[PATCH] drm: rcar-du: lvds: Get mode from state
Laurent Pinchart
laurent.pinchart at ideasonboard.com
Fri Dec 13 01:08:47 UTC 2019
Hi Fabrizio,
On Mon, Dec 02, 2019 at 03:06:13PM +0000, Fabrizio Castro wrote:
> > From: linux-renesas-soc-owner at vger.kernel.org <linux-renesas-soc-owner at vger.kernel.org> On Behalf Of Laurent Pinchart
> > Sent: 16 October 2019 00:25
> > Subject: [PATCH] drm: rcar-du: lvds: Get mode from state
> >
> > The R-Car LVDS encoder driver implements the bridge .mode_set()
> > operation for the sole purpose of storing the mode in the LVDS private
> > data, to be used later when enabling the encoder.
> >
> > Switch to the bridge .atomic_enable() and .atomic_disable() operations
> > in order to access the global atomic state, and get the mode from the
> > state instead. Remove both the unneeded .mode_set() operation and the
> > display_mode and mode fields storing state data from the rcar_lvds
> > private structure.
> >
> > As a side effect we get the CRTC from the state, replace the CRTC
> > pointer retrieved through the bridge's encoder that shouldn't be used by
> > atomic drivers.
> >
> > Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>
> > ---
> > drivers/gpu/drm/rcar-du/rcar_lvds.c | 125 ++++++++++++++--------------
> > 1 file changed, 61 insertions(+), 64 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/rcar-du/rcar_lvds.c b/drivers/gpu/drm/rcar-du/rcar_lvds.c
> > index 8c6c172bbf2e..8f355ea07cb5 100644
> > --- a/drivers/gpu/drm/rcar-du/rcar_lvds.c
> > +++ b/drivers/gpu/drm/rcar-du/rcar_lvds.c
> > @@ -65,9 +65,6 @@ struct rcar_lvds {
> > struct clk *dotclkin[2]; /* External DU clocks */
> > } clocks;
> >
> > - struct drm_display_mode display_mode;
> > - enum rcar_lvds_mode mode;
> > -
> > struct drm_bridge *companion;
> > bool dual_link;
> > };
> > @@ -402,10 +399,51 @@ EXPORT_SYMBOL_GPL(rcar_lvds_clk_disable);
> > * Bridge
> > */
> >
> > -static void rcar_lvds_enable(struct drm_bridge *bridge)
> > +static enum rcar_lvds_mode rcar_lvds_get_lvds_mode(struct rcar_lvds *lvds,
> > + const struct drm_connector *connector)
> > +{
> > + const struct drm_display_info *info;
> > + enum rcar_lvds_mode mode;
> > +
> > + /*
> > + * There is no API yet to retrieve LVDS mode from a bridge, only panels
> > + * are supported.
> > + */
> > + if (!lvds->panel)
> > + return RCAR_LVDS_MODE_JEIDA;
> > +
> > + info = &connector->display_info;
> > + if (!info->num_bus_formats || !info->bus_formats) {
> > + dev_err(lvds->dev, "no LVDS bus format reported\n");
> > + return RCAR_LVDS_MODE_JEIDA;
> > + }
> > +
> > + switch (info->bus_formats[0]) {
> > + case MEDIA_BUS_FMT_RGB666_1X7X3_SPWG:
> > + case MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA:
> > + mode = RCAR_LVDS_MODE_JEIDA;
> > + break;
> > + case MEDIA_BUS_FMT_RGB888_1X7X4_SPWG:
> > + mode = RCAR_LVDS_MODE_VESA;
> > + break;
> > + default:
> > + dev_err(lvds->dev, "unsupported LVDS bus format 0x%04x\n",
> > + info->bus_formats[0]);
> > + return RCAR_LVDS_MODE_JEIDA;
> > + }
> > +
> > + if (info->bus_flags & DRM_BUS_FLAG_DATA_LSB_TO_MSB)
> > + mode |= RCAR_LVDS_MODE_MIRROR;
> > +
> > + return mode;
> > +}
> > +
> > +static void rcar_lvds_atomic_enable(struct drm_bridge *bridge,
> > + struct drm_atomic_state *state)
> > {
> > struct rcar_lvds *lvds = bridge_to_rcar_lvds(bridge);
> > - const struct drm_display_mode *mode = &lvds->display_mode;
> > + struct drm_connector *connector;
> > + struct drm_crtc *crtc;
> > u32 lvdhcr;
> > u32 lvdcr0;
> > int ret;
> > @@ -414,6 +452,11 @@ static void rcar_lvds_enable(struct drm_bridge *bridge)
> > if (ret < 0)
> > return;
> >
> > + /* Retrieve the connector and CRTC through the atomic state. */
> > + connector = drm_atomic_get_new_connector_for_encoder(state,
> > + bridge->encoder);
> > + crtc = drm_atomic_get_new_connector_state(state, connector)->crtc;
> > +
> > /* Enable the companion LVDS encoder in dual-link mode. */
> > if (lvds->dual_link && lvds->companion)
> > lvds->companion->funcs->enable(lvds->companion);
>
> This should call atomic_enable now, therefore I take this won't work as-is on
> a system with a companion encoder. Do you mind testing this patch on a dual-LVDS
> capable system?
