[PATCH v20 2/2] drm/bridge: Add I2C based driver for ps8640 bridge
Matthias Brugger
matthias.bgg at gmail.com
Sun Dec 15 01:22:44 UTC 2019
On 07/10/2019 10:22, Ulrich Hecht wrote:
> From: Jitao Shi <jitao.shi at mediatek.com>
>
> This patch adds drm_bridge driver for parade DSI to eDP bridge chip.
>
> Signed-off-by: Jitao Shi <jitao.shi at mediatek.com>
> Reviewed-by: Daniel Kurtz <djkurtz at chromium.org>
> Reviewed-by: Enric Balletbo i Serra <enric.balletbo at collabora.com>
> [uli: followed API changes, removed FW update feature]
> Signed-off-by: Ulrich Hecht <uli at fpond.eu>
> ---
>
> Changes since v19:
> - fixed return value of ps8640_probe() when no panel is found
>
> Changes since v18:
> - followed DRM API changes
> - use DEVICE_ATTR_RO()
> - remove firmware update code
> - add SPDX identifier
>
> Changes since v17:
> - remove some unused head files.
> - add macros for ps8640 pages.
> - remove ddc_i2c client
> - add mipi_dsi_device_register_full
> - remove the manufacturer from the name and i2c_device_id
>
> Changes since v16:
> - Disable ps8640 DSI MCS Function.
> - Rename gpios name more clearly.
> - Tune the ps8640 power on sequence.
>
> Changes since v15:
> - Drop drm_connector_(un)register calls from parade ps8640.
> The main DRM driver mtk_drm_drv now calls
> drm_connector_register_all() after drm_dev_register() in the
> mtk_drm_bind() function. That function should iterate over all
> connectors and call drm_connector_register() for each of them.
> So, remove drm_connector_(un)register calls from parade ps8640.
>
> Changes since v14:
> - update copyright info.
> - change bridge_to_ps8640 and connector_to_ps8640 to inline function.
> - fix some coding style.
> - use sizeof as array counter.
> - use drm_get_edid when read edid.
> - add mutex when firmware updating.
>
> Changes since v13:
> - add const on data, ps8640_write_bytes(struct i2c_client *client, const u8 *data, u16 data_len)
> - fix PAGE2_SW_REST tyro.
> - move the buf[3] init to entrance of the function.
>
> Changes since v12:
> - fix hw_chip_id build warning
>
> Changes since v11:
> - Remove depends on I2C, add DRM depends
> - Reuse ps8640_write_bytes() in ps8640_write_byte()
> - Use timer check for polling like the routines in <linux/iopoll.h>
> - Fix no drm_connector_unregister/drm_connector_cleanup when ps8640_bridge_attach fail
> - Check the ps8640 hardware id in ps8640_validate_firmware
> - Remove fw_version check
> - Move ps8640_validate_firmware before ps8640_enter_bl
> - Add ddc_i2c unregister when probe fail and ps8640_remove
>
>
> drivers/gpu/drm/bridge/Kconfig | 12 +
> drivers/gpu/drm/bridge/Makefile | 1 +
> drivers/gpu/drm/bridge/parade-ps8640.c | 672 +++++++++++++++++++++++++++++++++
> 3 files changed, 685 insertions(+)
> create mode 100644 drivers/gpu/drm/bridge/parade-ps8640.c
>
> diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
> index 1cc9f50..61c6415 100644
> --- a/drivers/gpu/drm/bridge/Kconfig
> +++ b/drivers/gpu/drm/bridge/Kconfig
> @@ -82,6 +82,18 @@ config DRM_PARADE_PS8622
> ---help---
> Parade eDP-LVDS bridge chip driver.
