[PATCH v7 7/9] drm/mediatek: change the dsi phytiming calculate method
CK Hu
ck.hu at mediatek.com
Fri Dec 13 02:45:59 UTC 2019
Hi, Ryan:
On Thu, 2019-12-12 at 14:47 -0800, Ryan Case wrote:
> Hi Enric,
>
> On Thu, Dec 12, 2019 at 5:53 AM Enric Balletbo Serra
> <eballetbo at gmail.com> wrote:
> >
> > Hi,
> >
> > Missatge de CK Hu <ck.hu at mediatek.com> del dia dj., 26 de set. 2019 a les 10:51:
> > >
> > > Hi, Jitao:
> > >
> > > On Thu, 2019-09-19 at 14:58 +0800, Jitao Shi wrote:
> > > > Change the method of frame rate calc which can get more accurate
> > > > frame rate.
> > > >
> > > > data rate = pixel_clock * bit_per_pixel / lanes
> > > > Adjust hfp_wc to adapt the additional phy_data
> > > >
> > > > if MIPI_DSI_MODE_VIDEO_BURST
> > > > hfp_wc = hfp * bpp - data_phy_cycles * lanes - 12 - 6;
> > > > else
> > > > hfp_wc = hfp * bpp - data_phy_cycles * lanes - 12;
> > > >
> > > > Note:
> > > > //(2: 1 for sync, 1 for phy idle)
> > > > data_phy_cycles = T_hs_exit + T_lpx + T_hs_prepare + T_hs_zero + 2;
> > > >
> > > > bpp: bit per pixel
> > >
> > > Reviewed-by: CK Hu <ck.hu at mediatek.com>
> > >
> > > >
> > > > Signed-off-by: Jitao Shi <jitao.shi at mediatek.com>
> > > > Tested-by: Ryan Case <ryandcase at chromium.org>
> > > > ---
> > > > drivers/gpu/drm/mediatek/mtk_dsi.c | 118 ++++++++++++++++++++---------
> >
> > I didn't look in detail yet because looks like there is a lot of maths
> > involved, but this patch introduces a regression for MT8173 or my
> > board (Acer Chromebook R 13 - ELM). I need to revert this patch in
> > order to make the display working, basically, I don't see any error
> > but I only get a black screen. Reverting this patch fixes the issue
> > for me. If anyone knows what could be the problem I'd appreciate.
>
> I won't pretend to be aware of current status but an in progress patch
> with updated timings that have been tested on elm can be found here:
> https://crrev.com/c/1915442
>
It seems that patch works fine in elm, so I would wait for the fixup
patch in rc stage. Otherwise, I would revert this patch.
Regards,
CK
> - ryan
>
> >
> > Thanks,
> > Enric
> >
> > > > 1 file changed, 81 insertions(+), 37 deletions(-)
> > > >
> > > > diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
> > > > index b3676426aeb5..b02373b04848 100644
> > > > --- a/drivers/gpu/drm/mediatek/mtk_dsi.c
> > > > +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
> > > > @@ -136,12 +136,6 @@
> > > > #define DATA_0 (0xff << 16)
> > > > #define DATA_1 (0xff << 24)
> > > >
> > > > -#define T_LPX 5
> > > > -#define T_HS_PREP 6
> > > > -#define T_HS_TRAIL 8
> > > > -#define T_HS_EXIT 7
> > > > -#define T_HS_ZERO 10
> > > > -
> > > > #define NS_TO_CYCLE(n, c) ((n) / (c) + (((n) % (c)) ? 1 : 0))
> > > >
> > > > #define MTK_DSI_HOST_IS_READ(type) \
> > > > @@ -150,6 +144,25 @@
> > > > (type == MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM) || \
> > > > (type == MIPI_DSI_DCS_READ))
> > > >
> > > > +struct mtk_phy_timing {
> > > > + u32 lpx;
> > > > + u32 da_hs_prepare;
> > > > + u32 da_hs_zero;
> > > > + u32 da_hs_trail;
> > > > +
> > > > + u32 ta_go;
> > > > + u32 ta_sure;
> > > > + u32 ta_get;
> > > > + u32 da_hs_exit;
> > > > +
> > > > + u32 clk_hs_zero;
