[PATCH v22 1/2] Documentation: bridge: Add documentation for ps8640 DT properties

[Enric Balletbo i Serra]

Hi Ezequiel,

On 26/12/19 15:27, Ezequiel Garcia wrote:
> Hi Enric, Rob,
> 
> On Mon, 2019-12-23 at 15:35 +0100, Enric Balletbo i Serra wrote:
>> From: Jitao Shi <jitao.shi at mediatek.com>
>>
>> Add documentation for DT properties supported by
>> ps8640 DSI-eDP converter.
>>
>> Signed-off-by: Jitao Shi <jitao.shi at mediatek.com>
>> Acked-by: Rob Herring <robh at kernel.org>
>> Reviewed-by: Philipp Zabel <p.zabel at pengutronix.de>
>> Signed-off-by: Ulrich Hecht <uli at fpond.eu>
>> Signed-off-by: Enric Balletbo i Serra <enric.balletbo at collabora.com>
> [..]
>> +
>> +  ports:
>> +    type: object
>> +    description:
>> +      A node containing DSI input & output port nodes with endpoint
>> +      definitions as documented in
>> +      Documentation/devicetree/bindings/media/video-interfaces.txt
>> +      Documentation/devicetree/bindings/graph.txt
>> +    properties:
>> +      port at 0:
>> +        type: object
>> +        description: |
>> +          Video port for DSI input
>> +
>> +      port at 1:
>> +        type: object
>> +        description: |
>> +          Video port for eDP output (panel or connector).
>> +
>> +    required:
>> +      - port at 0
>> +
> 
> Is it correct to require port at 0 ? This could be called port at 1
> or port at 2, and IIUC it should bind the same.
> 

My understanding is that at least the Video port for DSI input is required,
which makes sense, otherwise you have the chip connected nowhere. port at 1 is
optional because it could be connected to a eDP panel or can just be a connector.

About your second question, I am not sure I understand you. You mean that have a
DT like this should work?

            ports {
                #address-cells = <1>;
                #size-cells = <0>;

                port at 1 {
                    reg = <0>;
                    ps8640_in: endpoint {
                        remote-endpoint = <&dsi0_out>;
                    };
                };

                port at 2 {
                    reg = <1>;
                    ps8640_out: endpoint {
                        remote-endpoint = <&panel_in>;
                   };
                };
            };


Probably yes, because the driver what really looks is the register value, but
that's odd and probably a bad practice. Also if I am not wrong the convention is
name the nodes with port@<reg property> (like we do in i2c devices for example)

port at 0 is the label that has the register value to 0.
port at 1 is the label that has the register value to 1.
...

Thanks,
 Enric

> Thanks,
> Ezequiel 
> 
>> +required:
>> +  - compatible
>> +  - reg
>> +  - powerdown-gpios
>> +  - reset-gpios
>> +  - vdd12-supply
>> +  - vdd33-supply
>> +  - ports
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> +  - |
>> +    #include <dt-bindings/gpio/gpio.h>
>> +    i2c0 {
>> +        #address-cells = <1>;
>> +        #size-cells = <0>;
>> +
>> +        ps8640: edp-bridge at 18 {
>> +            compatible = "parade,ps8640";
>> +            reg = <0x18>;
>> +            powerdown-gpios = <&pio 116 GPIO_ACTIVE_LOW>;
>> +            reset-gpios = <&pio 115 GPIO_ACTIVE_LOW>;
>> +            vdd12-supply = <&ps8640_fixed_1v2>;
>> +            vdd33-supply = <&mt6397_vgp2_reg>;
>> +
>> +            ports {
>> +                #address-cells = <1>;
>> +                #size-cells = <0>;
>> +
>> +                port at 0 {
>> +                    reg = <0>;
>> +                    ps8640_in: endpoint {
>> +                        remote-endpoint = <&dsi0_out>;
>> +                    };
>> +                };
>> +
>> +                port at 1 {
>> +                    reg = <1>;
>> +                    ps8640_out: endpoint {
>> +                        remote-endpoint = <&panel_in>;
>> +                   };
>> +                };
>> +            };
>> +        };
>> +    };
>> +
>> -- 
>> 2.20.1
>>
>>
> 
> 
>