>
> +config DRM_PARADE_PS8640
> + tristate "Parade PS8640 MIPI DSI to eDP Converter"
> + depends on DRM
> + depends on OF
> + select DRM_KMS_HELPER
> + select DRM_MIPI_DSI
> + select DRM_PANEL
> + help
> + Choose this option if you have PS8640 for display
> + The PS8640 is a high-performance and low-power
> + MIPI DSI to eDP converter
> +
> config DRM_SIL_SII8620
> tristate "Silicon Image SII8620 HDMI/MHL bridge"
> depends on OF
> diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
> index 4934fcf..14660ab 100644
> --- a/drivers/gpu/drm/bridge/Makefile
> +++ b/drivers/gpu/drm/bridge/Makefile
> @@ -6,6 +6,7 @@ obj-$(CONFIG_DRM_LVDS_ENCODER) += lvds-encoder.o
> obj-$(CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW) += megachips-stdpxxxx-ge-b850v3-fw.o
> obj-$(CONFIG_DRM_NXP_PTN3460) += nxp-ptn3460.o
> obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o
> +obj-$(CONFIG_DRM_PARADE_PS8640) += parade-ps8640.o
> obj-$(CONFIG_DRM_SIL_SII8620) += sil-sii8620.o
> obj-$(CONFIG_DRM_SII902X) += sii902x.o
> obj-$(CONFIG_DRM_SII9234) += sii9234.o
> diff --git a/drivers/gpu/drm/bridge/parade-ps8640.c b/drivers/gpu/drm/bridge/parade-ps8640.c
> new file mode 100644
> index 0000000..ac27010
> --- /dev/null
> +++ b/drivers/gpu/drm/bridge/parade-ps8640.c
> @@ -0,0 +1,672 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2016 MediaTek Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/firmware.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/i2c.h>
> +#include <linux/module.h>
> +#include <linux/of_graph.h>
> +#include <linux/regulator/consumer.h>
> +#include <asm/unaligned.h>
> +#include <drm/drm_panel.h>
> +
> +#include <drm/drm_atomic_helper.h>
> +#include <drm/drm_crtc_helper.h>
> +#include <drm/drm_edid.h>
> +#include <drm/drm_mipi_dsi.h>
> +#include <drm/drm_print.h>
> +#include <drm/drm_probe_helper.h>
> +
> +#define PAGE1_VSTART 0x6b
> +#define PAGE2_SPI_CFG3 0x82
> +#define I2C_TO_SPI_RESET 0x20
> +#define PAGE2_ROMADD_BYTE1 0x8e
> +#define PAGE2_ROMADD_BYTE2 0x8f
> +#define PAGE2_SWSPI_WDATA 0x90
> +#define PAGE2_SWSPI_RDATA 0x91
> +#define PAGE2_SWSPI_LEN 0x92
> +#define PAGE2_SWSPI_CTL 0x93
> +#define TRIGGER_NO_READBACK 0x05
> +#define TRIGGER_READBACK 0x01
> +#define PAGE2_SPI_STATUS 0x9e
> +#define SPI_READY 0x0c
> +#define PAGE2_GPIO_L 0xa6
> +#define PAGE2_GPIO_H 0xa7
> +#define PS_GPIO9 BIT(1)
> +#define PAGE2_IROM_CTRL 0xb0
> +#define IROM_ENABLE 0xc0
> +#define IROM_DISABLE 0x80
> +#define PAGE2_SW_RESET 0xbc
> +#define SPI_SW_RESET BIT(7)
> +#define MPU_SW_RESET BIT(6)
> +#define PAGE2_ENCTLSPI_WR 0xda
> +#define PAGE2_I2C_BYPASS 0xea
> +#define I2C_BYPASS_EN 0xd0
> +#define PAGE2_MCS_EN 0xf3
> +#define MCS_EN BIT(0)
> +#define PAGE3_SET_ADD 0xfe
> +#define PAGE3_SET_VAL 0xff
> +#define VDO_CTL_ADD 0x13
> +#define VDO_DIS 0x18
> +#define VDO_EN 0x1c
> +#define PAGE4_REV_L 0xf0
> +#define PAGE4_REV_H 0xf1
> +#define PAGE4_CHIP_L 0xf2
> +#define PAGE4_CHIP_H 0xf3
> +
> +#define PAGE0_DP_CNTL 0
> +#define PAGE1_VDO_BDG 1
> +#define PAGE2_TOP_CNTL 2
> +#define PAGE3_DSI_CNTL1 3
> +#define PAGE4_MIPI_PHY 4
> +#define PAGE5_VPLL 5
> +#define PAGE6_DSI_CNTL2 6
> +#define PAGE7_SPI_CNTL 7
> +#define MAX_DEVS 0x8
> +
> +struct ps8640_info {
> + u8 family_id;
> + u8 variant_id;
> + u16 version;
> +};
> +
> +struct ps8640 {
