[PATCH 1/1] drm/dp: get/set phy compliance pattern
Manasi Navare
manasi.d.navare at intel.com
Wed Dec 11 23:01:02 UTC 2019
On Mon, Nov 18, 2019 at 11:55:55PM +0530, Animesh Manna wrote:
> During phy compliance auto test mode source need to read
> requested test pattern from sink through DPCD. After processing
> the request source need to set the pattern. So set/get method
> added in drm layer as it is DP protocol.
You need to always make the changes, up the rev but still always include
this as part of the whole series before sending it out so that the reviewer gets a full context.
Also this was not sent to intel-gfx and only to dri-devel, these patches that are used in i915
but changes in DRM need to be sent to both the M-Ls.
Could you send this v1 along with the new revisions of other patches together as a series
to both intel-gfx and dri-devel? That would also make it easier for the review
since I see the patches 5-7 sent with new revisions but not others (1-4) which proobably have a r-b or ack,
but new revision of the wnetire series would be great.
Manasi
>
> v1: As per review feedback from Manasi on RFC version,
> - added dp revision as function argument in set_phy_pattern api.
> - used int for link_rate and u8 for lane_count to align with existing code.
>
> Signed-off-by: Animesh Manna <animesh.manna at intel.com>
> ---
> drivers/gpu/drm/drm_dp_helper.c | 93 +++++++++++++++++++++++++++++++++
> include/drm/drm_dp_helper.h | 33 +++++++++++-
> 2 files changed, 125 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c
> index 2c7870aef469..91c80973aa83 100644
> --- a/drivers/gpu/drm/drm_dp_helper.c
> +++ b/drivers/gpu/drm/drm_dp_helper.c
> @@ -1371,3 +1371,96 @@ int drm_dp_dsc_sink_supported_input_bpcs(const u8 dsc_dpcd[DP_DSC_RECEIVER_CAP_S
> return num_bpc;
> }
> EXPORT_SYMBOL(drm_dp_dsc_sink_supported_input_bpcs);
> +
> +/**
> + * drm_dp_get_phy_test_pattern() - get the requested pattern from the sink.
> + * @aux: DisplayPort AUX channel
> + * @data: DP phy compliance test parameters.
> + *
> + * Returns 0 on success or a negative error code on failure.
> + */
> +int drm_dp_get_phy_test_pattern(struct drm_dp_aux *aux,
> + struct drm_dp_phy_test_params *data)
> +{
> + int err;
> + u8 rate, lanes;
> +
> + err = drm_dp_dpcd_readb(aux, DP_TEST_LINK_RATE, &rate);
> + if (err < 0)
> + return err;
> + data->link_rate = drm_dp_bw_code_to_link_rate(rate);
> +
> + err = drm_dp_dpcd_readb(aux, DP_TEST_LANE_COUNT, &lanes);
> + if (err < 0)
> + return err;
> + data->num_lanes = lanes & DP_MAX_LANE_COUNT_MASK;
> +
> + if (lanes & DP_ENHANCED_FRAME_CAP)
> + data->enahanced_frame_cap = true;
> +
> + err = drm_dp_dpcd_readb(aux, DP_PHY_TEST_PATTERN, &data->phy_pattern);
> + if (err < 0)
> + return err;
> +
> + switch (data->phy_pattern) {
> + case DP_PHY_TEST_PATTERN_80BIT_CUSTOM:
> + err = drm_dp_dpcd_read(aux, DP_TEST_80BIT_CUSTOM_PATTERN_7_0,
> + &data->custom80, 10);
> + if (err < 0)
> + return err;
> +
> + break;
> + case DP_PHY_TEST_PATTERN_CP2520:
> + err = drm_dp_dpcd_read(aux, DP_TEST_HBR2_SCRAMBLER_RESET,
> + &data->hbr2_reset, 2);
> + if (err < 0)
> + return err;
> + }
> +
> + return 0;
> +}
> +EXPORT_SYMBOL(drm_dp_get_phy_test_pattern);
> +
> +/**
> + * drm_dp_set_phy_test_pattern() - set the pattern to the sink.
> + * @aux: DisplayPort AUX channel
> + * @data: DP phy compliance test parameters.
