound to.

Signed-off-by: James Jones <jajones at nvidia.com>
---
 drivers/gpu/drm/nouveau/nouveau_display.c | 93 +++++++++++++++++++++++
 1 file changed, 93 insertions(+)

diff --git a/drivers/gpu/drm/nouveau/nouveau_display.c b/drivers/gpu/drm/nouveau/nouveau_display.c
index 6f038511a03a..f1509392d7b7 100644
--- a/drivers/gpu/drm/nouveau/nouveau_display.c
+++ b/drivers/gpu/drm/nouveau/nouveau_display.c
@@ -224,6 +224,72 @@ static const struct drm_framebuffer_funcs nouveau_framebuffer_funcs = {
 	.create_handle = nouveau_user_framebuffer_create_handle,
 };
 
+static inline uint32_t
+nouveau_get_width_in_blocks(uint32_t stride)
+{
+	/* GOBs per block in the x direction is always one, and GOBs are
+	 * 64 bytes wide
+	 */
+	static const uint32_t log_block_width = 6;
+
+	return (stride + (1 << log_block_width) - 1) >> log_block_width;
+}
+
+static inline uint32_t
+nouveau_get_height_in_blocks(struct nouveau_drm *drm,
+			     uint32_t height,
+			     uint32_t log_block_height_in_gobs)
+{
+	uint32_t log_gob_height;
+	uint32_t log_block_height;
+
+	BUG_ON(drm->client.device.info.family < NV_DEVICE_INFO_V0_TESLA);
+
+	if (drm->client.device.info.family < NV_DEVICE_INFO_V0_FERMI)
+		log_gob_height = 2;
+	else
+		log_gob_height = 3;
+
+	log_block_height = log_block_height_in_gobs + log_gob_height;
+
+	return (height + (1 << log_block_height) - 1) >> log_block_height;
+}
+
+static int
+nouveau_check_bl_size(struct nouveau_drm *drm, struct nouveau_bo *nvbo,
+		      uint32_t offset, uint32_t stride, uint32_t h,
+		      uint32_t tile_mode)
+{
+	uint32_t gob_size, bw, bh;
+	uint64_t bl_size;
+
+	BUG_ON(drm->client.device.info.family < NV_DEVICE_INFO_V0_TESLA);
+
+	if (drm->client.device.info.chipset >= 0xc0)
+		tile_mode >>= 4;
+
+	BUG_ON(tile_mode & 0xFFFFFFF0);
+
+	if (drm->client.device.info.family < NV_DEVICE_INFO_V0_FERMI)
+		gob_size = 256;
+	else
+		gob_size = 512;
+
+	bw = nouveau_get_width_in_blocks(stride);
+	bh = nouveau_get_height_in_blocks(drm, h, tile_mode);
+
+	bl_size = bw * bh * (1 << tile_mode) * gob_size;
+
+	DRM_DEBUG_KMS("offset=%u stride=%u h=%u tile_mode=0x%02x bw=%u bh=%u gob_size=%u bl_size=%llu size=%lu\n",
+		      offset, stride, h, tile_mode, bw, bh, gob_size, bl_size,
+		      nvbo->bo.mem.size);
+
+	if (bl_size + offset > nvbo->bo.mem.size)
+		return -ERANGE;
+
+	return 0;
+}
+
 int
 nouveau_framebuffer_new(struct drm_device *dev,
 			const struct drm_mode_fb_cmd2 *mode_cmd,
@@ -232,6 +298,8 @@ nouveau_framebuffer_new(struct drm_device *dev,
 {
 	struct nouveau_drm *drm = nouveau_drm(dev);
 	struct nouveau_framebuffer *fb;
+	const struct drm_format_info *info;
+	unsigned int width, height, i;
 	int ret;
 
         /* YUV overlays have special requirements pre-NV50 */
@@ -254,6 +322,31 @@ nouveau_framebuffer_new(struct drm_device *dev,
 		return -EINVAL;
 	}
 
+	info = drm_get_format_info(dev, mode_cmd);
+
+	for (i = 0; i < info->num_planes; i++) {
+		width = drm_format_info_plane_width(info,
+						    mode_cmd->width,
+						    i);
+		height = drm_format_info_plane_height(info,
+						      mode_cmd->height,
+						      i);
+
+		if (nvbo->kind) {
+			ret = nouveau_check_bl_size(drm, nvbo,
+						    mode_cmd->offsets[i],
+						    mode_cmd->pitches[i],
+						    height, nvbo->mode);
+			if (ret)
+				return ret;
+		} else {
+			uint32_t size = mode_cmd->pitches[i] * height;
+
+			if (size + mode_cmd->offsets[i] > nvbo->bo.mem.size)
+				return -ERANGE;
+		}
+	}
+
 	if (!(fb = *pfb = kzalloc(sizeof(*fb), GFP_KERNEL)))
 		return -ENOMEM;
 
-- 
2.17.1



More information about the dri-devel mailing list