> + struct drm_connector connector;
> + struct drm_bridge bridge;
> + struct edid *edid;
> + struct mipi_dsi_device *dsi;
> + struct i2c_client *page[MAX_DEVS];
> + struct regulator_bulk_data supplies[2];
> + struct drm_panel *panel;
> + struct gpio_desc *gpio_reset;
> + struct gpio_desc *gpio_power_down;
> + struct gpio_desc *gpio_mode_sel;
> + bool enabled;
> +
> + /* firmware file info */
> + struct ps8640_info info;
> + bool in_fw_update;
> + /* for firmware update protect */
> + struct mutex fw_mutex;
> +};
> +
> +static const u8 enc_ctrl_code[6] = { 0xaa, 0x55, 0x50, 0x41, 0x52, 0x44 };
> +static const u8 hw_chip_id[4] = { 0x00, 0x0a, 0x00, 0x30 };
> +
> +static inline struct ps8640 *bridge_to_ps8640(struct drm_bridge *e)
> +{
> + return container_of(e, struct ps8640, bridge);
> +}
> +
> +static inline struct ps8640 *connector_to_ps8640(struct drm_connector *e)
> +{
> + return container_of(e, struct ps8640, connector);
> +}
> +
> +static int ps8640_read(struct i2c_client *client, u8 reg, u8 *data,
> + u16 data_len)
> +{
> + int ret;
> + struct i2c_msg msgs[] = {
> + {
> + .addr = client->addr,
> + .flags = 0,
> + .len = 1,
> + .buf = ®,
> + },
> + {
> + .addr = client->addr,
> + .flags = I2C_M_RD,
> + .len = data_len,
> + .buf = data,
> + }
> + };
> +
> + ret = i2c_transfer(client->adapter, msgs, 2);
> +
> + if (ret == 2)
> + return 0;
> + if (ret < 0)
> + return ret;
> + else
> + return -EIO;
> +}
> +
> +static int ps8640_write_bytes(struct i2c_client *client, const u8 *data,
> + u16 data_len)
> +{
> + int ret;
> + struct i2c_msg msg;
> +
> + msg.addr = client->addr;
> + msg.flags = 0;
> + msg.len = data_len;
> + msg.buf = (u8 *)data;
> +
> + ret = i2c_transfer(client->adapter, &msg, 1);
> + if (ret == 1)
> + return 0;
> + if (ret < 0)
> + return ret;
> + else
> + return -EIO;
> +}
> +
> +static int ps8640_write_byte(struct i2c_client *client, u8 reg, u8 data)
> +{
> + u8 buf[] = { reg, data };
> +
> + return ps8640_write_bytes(client, buf, sizeof(buf));
> +}
> +
> +static void ps8640_get_mcu_fw_version(struct ps8640 *ps_bridge)
> +{
> + struct i2c_client *client = ps_bridge->page[PAGE5_VPLL];
> + u8 fw_ver[2];
> +
> + ps8640_read(client, 0x4, fw_ver, sizeof(fw_ver));
> + ps_bridge->info.version = (fw_ver[0] << 8) | fw_ver[1];
> +
> + DRM_INFO_ONCE("ps8640 rom fw version %d.%d\n", fw_ver[0], fw_ver[1]);
> +}
> +
> +static int ps8640_bridge_unmute(struct ps8640 *ps_bridge)
> +{
> + struct i2c_client *client = ps_bridge->page[PAGE3_DSI_CNTL1];
> + u8 vdo_ctrl_buf[3] = { PAGE3_SET_ADD, VDO_CTL_ADD, VDO_EN };
> +
> + return ps8640_write_bytes(client, vdo_ctrl_buf, sizeof(vdo_ctrl_buf));
> +}
> +
> +static int ps8640_bridge_mute(struct ps8640 *ps_bridge)
> +{
> + struct i2c_client *client = ps_bridge->page[PAGE3_DSI_CNTL1];
> + u8 vdo_ctrl_buf[3] = { PAGE3_SET_ADD, VDO_CTL_ADD, VDO_DIS };
> +
> + return ps8640_write_bytes(client, vdo_ctrl_buf, sizeof(vdo_ctrl_buf));
> +}
> +
> +static void ps8640_pre_enable(struct drm_bridge *bridge)
> +{
> + struct ps8640 *ps_bridge = bridge_to_ps8640(bridge);
> + struct i2c_client *client = ps_bridge->page[PAGE2_TOP_CNTL];
> + struct i2c_client *page1 = ps_bridge->page[PAGE1_VDO_BDG];
> + int err;
> + u8 set_vdo_done, mcs_en, vstart;
> + ktime_t timeout;
> +
> + if (ps_bridge->in_fw_update)