> > > > + u32 clk_hs_trail;
> > > > +
> > > > + u32 clk_hs_prepare;
> > > > + u32 clk_hs_post;
> > > > + u32 clk_hs_exit;
> > > > +};
> > > > +
> > > > struct phy;
> > > >
> > > > struct mtk_dsi_driver_data {
> > > > @@ -180,6 +193,7 @@ struct mtk_dsi {
> > > > enum mipi_dsi_pixel_format format;
> > > > unsigned int lanes;
> > > > struct videomode vm;
> > > > + struct mtk_phy_timing phy_timing;
> > > > int refcount;
> > > > bool enabled;
> > > > u32 irq_data;
> > > > @@ -213,17 +227,36 @@ static void mtk_dsi_phy_timconfig(struct mtk_dsi *dsi)
> > > > {
> > > > u32 timcon0, timcon1, timcon2, timcon3;
> > > > u32 ui, cycle_time;
> > > > + struct mtk_phy_timing *timing = &dsi->phy_timing;
> > > > +
> > > > + ui = DIV_ROUND_UP(1000000000, dsi->data_rate);
> > > > + cycle_time = div_u64(8000000000ULL, dsi->data_rate);
> > > > +
> > > > + timing->lpx = NS_TO_CYCLE(60, cycle_time);
> > > > + timing->da_hs_prepare = NS_TO_CYCLE(50 + 5 * ui, cycle_time);
> > > > + timing->da_hs_zero = NS_TO_CYCLE(110 + 6 * ui, cycle_time);
> > > > + timing->da_hs_trail = NS_TO_CYCLE(77 + 4 * ui, cycle_time);
> > > >
> > > > - ui = 1000 / dsi->data_rate + 0x01;
> > > > - cycle_time = 8000 / dsi->data_rate + 0x01;
> > > > + timing->ta_go = 4 * timing->lpx;
> > > > + timing->ta_sure = 3 * timing->lpx / 2;
> > > > + timing->ta_get = 5 * timing->lpx;
> > > > + timing->da_hs_exit = 2 * timing->lpx;
> > > >
> > > > - timcon0 = T_LPX | T_HS_PREP << 8 | T_HS_ZERO << 16 | T_HS_TRAIL << 24;
> > > > - timcon1 = 4 * T_LPX | (3 * T_LPX / 2) << 8 | 5 * T_LPX << 16 |
> > > > - T_HS_EXIT << 24;
> > > > - timcon2 = ((NS_TO_CYCLE(0x64, cycle_time) + 0xa) << 24) |
> > > > - (NS_TO_CYCLE(0x150, cycle_time) << 16);
> > > > - timcon3 = NS_TO_CYCLE(0x40, cycle_time) | (2 * T_LPX) << 16 |
> > > > - NS_TO_CYCLE(80 + 52 * ui, cycle_time) << 8;
> > > > + timing->clk_hs_zero = NS_TO_CYCLE(336, cycle_time);
> > > > + timing->clk_hs_trail = NS_TO_CYCLE(100, cycle_time) + 10;
> > > > +
> > > > + timing->clk_hs_prepare = NS_TO_CYCLE(64, cycle_time);
> > > > + timing->clk_hs_post = NS_TO_CYCLE(80 + 52 * ui, cycle_time);
> > > > + timing->clk_hs_exit = 2 * timing->lpx;
> > > > +
> > > > + timcon0 = timing->lpx | timing->da_hs_prepare << 8 |
> > > > + timing->da_hs_zero << 16 | timing->da_hs_trail << 24;
> > > > + timcon1 = timing->ta_go | timing->ta_sure << 8 |
> > > > + timing->ta_get << 16 | timing->da_hs_exit << 24;
> > > > + timcon2 = 1 << 8 | timing->clk_hs_zero << 16 |
> > > > + timing->clk_hs_trail << 24;
> > > > + timcon3 = timing->clk_hs_prepare | timing->clk_hs_post << 8 |
> > > > + timing->clk_hs_exit << 16;
> > > >
> > > > writel(timcon0, dsi->regs + DSI_PHY_TIMECON0);
> > > > writel(timcon1, dsi->regs + DSI_PHY_TIMECON1);
> > > > @@ -410,7 +443,8 @@ static void mtk_dsi_config_vdo_timing(struct mtk_dsi *dsi)
> > > > u32 horizontal_sync_active_byte;
> > > > u32 horizontal_backporch_byte;
> > > > u32 horizontal_frontporch_byte;
> > > > - u32 dsi_tmp_buf_bpp;
> > > > + u32 dsi_tmp_buf_bpp, data_phy_cycles;
> > > > + struct mtk_phy_timing *timing = &dsi->phy_timing;
> > > >
> > > > struct videomode *vm = &dsi->vm;
> > > >
> > > > @@ -437,7 +471,34 @@ static void mtk_dsi_config_vdo_timing(struct mtk_dsi *dsi)
