[PATCH v4 2/7] drm: rcar-du: lvds: Improve identification of panels

Laurent Pinchart laurent.pinchart at ideasonboard.com
Fri Dec 13 21:21:35 UTC 2019


Hi Fabrizio,

Thank you for the patch.

On Fri, Dec 06, 2019 at 04:32:49PM +0000, Fabrizio Castro wrote:
> Dual-LVDS panels are mistakenly identified as bridges, this
> commit replaces the current logic with a call to
> drm_of_find_panel_or_bridge to sort that out.
> 
> Signed-off-by: Fabrizio Castro <fabrizio.castro at bp.renesas.com>
> 
> ---
> v3->v4:
> * New patch extracted from patch:
>   "drm: rcar-du: lvds: Add dual-LVDS panels support"
> ---
>  drivers/gpu/drm/rcar-du/rcar_lvds.c | 45 +++++++++----------------------------
>  1 file changed, 10 insertions(+), 35 deletions(-)
> 
> diff --git a/drivers/gpu/drm/rcar-du/rcar_lvds.c b/drivers/gpu/drm/rcar-du/rcar_lvds.c
> index 8c6c172..3cb0a83 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_lvds.c
> +++ b/drivers/gpu/drm/rcar-du/rcar_lvds.c
> @@ -21,6 +21,7 @@
>  #include <drm/drm_atomic.h>
>  #include <drm/drm_atomic_helper.h>
>  #include <drm/drm_bridge.h>
> +#include <drm/drm_of.h>
>  #include <drm/drm_panel.h>
>  #include <drm/drm_probe_helper.h>
>  
> @@ -705,10 +706,7 @@ static int rcar_lvds_parse_dt_companion(struct rcar_lvds *lvds)
>  static int rcar_lvds_parse_dt(struct rcar_lvds *lvds)
>  {
>  	struct device_node *local_output = NULL;
> -	struct device_node *remote_input = NULL;
>  	struct device_node *remote = NULL;
> -	struct device_node *node;
> -	bool is_bridge = false;
>  	int ret = 0;
>  
>  	local_output = of_graph_get_endpoint_by_regs(lvds->dev->of_node, 1, 0);
> @@ -736,45 +734,22 @@ static int rcar_lvds_parse_dt(struct rcar_lvds *lvds)
>  		goto done;
>  	}

I think you can remove the calls above this too.
drm_of_find_panel_or_bridge() calls of_graph_get_remote_node(), which in
turn calls of_graph_get_endpoint_by_regs(),
of_graph_get_remote_port_parent() and checks the status of the remote
with of_device_is_available().

>  
> -	remote_input = of_graph_get_remote_endpoint(local_output);
> -
> -	for_each_endpoint_of_node(remote, node) {
> -		if (node != remote_input) {
> -			/*
> -			 * We've found one endpoint other than the input, this
> -			 * must be a bridge.
> -			 */
> -			is_bridge = true;
> -			of_node_put(node);
> -			break;
> -		}
> -	}
> -
> -	if (is_bridge) {
> -		lvds->next_bridge = of_drm_find_bridge(remote);
> -		if (!lvds->next_bridge) {
> -			ret = -EPROBE_DEFER;
> -			goto done;
> -		}
> +	ret = drm_of_find_panel_or_bridge(lvds->dev->of_node, 1, 0,
> +					  &lvds->panel, &lvds->next_bridge);
> +	if (ret)
> +		goto done;
>  
> -		if (lvds->info->quirks & RCAR_LVDS_QUIRK_DUAL_LINK)
> -			lvds->dual_link = lvds->next_bridge->timings
> -					? lvds->next_bridge->timings->dual_link
> -					: false;
> -	} else {
> -		lvds->panel = of_drm_find_panel(remote);
> -		if (IS_ERR(lvds->panel)) {
> -			ret = PTR_ERR(lvds->panel);
> -			goto done;
> -		}
> -	}
> +	if ((lvds->info->quirks & RCAR_LVDS_QUIRK_DUAL_LINK) &&
> +	    lvds->next_bridge)
> +		lvds->dual_link = lvds->next_bridge->timings
> +				? lvds->next_bridge->timings->dual_link
> +				: false;
>  
>  	if (lvds->dual_link)
>  		ret = rcar_lvds_parse_dt_companion(lvds);
>  
>  done:
>  	of_node_put(local_output);
> -	of_node_put(remote_input);
>  	of_node_put(remote);
>  
>  	/*

-- 
Regards,

Laurent Pinchart


More information about the dri-devel mailing list