[PATCH v3 5/5] drm/msm/a6xx: Support split pagetables

Rob Clark robdclark at gmail.com
Mon Dec 16 17:43:55 UTC 2019


On Mon, Dec 16, 2019 at 8:38 AM Jordan Crouse <jcrouse at codeaurora.org> wrote:
>
> Attempt to enable split pagetables if the arm-smmu driver supports it.
> This will move the default address space from the default region to
> the address range assigned to TTBR1. The behavior should be transparent
> to the driver for now but it gets the default buffers out of the way
> when we want to start swapping TTBR0 for context-specific pagetables.
>
> Signed-off-by: Jordan Crouse <jcrouse at codeaurora.org>

Reviewed-by: Rob Clark <robdclark at gmail.com>

(my previous r-b's on the other patches from v2 carries over to v3)

> ---
>
>  drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 52 ++++++++++++++++++++++++++++++++++-
>  1 file changed, 51 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
> index 5dc0b2c..1c6da93 100644
> --- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
> +++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
> @@ -811,6 +811,56 @@ static unsigned long a6xx_gpu_busy(struct msm_gpu *gpu)
>         return (unsigned long)busy_time;
>  }
>
> +static struct msm_gem_address_space *
> +a6xx_create_address_space(struct msm_gpu *gpu, struct platform_device *pdev)
> +{
> +       struct iommu_domain *iommu = iommu_domain_alloc(&platform_bus_type);
> +       struct msm_gem_address_space *aspace;
> +       struct msm_mmu *mmu;
> +       u64 start, size;
> +       u32 val = 1;
> +       int ret;
> +
> +       if (!iommu)
> +               return ERR_PTR(-ENOMEM);
> +
> +       /*
> +        * Try to request split pagetables - the request has to be made before
> +        * the domian is attached
> +        */
> +       iommu_domain_set_attr(iommu, DOMAIN_ATTR_SPLIT_TABLES, &val);
> +
> +       mmu = msm_iommu_new(&pdev->dev, iommu);
> +       if (IS_ERR(mmu)) {
> +               iommu_domain_free(iommu);
> +               return ERR_CAST(mmu);
> +       }
> +
> +       /*
> +        * After the domain is attached, see if the split tables were actually
> +        * successful.
> +        */
> +       ret = iommu_domain_get_attr(iommu, DOMAIN_ATTR_SPLIT_TABLES, &val);
> +       if (!ret && val) {
> +               /*
> +                * The aperture start will be at the beginning of the TTBR1
> +                * space so use that as a base
> +                */
> +               start = iommu->geometry.aperture_start;
> +               size = 0xffffffff;
> +       } else {
> +               /* Otherwise use the legacy 32 bit region */
> +               start = SZ_16M;
> +               size = 0xffffffff - SZ_16M;
> +       }
> +
> +       aspace = msm_gem_address_space_create(mmu, "gpu", start, size);
> +       if (IS_ERR(aspace))
> +               iommu_domain_free(iommu);
> +
> +       return aspace;
> +}
> +
>  static const struct adreno_gpu_funcs funcs = {
>         .base = {
>                 .get_param = adreno_get_param,
> @@ -832,7 +882,7 @@ static const struct adreno_gpu_funcs funcs = {
>  #if defined(CONFIG_DRM_MSM_GPU_STATE)
>                 .gpu_state_get = a6xx_gpu_state_get,
>                 .gpu_state_put = a6xx_gpu_state_put,
> -               .create_address_space = adreno_iommu_create_address_space,
> +               .create_address_space = a6xx_create_address_space,
>  #endif
>         },
>         .get_timestamp = a6xx_get_timestamp,
> --
> 2.7.4


More information about the dri-devel mailing list