I'll do so tomorrow and send a new version.
> > @@ -452,18 +495,20 @@ static void rcar_lvds_enable(struct drm_bridge *bridge)
> > * PLL clock configuration on all instances but the companion in
> > * dual-link mode.
> > */
> > - if (!lvds->dual_link || lvds->companion)
> > + if (!lvds->dual_link || lvds->companion) {
> > + const struct drm_crtc_state *crtc_state =
> > + drm_atomic_get_new_crtc_state(state, crtc);
> > + const struct drm_display_mode *mode =
> > + &crtc_state->adjusted_mode;
> > +
> > lvds->info->pll_setup(lvds, mode->clock * 1000);
> > + }
> >
> > /* Set the LVDS mode and select the input. */
> > - lvdcr0 = lvds->mode << LVDCR0_LVMD_SHIFT;
> > + lvdcr0 = rcar_lvds_get_lvds_mode(lvds, connector) << LVDCR0_LVMD_SHIFT;
> >
> > if (lvds->bridge.encoder) {
> > - /*
> > - * FIXME: We should really retrieve the CRTC through the state,
> > - * but how do we get a state pointer?
> > - */
> > - if (drm_crtc_index(lvds->bridge.encoder->crtc) == 2)
> > + if (drm_crtc_index(crtc) == 2)
> > lvdcr0 |= LVDCR0_DUSEL;
> > }
> >
> > @@ -520,7 +565,8 @@ static void rcar_lvds_enable(struct drm_bridge *bridge)
> > }
> > }
> >
> > -static void rcar_lvds_disable(struct drm_bridge *bridge)
> > +static void rcar_lvds_atomic_disable(struct drm_bridge *bridge,
> > + struct drm_atomic_state *state)
> > {
> > struct rcar_lvds *lvds = bridge_to_rcar_lvds(bridge);
> >
> > @@ -558,54 +604,6 @@ static bool rcar_lvds_mode_fixup(struct drm_bridge *bridge,
> > return true;
> > }
> >
> > -static void rcar_lvds_get_lvds_mode(struct rcar_lvds *lvds)
> > -{
> > - struct drm_display_info *info = &lvds->connector.display_info;
> > - enum rcar_lvds_mode mode;
> > -
> > - /*
> > - * There is no API yet to retrieve LVDS mode from a bridge, only panels
> > - * are supported.
> > - */
> > - if (!lvds->panel)
> > - return;
> > -
> > - if (!info->num_bus_formats || !info->bus_formats) {
> > - dev_err(lvds->dev, "no LVDS bus format reported\n");
> > - return;
> > - }
> > -
> > - switch (info->bus_formats[0]) {
> > - case MEDIA_BUS_FMT_RGB666_1X7X3_SPWG:
> > - case MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA:
> > - mode = RCAR_LVDS_MODE_JEIDA;
> > - break;
> > - case MEDIA_BUS_FMT_RGB888_1X7X4_SPWG:
> > - mode = RCAR_LVDS_MODE_VESA;
> > - break;
> > - default:
> > - dev_err(lvds->dev, "unsupported LVDS bus format 0x%04x\n",
> > - info->bus_formats[0]);
> > - return;
> > - }
> > -
> > - if (info->bus_flags & DRM_BUS_FLAG_DATA_LSB_TO_MSB)
> > - mode |= RCAR_LVDS_MODE_MIRROR;
> > -
> > - lvds->mode = mode;
> > -}
> > -
> > -static void rcar_lvds_mode_set(struct drm_bridge *bridge,
> > - const struct drm_display_mode *mode,
> > - const struct drm_display_mode *adjusted_mode)
> > -{
> > - struct rcar_lvds *lvds = bridge_to_rcar_lvds(bridge);
> > -
> > - lvds->display_mode = *adjusted_mode;
> > -
> > - rcar_lvds_get_lvds_mode(lvds);
> > -}
> > -
> > static int rcar_lvds_attach(struct drm_bridge *bridge)
> > {
> > struct rcar_lvds *lvds = bridge_to_rcar_lvds(bridge);
> > @@ -647,10 +645,9 @@ static void rcar_lvds_detach(struct drm_bridge *bridge)
> > static const struct drm_bridge_funcs rcar_lvds_bridge_ops = {
> > .attach = rcar_lvds_attach,
> > .detach = rcar_lvds_detach,
> > - .enable = rcar_lvds_enable,
> > - .disable = rcar_lvds_disable,
> > + .atomic_enable = rcar_lvds_atomic_enable,
> > + .atomic_disable = rcar_lvds_atomic_disable,
> > .mode_fixup = rcar_lvds_mode_fixup,
> > - .mode_set = rcar_lvds_mode_set,
> > };
> >
> > bool rcar_lvds_dual_link(struct drm_bridge *bridge)
--
Regards,
Laurent Pinchart
More information about the dri-devel
mailing list