> > > > horizontal_backporch_byte = ((vm->hback_porch + vm->hsync_len) *
> > > > dsi_tmp_buf_bpp - 10);
> > > >
> > > > - horizontal_frontporch_byte = (vm->hfront_porch * dsi_tmp_buf_bpp - 12);
> > > > + data_phy_cycles = timing->lpx + timing->da_hs_prepare +
> > > > + timing->da_hs_zero + timing->da_hs_exit + 2;
> > > > +
> > > > + if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_BURST) {
> > > > + if (vm->hfront_porch * dsi_tmp_buf_bpp >
> > > > + data_phy_cycles * dsi->lanes + 18) {
> > > > + horizontal_frontporch_byte = vm->hfront_porch *
> > > > + dsi_tmp_buf_bpp -
> > > > + data_phy_cycles *
> > > > + dsi->lanes - 18;
> > > > + } else {
> > > > + DRM_WARN("HFP less than d-phy, FPS will under 60Hz\n");
> > > > + horizontal_frontporch_byte = vm->hfront_porch *
> > > > + dsi_tmp_buf_bpp;
> > > > + }
> > > > + } else {
> > > > + if (vm->hfront_porch * dsi_tmp_buf_bpp >
> > > > + data_phy_cycles * dsi->lanes + 12) {
> > > > + horizontal_frontporch_byte = vm->hfront_porch *
> > > > + dsi_tmp_buf_bpp -
> > > > + data_phy_cycles *
> > > > + dsi->lanes - 12;
> > > > + } else {
> > > > + DRM_WARN("HFP less than d-phy, FPS will under 60Hz\n");
> > > > + horizontal_frontporch_byte = vm->hfront_porch *
> > > > + dsi_tmp_buf_bpp;
> > > > + }
> > > > + }
> > > >
> > > > writel(horizontal_sync_active_byte, dsi->regs + DSI_HSA_WC);
> > > > writel(horizontal_backporch_byte, dsi->regs + DSI_HBP_WC);
> > > > @@ -537,8 +598,7 @@ static int mtk_dsi_poweron(struct mtk_dsi *dsi)
> > > > {
> > > > struct device *dev = dsi->host.dev;
> > > > int ret;
> > > > - u64 pixel_clock, total_bits;
> > > > - u32 htotal, htotal_bits, bit_per_pixel, overhead_cycles, overhead_bits;
> > > > + u32 bit_per_pixel;
> > > >
> > > > if (++dsi->refcount != 1)
> > > > return 0;
> > > > @@ -557,24 +617,8 @@ static int mtk_dsi_poweron(struct mtk_dsi *dsi)
> > > > break;
> > > > }
> > > >
> > > > - /**
> > > > - * htotal_time = htotal * byte_per_pixel / num_lanes
> > > > - * overhead_time = lpx + hs_prepare + hs_zero + hs_trail + hs_exit
> > > > - * mipi_ratio = (htotal_time + overhead_time) / htotal_time
> > > > - * data_rate = pixel_clock * bit_per_pixel * mipi_ratio / num_lanes;
> > > > - */
> > > > - pixel_clock = dsi->vm.pixelclock;
> > > > - htotal = dsi->vm.hactive + dsi->vm.hback_porch + dsi->vm.hfront_porch +
> > > > - dsi->vm.hsync_len;
> > > > - htotal_bits = htotal * bit_per_pixel;
> > > > -
> > > > - overhead_cycles = T_LPX + T_HS_PREP + T_HS_ZERO + T_HS_TRAIL +
> > > > - T_HS_EXIT;
> > > > - overhead_bits = overhead_cycles * dsi->lanes * 8;
> > > > - total_bits = htotal_bits + overhead_bits;
> > > > -
> > > > - dsi->data_rate = DIV_ROUND_UP_ULL(pixel_clock * total_bits,
> > > > - htotal * dsi->lanes);
> > > > + dsi->data_rate = DIV_ROUND_UP_ULL(dsi->vm.pixelclock * bit_per_pixel,
> > > > + dsi->lanes);
> > > >
> > > > ret = clk_set_rate(dsi->hs_clk, dsi->data_rate);
> > > > if (ret < 0) {
> > >
> > >
> > > _______________________________________________
> > > dri-devel mailing list
> > > dri-devel at lists.freedesktop.org
> > > https://lists.freedesktop.org/mailman/listinfo/dri-devel
>
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek
More information about the dri-devel
mailing list