> + *
> + * Returns 0 on success or a negative error code on failure.
> + */
> +int drm_dp_set_phy_test_pattern(struct drm_dp_aux *aux,
> + struct drm_dp_phy_test_params *data, u8 dp_rev)
> +{
> + int err, i;
> + u8 link_config[2];
> + u8 test_pattern;
> +
> + link_config[0] = drm_dp_link_rate_to_bw_code(data->link_rate);
> + link_config[1] = data->num_lanes;
> + if (data->enahanced_frame_cap)
> + link_config[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN;
> + err = drm_dp_dpcd_write(aux, DP_LINK_BW_SET, link_config, 2);
> + if (err < 0)
> + return err;
> +
> + test_pattern = data->phy_pattern;
> + if (dp_rev < 0x12) {
> + test_pattern = (test_pattern << 2) &
> + DP_LINK_QUAL_PATTERN_11_MASK;
> + err = drm_dp_dpcd_writeb(aux, DP_TRAINING_PATTERN_SET,
> + test_pattern);
> + if (err < 0)
> + return err;
> + } else {
> + for (i = 0; i < data->num_lanes; i++) {
> + err = drm_dp_dpcd_writeb(aux,
> + DP_LINK_QUAL_LANE0_SET + i,
> + test_pattern);
> + if (err < 0)
> + return err;
> + }
> + }
> +
> + return 0;
> +}
> +EXPORT_SYMBOL(drm_dp_set_phy_test_pattern);
> diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
> index 51ecb5112ef8..a64267d197d0 100644
> --- a/include/drm/drm_dp_helper.h
> +++ b/include/drm/drm_dp_helper.h
> @@ -699,7 +699,16 @@
> # define DP_TEST_CRC_SUPPORTED (1 << 5)
> # define DP_TEST_COUNT_MASK 0xf
>
> -#define DP_TEST_PHY_PATTERN 0x248
> +#define DP_PHY_TEST_PATTERN 0x248
> +# define DP_PHY_TEST_PATTERN_SEL_MASK 0x7
> +# define DP_PHY_TEST_PATTERN_NONE 0x0
> +# define DP_PHY_TEST_PATTERN_D10_2 0x1
> +# define DP_PHY_TEST_PATTERN_ERROR_COUNT 0x2
> +# define DP_PHY_TEST_PATTERN_PRBS7 0x3
> +# define DP_PHY_TEST_PATTERN_80BIT_CUSTOM 0x4
> +# define DP_PHY_TEST_PATTERN_CP2520 0x5
> +
> +#define DP_TEST_HBR2_SCRAMBLER_RESET 0x24A
> #define DP_TEST_80BIT_CUSTOM_PATTERN_7_0 0x250
> #define DP_TEST_80BIT_CUSTOM_PATTERN_15_8 0x251
> #define DP_TEST_80BIT_CUSTOM_PATTERN_23_16 0x252
> @@ -1568,4 +1577,26 @@ static inline void drm_dp_cec_unset_edid(struct drm_dp_aux *aux)
>
> #endif
>
> +/**
> + * struct drm_dp_phy_test_params - DP Phy Compliance parameters
> + * @link: Link information.
> + * @phy_pattern: DP Phy test pattern from DPCD 0x248 (sink)
> + * @hb2_reset: DP HBR2_COMPLIANCE_SCRAMBLER_RESET from DCPD
> + * 0x24A and 0x24B (sink)
> + * @custom80: DP Test_80BIT_CUSTOM_PATTERN from DPCDs 0x250
> + * through 0x259.
> + */
> +struct drm_dp_phy_test_params {
> + int link_rate;
> + u8 num_lanes;
> + u8 phy_pattern;
> + u8 hbr2_reset[2];
> + u8 custom80[10];
> + bool enahanced_frame_cap;
> +};
> +
> +int drm_dp_get_phy_test_pattern(struct drm_dp_aux *aux,
> + struct drm_dp_phy_test_params *data);
> +int drm_dp_set_phy_test_pattern(struct drm_dp_aux *aux,
> + struct drm_dp_phy_test_params *data, u8 dp_rev);
> #endif /* _DRM_DP_HELPER_H_ */
> --
> 2.22.0
>
More information about the dri-devel
mailing list