> + return;
> +
> + if (ps_bridge->enabled)
> + return;
> +
> + err = drm_panel_prepare(ps_bridge->panel);
> + if (err < 0) {
> + DRM_ERROR("failed to prepare panel: %d\n", err);
> + return;
> + }
> +
> + err = regulator_bulk_enable(ARRAY_SIZE(ps_bridge->supplies),
> + ps_bridge->supplies);
> + if (err < 0) {
> + DRM_ERROR("cannot enable regulators %d\n", err);
> + goto err_panel_unprepare;
> + }
> +
> + gpiod_set_value(ps_bridge->gpio_power_down, 1);
> + gpiod_set_value(ps_bridge->gpio_reset, 0);
> + usleep_range(2000, 2500);
> + gpiod_set_value(ps_bridge->gpio_reset, 1);
> +
> + /*
> + * Wait for the ps8640 embed mcu ready
> + * First wait 200ms and then check the mcu ready flag every 20ms
> + */
> + msleep(200);
> +
> + timeout = ktime_add_ms(ktime_get(), 200);
> + for (;;) {
> + err = ps8640_read(client, PAGE2_GPIO_H, &set_vdo_done, 1);
> + if (err < 0) {
> + DRM_ERROR("failed read PAGE2_GPIO_H: %d\n", err);
> + goto err_regulators_disable;
> + }
> + if ((set_vdo_done & PS_GPIO9) == PS_GPIO9)
> + break;
> + if (ktime_compare(ktime_get(), timeout) > 0)
> + break;
> + msleep(20);
> + }
> +
> + msleep(50);
> +
> + ps8640_read(page1, PAGE1_VSTART, &vstart, 1);
> + DRM_INFO("PS8640 PAGE1.0x6B = 0x%x\n", vstart);
> +
> + /**
> + * The Manufacturer Command Set (MCS) is a device dependent interface
> + * intended for factory programming of the display module default
> + * parameters. Once the display module is configured, the MCS shall be
> + * disabled by the manufacturer. Once disabled, all MCS commands are
> + * ignored by the display interface.
> + */
> + ps8640_read(client, PAGE2_MCS_EN, &mcs_en, 1);
> + ps8640_write_byte(client, PAGE2_MCS_EN, mcs_en & ~MCS_EN);
> +
> + if (ps_bridge->info.version == 0)
> + ps8640_get_mcu_fw_version(ps_bridge);
> +
> + err = ps8640_bridge_unmute(ps_bridge);
> + if (err)
> + DRM_ERROR("failed to enable unmutevideo: %d\n", err);
> + /* Switch access edp panel's edid through i2c */
> + ps8640_write_byte(client, PAGE2_I2C_BYPASS, I2C_BYPASS_EN);
> + ps_bridge->enabled = true;
> +
> + return;
> +
> +err_regulators_disable:
> + regulator_bulk_disable(ARRAY_SIZE(ps_bridge->supplies),
> + ps_bridge->supplies);
> +err_panel_unprepare:
> + drm_panel_unprepare(ps_bridge->panel);
> +}
> +
> +static void ps8640_enable(struct drm_bridge *bridge)
> +{
> + struct ps8640 *ps_bridge = bridge_to_ps8640(bridge);
> + int err;
> +
> + err = drm_panel_enable(ps_bridge->panel);
> + if (err < 0)
> + DRM_ERROR("failed to enable panel: %d\n", err);
> +}
> +
> +static void ps8640_disable(struct drm_bridge *bridge)
> +{
> + struct ps8640 *ps_bridge = bridge_to_ps8640(bridge);
> + int err;
> +
> + err = drm_panel_disable(ps_bridge->panel);
> + if (err < 0)
> + DRM_ERROR("failed to disable panel: %d\n", err);
> +}
> +
> +static void ps8640_post_disable(struct drm_bridge *bridge)
> +{
> + struct ps8640 *ps_bridge = bridge_to_ps8640(bridge);
> + int err;
> +
> + if (ps_bridge->in_fw_update)
> + return;
> +
> + if (!ps_bridge->enabled)
> + return;
> +
> + ps_bridge->enabled = false;
> +
> + err = ps8640_bridge_mute(ps_bridge);
> + if (err < 0)
> + DRM_ERROR("failed to unmutevideo: %d\n", err);
> +
> + gpiod_set_value(ps_bridge->gpio_reset, 0);
> + gpiod_set_value(ps_bridge->gpio_power_down, 0);
