[PATCH v2] drm: Move radeon and amdgpu Kconfig options into their directories

[Andrew F. Davis]

Most Kconfig options to enable a driver are in the Kconfig file
inside the relevant directory, move these two to the same.

Signed-off-by: Andrew F. Davis <afd at ti.com>
---

Changes from v1:
 - Rebased

 drivers/gpu/drm/Kconfig            | 34 ------------------------------
 drivers/gpu/drm/amd/amdgpu/Kconfig | 18 ++++++++++++++++
 drivers/gpu/drm/radeon/Kconfig     | 18 ++++++++++++++++
 3 files changed, 36 insertions(+), 34 deletions(-)

diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index bfdadc3667e0..714ae842b7ce 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -231,42 +231,8 @@ source "drivers/gpu/drm/i2c/Kconfig"
 
 source "drivers/gpu/drm/arm/Kconfig"
 
-config DRM_RADEON
-	tristate "ATI Radeon"
-	depends on DRM && PCI && MMU
-	select FW_LOADER
-        select DRM_KMS_HELPER
-        select DRM_TTM
-	select POWER_SUPPLY
-	select HWMON
-	select BACKLIGHT_CLASS_DEVICE
-	select INTERVAL_TREE
-	help
-	  Choose this option if you have an ATI Radeon graphics card.  There
-	  are both PCI and AGP versions.  You don't need to choose this to
-	  run the Radeon in plain VGA mode.
-
-	  If M is selected, the module will be called radeon.
-
 source "drivers/gpu/drm/radeon/Kconfig"
 
-config DRM_AMDGPU
-	tristate "AMD GPU"
-	depends on DRM && PCI && MMU
-	select FW_LOADER
-	select DRM_KMS_HELPER
-	select DRM_SCHED
-	select DRM_TTM
-	select POWER_SUPPLY
-	select HWMON
-	select BACKLIGHT_CLASS_DEVICE
-	select INTERVAL_TREE
-	select CHASH
-	help
-	  Choose this option if you have a recent AMD Radeon graphics card.
-
-	  If M is selected, the module will be called amdgpu.
-
 source "drivers/gpu/drm/amd/amdgpu/Kconfig"
 
 source "drivers/gpu/drm/nouveau/Kconfig"
diff --git a/drivers/gpu/drm/amd/amdgpu/Kconfig b/drivers/gpu/drm/amd/amdgpu/Kconfig
index 9375e7f12420..f6100cb193fb 100644
--- a/drivers/gpu/drm/amd/amdgpu/Kconfig
+++ b/drivers/gpu/drm/amd/amdgpu/Kconfig
@@ -1,4 +1,22 @@
 # SPDX-License-Identifier: MIT
+
+config DRM_AMDGPU
+	tristate "AMD GPU"
+	depends on DRM && PCI && MMU
+	select FW_LOADER
+	select DRM_KMS_HELPER
+	select DRM_SCHED
+	select DRM_TTM
+	select POWER_SUPPLY
+	select HWMON
+	select BACKLIGHT_CLASS_DEVICE
+	select INTERVAL_TREE
+	select CHASH
+	help
+	  Choose this option if you have a recent AMD Radeon graphics card.
+
+	  If M is selected, the module will be called amdgpu.
+
 config DRM_AMDGPU_SI
 	bool "Enable amdgpu support for SI parts"
 	depends on DRM_AMDGPU
diff --git a/drivers/gpu/drm/radeon/Kconfig b/drivers/gpu/drm/radeon/Kconfig
index 6f60f4840cc5..ba67b879d31d 100644
--- a/drivers/gpu/drm/radeon/Kconfig
+++ b/drivers/gpu/drm/radeon/Kconfig
@@ -1,4 +1,22 @@
 # SPDX-License-Identifier: GPL-2.0-only
+
+config DRM_RADEON
+	tristate "ATI Radeon"
+	depends on DRM && PCI && MMU
+	select FW_LOADER
+	select DRM_KMS_HELPER
+	select DRM_TTM
+	select POWER_SUPPLY
+	select HWMON
+	select BACKLIGHT_CLASS_DEVICE
+	select INTERVAL_TREE
+	help
+	  Choose this option if you have an ATI Radeon graphics card.  There
+	  are both PCI and AGP versions.  You don't need to choose this to
+	  run the Radeon in plain VGA mode.
+
+	  If M is selected, the module will be called radeon.
+
 config DRM_RADEON_USERPTR
 	bool "Always enable userptr support"
 	depends on DRM_RADEON
-- 
2.17.1