[PATCH] arm: dts: sc7180: Add A618 gpu dt blob

[Bjorn Andersson]

On Tue 03 Dec 07:17 PST 2019, Sharat Masetty wrote:

Please update subject to "arm64: dts: qcom: sc7180: Add A618 GPU nodes"

> This patch adds the required dt nodes and properties
> to enabled A618 GPU.
> 
> Signed-off-by: Sharat Masetty <smasetty at codeaurora.org>
> ---
>  arch/arm64/boot/dts/qcom/sc7180.dtsi | 116 +++++++++++++++++++++++++++++++++++
>  1 file changed, 116 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> index c3db2e5..31223d0 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> @@ -18,6 +18,8 @@
>  #include <dt-bindings/reset/qcom,sdm845-pdc.h>
>  #include <dt-bindings/soc/qcom,rpmh-rsc.h>
>  #include <dt-bindings/phy/phy-qcom-qusb2.h>
> +#include <dt-bindings/clock/qcom,gpucc-sc7180.h>
> +#include <dt-bindings/power/qcom-rpmpd.h>

Please maintain sort order of includes.

> 
>  / {
>  	interrupt-parent = <&intc>;
> @@ -733,6 +735,120 @@
>  			#power-domain-cells = <1>;
>  		};
> 
> +		gpu: gpu at 5000000 {

Please rebase this on linux-next and ensure to maintain the sort order.

> +			compatible = "qcom,adreno-618.0", "qcom,adreno";
> +			#stream-id-cells = <16>;
> +			reg = <0 0x5000000 0 0x40000>, <0 0x509e000 0 0x1000>,

Please pad addresses to 8 digits.

> +				<0 0x5061000 0 0x800>;
> +			reg-names = "kgsl_3d0_reg_memory", "cx_mem", "cx_dbgc";
> +
> +			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
> +
> +			iommus = <&adreno_smmu 0>;
> +
> +			operating-points-v2 = <&gpu_opp_table>;
> +
> +			interconnects = <&gem_noc 35 &mc_virt 512>;

Please use the defines for these ports.

> +
> +			qcom,gmu = <&gmu>;

You can reduce the number of empty lines above.

> +
> +			gpu_opp_table: opp-table {
> +				compatible = "operating-points-v2";
> +
> +				opp-800000000 {
> +					opp-hz = /bits/ 64 <800000000>;
> +					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
> +				};
> +
> +				opp-650000000 {
> +					opp-hz = /bits/ 64 <650000000>;
> +					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
> +				};
> +
> +				opp-565000000 {
> +					opp-hz = /bits/ 64 <565000000>;
> +					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
> +				};
> +
> +				opp-430000000 {
> +					opp-hz = /bits/ 64 <430000000>;
> +					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
> +				};
> +
> +                                opp-355000000 {

The indentation is off here.

> +					opp-hz = /bits/ 64 <355000000>;
> +					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
> +				};
> +
> +                                opp-267000000 {

And here.

> +					opp-hz = /bits/ 64 <267000000>;
> +					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
> +				};
> +
> +				opp-180000000 {
> +					opp-hz = /bits/ 64 <180000000>;
> +					opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
> +				};
> +			};
> +		};
> +
> +		adreno_smmu: iommu at 5040000 {
> +			compatible = "qcom,sc7180-smmu-v2", "qcom,smmu-v2";
> +			reg = <0 0x5040000 0 0x10000>;
> +			#iommu-cells = <1>;
> +			#global-interrupts = <2>;
> +			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 364 IRQ_TYPE_EDGE_RISING>,
> +					<GIC_SPI 365 IRQ_TYPE_EDGE_RISING>,
> +					<GIC_SPI 366 IRQ_TYPE_EDGE_RISING>,
> +					<GIC_SPI 367 IRQ_TYPE_EDGE_RISING>,
> +					<GIC_SPI 368 IRQ_TYPE_EDGE_RISING>,
> +					<GIC_SPI 369 IRQ_TYPE_EDGE_RISING>,
> +					<GIC_SPI 370 IRQ_TYPE_EDGE_RISING>,
> +					<GIC_SPI 371 IRQ_TYPE_EDGE_RISING>;
> +			clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
> +				<&gcc GCC_GPU_CFG_AHB_CLK>,
> +				<&gcc GCC_DDRSS_GPU_AXI_CLK>;
> +
> +			clock-names = "bus", "iface", "mem_iface_clk";
> +			power-domains = <&gpucc CX_GDSC>;
> +		};
> +
> +		gmu: gmu at 506a000 {
> +			compatible="qcom,adreno-gmu-618", "qcom,adreno-gmu";
> +
> +			reg = 	<0 0x506a000 0 0x31000>,

Extra spaces after =

> +				<0 0xb290000 0 0x10000>,
> +				<0 0xb490000 0 0x10000>;
> +			reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq";
> +
> +			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
> +				   <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "hfi", "gmu";
> +
> +			clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
> +			       <&gpucc GPU_CC_CXO_CLK>,
> +			       <&gcc GCC_DDRSS_GPU_AXI_CLK>,
> +			       <&gcc GCC_GPU_MEMNOC_GFX_CLK>;
> +			clock-names = "gmu", "cxo", "axi", "memnoc";
> +
> +			power-domains = <&gpucc CX_GDSC>;
> +
> +			iommus = <&adreno_smmu 5>;
> +
> +			operating-points-v2 = <&gmu_opp_table>;

As above, please drop a few of these empty lines.

Regards,
Bjorn

> +
> +			gmu_opp_table: opp-table {
> +				compatible = "operating-points-v2";
> +
> +				opp-200000000 {
> +					opp-hz = /bits/ 64 <200000000>;
> +					opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
> +				};
> +			};
> +		};
> +
>  		apps_smmu: iommu at 15000000 {
>  			compatible = "qcom,sc7180-smmu-500", "arm,mmu-500";
>  			reg = <0 0x15000000 0 0x100000>;
> --
> 1.9.1
>