> + err = regulator_bulk_disable(ARRAY_SIZE(ps_bridge->supplies),
> + ps_bridge->supplies);
> + if (err < 0)
> + DRM_ERROR("cannot disable regulators %d\n", err);
> +
> + err = drm_panel_unprepare(ps_bridge->panel);
> + if (err)
> + DRM_ERROR("failed to unprepare panel: %d\n", err);
> +}
> +
> +static int ps8640_get_modes(struct drm_connector *connector)
> +{
> + struct ps8640 *ps_bridge = connector_to_ps8640(connector);
> + struct edid *edid;
> + int num_modes = 0;
> + bool power_off;
> +
> + if (ps_bridge->edid)
> + return drm_add_edid_modes(connector, ps_bridge->edid);
> +
> + power_off = !ps_bridge->enabled;
> + ps8640_pre_enable(&ps_bridge->bridge);
> +
> + edid = drm_get_edid(connector, ps_bridge->page[0]->adapter);
> + if (!edid)
> + goto out;
> +
> + ps_bridge->edid = edid;
> + drm_connector_update_edid_property(connector, ps_bridge->edid);
> + num_modes = drm_add_edid_modes(connector, ps_bridge->edid);
> +
> +out:
> + if (power_off)
> + ps8640_post_disable(&ps_bridge->bridge);
> +
> + return num_modes;
> +}
> +
> +static const struct drm_connector_helper_funcs ps8640_connector_helper_funcs = {
> + .get_modes = ps8640_get_modes,
> +};
> +
> +static enum drm_connector_status ps8640_detect(struct drm_connector *connector,
> + bool force)
> +{
> + return connector_status_connected;
> +}
> +
> +static const struct drm_connector_funcs ps8640_connector_funcs = {
> + .fill_modes = drm_helper_probe_single_connector_modes,
> + .detect = ps8640_detect,
> + .reset = drm_atomic_helper_connector_reset,
> + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
> + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
> +};
> +
> +int ps8640_bridge_attach(struct drm_bridge *bridge)
> +{
> + struct ps8640 *ps_bridge = bridge_to_ps8640(bridge);
> + struct device *dev = &ps_bridge->page[0]->dev;
> + struct device_node *in_ep, *dsi_node = NULL;
> + struct mipi_dsi_device *dsi;
> + struct mipi_dsi_host *host = NULL;
> + int ret;
> + const struct mipi_dsi_device_info info = { .type = "ps8640",
> + .channel = 0,
> + .node = NULL,
> + };
> +
> + ret = drm_connector_init(bridge->dev, &ps_bridge->connector,
> + &ps8640_connector_funcs,
> + DRM_MODE_CONNECTOR_eDP);
> +
> + if (ret) {
> + DRM_ERROR("Failed to initialize connector with drm: %d\n", ret);
> + return ret;
> + }
> +
> + drm_connector_helper_add(&ps_bridge->connector,
> + &ps8640_connector_helper_funcs);
> +
> + ps_bridge->connector.dpms = DRM_MODE_DPMS_ON;
> + drm_connector_attach_encoder(&ps_bridge->connector,
> + bridge->encoder);
> +
> + if (ps_bridge->panel)
> + drm_panel_attach(ps_bridge->panel, &ps_bridge->connector);
> +
> + /* port at 0 is ps8640 dsi input port */
> + in_ep = of_graph_get_endpoint_by_regs(dev->of_node, 0, -1);
> + if (in_ep) {
> + dsi_node = of_graph_get_remote_port_parent(in_ep);
> + of_node_put(in_ep);
> + }
> +
> + if (dsi_node) {
> + host = of_find_mipi_dsi_host_by_node(dsi_node);
> + of_node_put(dsi_node);
> + if (!host) {
> + ret = -ENODEV;
> + goto err;
> + }
> + }
> +
> + dsi = mipi_dsi_device_register_full(host, &info);
> + if (IS_ERR(dsi)) {
> + dev_err(dev, "failed to create dsi device\n");
> + ret = PTR_ERR(dsi);
> + goto err;
> + }
> +
> + ps_bridge->dsi = dsi;
> +
> + dsi->host = host;
> + dsi->mode_flags = MIPI_DSI_MODE_VIDEO |
> + MIPI_DSI_MODE_VIDEO_SYNC_PULSE;
> + dsi->format = MIPI_DSI_FMT_RGB888;
> + dsi->lanes = 4;
> + ret = mipi_dsi_attach(dsi);
> + if (ret)
> + goto err_dsi_attach;
> +
> + return 0;
> +
> +err_dsi_attach:
> + mipi_dsi_device_unregister(dsi);
> +err:
> + if (ps_bridge->panel)
> + drm_panel_detach(ps_bridge->panel);
> + drm_connector_cleanup(&ps_bridge->connector);
> + return ret;
> +}
> +
> +static const struct drm_bridge_funcs ps8640_bridge_funcs = {
> + .attach = ps8640_bridge_attach,
> + .disable = ps8640_disable,
> + .post_disable = ps8640_post_disable,
> + .pre_enable = ps8640_pre_enable,
> + .enable = ps8640_enable,
> +};
> +
> +/* Firmware Version is returned as Major.Minor */
> +static ssize_t fw_version_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct ps8640 *ps_bridge = dev_get_drvdata(dev);
> + struct ps8640_info *info = &ps_bridge->info;
> +
> + return scnprintf(buf, PAGE_SIZE, "%u.%u\n", info->version >> 8,
> + info->version & 0xff);
> +}
> +
> +/* Hardware Version is returned as FamilyID.VariantID */
> +static ssize_t hw_version_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct ps8640 *ps_bridge = dev_get_drvdata(dev);
> + struct ps8640_info *info = &ps_bridge->info;
> +
> + return scnprintf(buf, PAGE_SIZE, "ps%u.%u\n", info->family_id,
> + info->variant_id);
> +}
> +
> +static DEVICE_ATTR_RO(fw_version);
> +static DEVICE_ATTR_RO(hw_version);
> +
> +static struct attribute *ps8640_attrs[] = {
> + &dev_attr_fw_version.attr,
> + &dev_attr_hw_version.attr,
> + NULL
> +};
> +
> +static const struct attribute_group ps8640_attr_group = {
> + .attrs = ps8640_attrs,
> +};
> +
> +static void ps8640_remove_sysfs_group(void *data)
> +{
> + struct ps8640 *ps_bridge = data;
> +
> + sysfs_remove_group(&ps_bridge->page[0]->dev.kobj, &ps8640_attr_group);
> +}
> +
> +static int ps8640_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct device *dev = &client->dev;
> + struct ps8640 *ps_bridge;
> + struct device_node *np = dev->of_node;
> + struct device_node *port, *out_ep;
> + struct device_node *panel_node = NULL;
> + int ret;
> + u32 i;
> +
> + ps_bridge = devm_kzalloc(dev, sizeof(*ps_bridge), GFP_KERNEL);
> + if (!ps_bridge)
> + return -ENOMEM;
> +
> + /* port at 1 is ps8640 output port */
> + port = of_graph_get_port_by_id(np, 1);
> + if (port) {
> + out_ep = of_get_child_by_name(port, "endpoint");
> + of_node_put(port);
> + if (out_ep) {
> + panel_node = of_graph_get_remote_port_parent(out_ep);
> + of_node_put(out_ep);
> + }
> + }
> + if (panel_node) {
> + ps_bridge->panel = of_drm_find_panel(panel_node);
> + of_node_put(panel_node);
> + if (IS_ERR(ps_bridge->panel))
> + return PTR_ERR(ps_bridge->panel);
> + }
> +
> + mutex_init(&ps_bridge->fw_mutex);
> + ps_bridge->supplies[0].supply = "vdd33";
> + ps_bridge->supplies[1].supply = "vdd12";
> + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ps_bridge->supplies),
> + ps_bridge->supplies);
> + if (ret) {
> + dev_info(dev, "failed to get regulators: %d\n", ret);
> + return ret;
> + }
> +
> + ps_bridge->gpio_mode_sel = devm_gpiod_get_optional(&client->dev,
> + "mode-sel",
> + GPIOD_OUT_HIGH);
> + if (IS_ERR(ps_bridge->gpio_mode_sel)) {
> + ret = PTR_ERR(ps_bridge->gpio_mode_sel);
> + dev_err(dev, "cannot get mode-sel %d\n", ret);
> + return ret;
> + }
> +
> + ps_bridge->gpio_power_down = devm_gpiod_get(&client->dev, "sleep",
> + GPIOD_OUT_LOW);
> + if (IS_ERR(ps_bridge->gpio_power_down)) {
> + ret = PTR_ERR(ps_bridge->gpio_power_down);
> + dev_err(dev, "cannot get sleep: %d\n", ret);
> + return ret;
> + }
> +
> + /*
> + * Request the reset pin low to avoid the bridge being
> + * initialized prematurely
> + */
> + ps_bridge->gpio_reset = devm_gpiod_get(&client->dev, "reset",
> + GPIOD_OUT_LOW);
> + if (IS_ERR(ps_bridge->gpio_reset)) {
> + ret = PTR_ERR(ps_bridge->gpio_reset);
> + dev_err(dev, "cannot get reset: %d\n", ret);
> + return ret;
> + }
> +
> + ps_bridge->bridge.funcs = &ps8640_bridge_funcs;
> + ps_bridge->bridge.of_node = dev->of_node;
> +
> + ps_bridge->page[0] = client;
> +
> + /*
> + * ps8640 uses multiple addresses, use dummy devices for them
> + * page[0]: for DP control
> + * page[1]: for VIDEO Bridge
> + * page[2]: for control top
> + * page[3]: for DSI Link Control1
> + * page[4]: for MIPI Phy
> + * page[5]: for VPLL
> + * page[6]: for DSI Link Control2
> + * page[7]: for spi rom mapping
> + */
> + for (i = 1; i < MAX_DEVS; i++) {
> + ps_bridge->page[i] = i2c_new_dummy(client->adapter,
> + client->addr + i);
I think this has changed to i2c_new_dummy_device().
Are you planning to rebase and respin the series?
Regrads,
Matthias
> + if (!ps_bridge->page[i]) {
> + dev_err(dev, "failed i2c dummy device, address%02x\n",
> + client->addr + i);
> + ret = -EBUSY;
> + goto exit_dummy;
> + }
> + }
> + i2c_set_clientdata(client, ps_bridge);
> +
> + ret = sysfs_create_group(&client->dev.kobj, &ps8640_attr_group);
> + if (ret) {
> + dev_err(dev, "failed to create sysfs entries: %d\n", ret);
> + goto exit_dummy;
> + }
> +
> + ret = devm_add_action(dev, ps8640_remove_sysfs_group, ps_bridge);
> + if (ret) {
> + dev_err(dev, "failed to add sysfs cleanup action: %d\n", ret);
> + goto exit_remove_sysfs;
> + }
> +
> + drm_bridge_add(&ps_bridge->bridge);
> + return 0;
> +
> +exit_remove_sysfs:
> + sysfs_remove_group(&ps_bridge->page[0]->dev.kobj, &ps8640_attr_group);
> +exit_dummy:
> + while (--i)
> + i2c_unregister_device(ps_bridge->page[i]);
> + return ret;
> +}
> +
> +static int ps8640_remove(struct i2c_client *client)
> +{
> + struct ps8640 *ps_bridge = i2c_get_clientdata(client);
> + int i = MAX_DEVS;
> +
> + drm_bridge_remove(&ps_bridge->bridge);
> + sysfs_remove_group(&ps_bridge->page[0]->dev.kobj, &ps8640_attr_group);
> + while (--i)
> + i2c_unregister_device(ps_bridge->page[i]);
> +
> + return 0;
> +}
> +
> +static const struct i2c_device_id ps8640_i2c_table[] = {
> + { "ps8640", 0 },
> + { /* sentinel */ },
> +};
> +MODULE_DEVICE_TABLE(i2c, ps8640_i2c_table);
> +
> +static const struct of_device_id ps8640_match[] = {
> + { .compatible = "parade,ps8640" },
> + { /* sentinel */ },
> +};
> +MODULE_DEVICE_TABLE(of, ps8640_match);
> +
> +static struct i2c_driver ps8640_driver = {
> + .id_table = ps8640_i2c_table,
> + .probe = ps8640_probe,
> + .remove = ps8640_remove,
> + .driver = {
> + .name = "ps8640",
> + .of_match_table = ps8640_match,
> + },
> +};
> +module_i2c_driver(ps8640_driver);
> +
> +MODULE_AUTHOR("Jitao Shi <jitao.shi at mediatek.com>");
> +MODULE_AUTHOR("CK Hu <ck.hu at mediatek.com>");
> +MODULE_DESCRIPTION("PARADE ps8640 DSI-eDP converter driver");
> +MODULE_LICENSE("GPL v2");
>
More information about the dri-devel
mailing list